+Schmitzi Posted January 9, 2016 Share Posted January 9, 2016 . Meanwhile, small XMas in Cologne 10 Quote Link to comment Share on other sites More sharing options...
globeron Posted January 9, 2016 Share Posted January 9, 2016 Arrived Mechatronic-80column-RMS--01.jpg Mechatronic-80column-RMS--02.jpg Mechatronic-80column-RMS--03.jpg Mechatronic-80column-RMS--05.jpg The Mechatronic 80 column version, I recognise it with the Scart plug. (I am not totally up to speed with the F18A and 80 columns, but it seems I have some 80 column programs that probably work with this card and not with F18A, at least I did not got it to work), nor sure if there is a difference, but let me try to find it (and post in the 80 column forum) 3 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted January 9, 2016 Share Posted January 9, 2016 OK, I finally got around to doing this. Here is my TI 99/4a setup. Hey, is that a TouchPad under the window?? Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 9, 2016 Share Posted January 9, 2016 The Mechatronic 80 column version, I recognise it with the Scart plug. (I am not totally up to speed with the F18A and 80 columns, but it seems I have some 80 column programs that probably work with this card and not with F18A, at least I did not got it to work), nor sure if there is a difference, but let me try to find it (and post in the 80 column forum) yes, very nice Maybe you find something we don´t have on the F18A/80col-list thanks Quote Link to comment Share on other sites More sharing options...
mantadoc Posted January 9, 2016 Share Posted January 9, 2016 Here some of my systems from back year 1985 or something to now Picture TI1 ,TI2,TI3 the most used system, today build in CF card reader in Speech ,connected to Ide card in PE-box ,5 volt from speech PCB, homepaintet PE-BOX Picture TI4 Atronic CPC99 system Picture TI5 SNUG complete computer Picture TI6 Myarc Geneve , homepaintet PE BOX Picture TI8 CC9900 Expansion BOX Picture TI9 Ti99/4 system , need to find 32k to complete it and change to Ti99/4 computer Picture TI10 some stuff ,as is the next projects, when i get the time 11 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted January 10, 2016 Share Posted January 10, 2016 Speechless!!! 2 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 10, 2016 Share Posted January 10, 2016 Speechless!!! I have a spare speechsynthie;) 2 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 10, 2016 Share Posted January 10, 2016 MantaDoc, if you need help with some some cleanup, or just a list with your goodies, or anything else, just let me know, I am not sooo far away from you at all.... It is also no problem to let me alone in your TI-room 2 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 10, 2016 Share Posted January 10, 2016 Ooohh, lots of nice things in there, Mantadoc! Looking at that last picture, you seem to have a Myarc personality Card (or at least you have the Myarc SASI drive that goes with it) and hidden underneath I see the fourth confirmed Myarc MPES-50 in the hands of one of the members of this group. One of these days I'll capture an Atronic CPS-99, but they don't come up for sale all that often, unfortunately. Your 99/4 setup is actually missing three sidecars: 32K, P-Code, and Video Controller. There are between 5 and 10 of the Sidecar Video Controllers out there, but I only know of two surviving copies of the P-Code box (one is a prototype and the other is a production box). Mine is the production box, someone else bought the prototype from Mike Dudeck about 10 years ago and I haven't heard anything about where it might be since. 3 Quote Link to comment Share on other sites More sharing options...
+jedimatt42 Posted January 10, 2016 Share Posted January 10, 2016 Here some of my systems from back year 1985 or something to now ... Those are some creative setups. Thank you for sharing! The fully beige system setup is pretty cool, beige from the keyboard, through the flex-cable boot to the monitor. Never seen anything like that before. -M@ 1 Quote Link to comment Share on other sites More sharing options...
mantadoc Posted January 10, 2016 Share Posted January 10, 2016 Ooohh, lots of nice things in there, Mantadoc! Looking at that last picture, you seem to have a Myarc personality Card (or at least you have the Myarc SASI drive that goes with it) and hidden underneath I see the fourth confirmed Myarc MPES-50 in the hands of one of the members of this group. One of these days I'll capture an Atronic CPS-99, but they don't come up for sale all that often, unfortunately. Your 99/4 setup is actually missing three sidecars: 32K, P-Code, and Video Controller. There are between 5 and 10 of the Sidecar Video Controllers out there, but I only know of two surviving copies of the P-Code box (one is a prototype and the other is a production box). Mine is the production box, someone else bought the prototype from Mike Dudeck about 10 years ago and I haven't heard anything about where it might be since. Thanks the easiest to find is 32k ram, never seen the others are they prototybes ? Quote Link to comment Share on other sites More sharing options...
Opry99er Posted January 10, 2016 Share Posted January 10, 2016 Got my rig set up for gaming right now... Championship Baseball is simply superb. 9 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 11, 2016 Share Posted January 11, 2016 The sidecar video controllers are a bit of an odd duck. They were produced as standard production items, but they couldn't be sold to home users, as they were classed as industrial devices. Schools and businesses could (and did) buy them, but most of those ended up landfilled after the school/business determined they were no longer needed. The sidecar P-Code boxes were actually available for about two years--but they only became available shortly before the PEB came out, so very few people bought them, as it was more economical to buy the PEB (and took up a lot less space), especially if they hadn't done much to expand their consoles yet. Most folks back then didn't have fully-expanded sidecar systems (maybe one user out of 10 or 20), and considering that there were only about about 60-70 thousand 99/4s on the market then, that probably put the total number of potential sales in the 3-5 thousand range, and that was if everyone bought one (not a likely scenario at all, considering how hard it is to find the PEB version). I figure that realistically, less than 100 of them were probably sold. As I noted earlier, mine is a production version. They remained available in the catalogs right up until TI closed their employee sales stores in late 1984. 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 28, 2016 Share Posted January 28, 2016 Welcome @ home 4 Quote Link to comment Share on other sites More sharing options...
RickyDean Posted January 28, 2016 Share Posted January 28, 2016 Welcome @ home Did you get the software with it? can I have a copy? can you take a picture of the power supply and plug that plugs into the eprommer? I'm trying to find my power supply to mine. Thanks Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 28, 2016 Share Posted January 28, 2016 yes, of course (but I did NOT test the software yet. I assume, it´s the right one) EPROMER-SW-Mechatronik99-HeinerMartin1-ENG-PURE.dsk Maybe you need "TYPE 9655" (110 Volts, same output voltage) 1 Quote Link to comment Share on other sites More sharing options...
Flottmann1 Posted January 29, 2016 Share Posted January 29, 2016 (edited) here Pics from my TI-Epromer 202_180K_40T_DSSD_E_hfe.dsk 203_180K_40T_DSSD_E_hfe.dsk 204_180K_40T_DSSD_E_hfe.dsk Edited January 29, 2016 by Flottmann1 3 Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted January 29, 2016 Share Posted January 29, 2016 here Pics from my TI-Epromer hey hey hey ! this is the same of mine ! i never understand how test this, i haven't the powersupply. so, maybe you can help me 2 Quote Link to comment Share on other sites More sharing options...
RickyDean Posted January 29, 2016 Share Posted January 29, 2016 yes, of course (but I did NOT test the software yet. I assume, it´s the right one) EPROMER-SW-Mechatronik99-HeinerMartin1-ENG-PURE.dsk Maybe you need "TYPE 9655" (110 Volts, same output voltage) Mechatronic-Epromer-RMS--07-220VOLT-RMS.JPG Thanks Schmitzi, I just got my SCSI card to work, now I can try to look for the PS and get my Eprommer functional. 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted February 3, 2016 Share Posted February 3, 2016 Welcome @ home Atronic 32KB Expansion System with PIO If somebody knows about the powersupplies voltage, please let me know. Manual says, it is only needed if other periphal without own powersupply is conneccted, i.e. the SpeechSynthesizer, or "Graphix Ex. Basic"... (?) 4 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted February 3, 2016 Share Posted February 3, 2016 It would be nice if you made a full scan of that manual too, Schmitzi. I have one of these devices, but not the manual. I'll have to check to see if I have the power supply the next time I'm in Germany. 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted February 3, 2016 Share Posted February 3, 2016 sounds good yes, I will scan that 3 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted February 3, 2016 Share Posted February 3, 2016 Schmitzi, I like it! It would be cool to see something similar to this with an SD slot on top. One that emulated the Myarc HFDC in FPGA. Could you imagine one SD card to emulate DSK1 - DSK4 & HD? It would be the perfect replacement for the now discontinued Nano-PEB. To me a case is a MUST. /dream mode off 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted February 6, 2016 Share Posted February 6, 2016 . ...not sure if I already posted that haul 2 Quote Link to comment Share on other sites More sharing options...
LynxHandyCaster Posted February 7, 2016 Share Posted February 7, 2016 My TI 99/4a console (w/Speech Synthesizer) and PEB. Anyone willing to sell a 32k memory expansion card and/or disk drive and controller card for the PEB? Sorry, my Atari 130XE and 1050 floppy drive photobomb end the pic. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.