+chue Posted June 16, 2019 Share Posted June 16, 2019 21 minutes ago, iliketurtles said: This is my TI... along with most of my OTHER systems! Something tells me you also like Nintendo. 1 Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 16, 2019 Share Posted June 16, 2019 (edited) 15 minutes ago, chue said: Something tells me you also like Nintendo. I do! Edited June 16, 2019 by iliketurtles Quote Link to comment Share on other sites More sharing options...
pixelpedant Posted June 16, 2019 Share Posted June 16, 2019 New pics of my setup (a fair bit's changed): Main Console: Further Out: (routing TI 99 video to all displays for the picture was silly, but also trivial, since all video is matrix-switched, and can be routed from and to anywhere - or everywhere - at the touch of a button, on an RS-232 based master control panel I designed - the tiny touch-screen display to the left of the main monitor is actually under normal circumstances my signal routing/processing control interface) The Whole Room: 12 2 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted June 17, 2019 Share Posted June 17, 2019 Impressive! ☝️ Quote Link to comment Share on other sites More sharing options...
globeron Posted June 19, 2019 Share Posted June 19, 2019 https://www.youtube.com/watch?v=Sx9oulyEZXA 1 Quote Link to comment Share on other sites More sharing options...
digdugnate Posted June 20, 2019 Share Posted June 20, 2019 my FG99 has shiny new buttons- i no longer have to use a bamboo skewer to push them on the board. Thanks, Greg! 5 1 Quote Link to comment Share on other sites More sharing options...
Atari_Bill Posted June 26, 2019 Share Posted June 26, 2019 Never built my TI collection to any large degree but always interested in it. Only a few systems and a little over maybe a dozen carts or so. Nothing too rare till now. Found what I thought was a great deal on this. Boxed complete. Guess I’ll be hunting down the associated titles now! 8 Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 26, 2019 Share Posted June 26, 2019 (edited) NICE!!! A list of games that use or require the MBX is right here, in case you didn't know: Games that use but don't need the MBX: Sewermania Superfly Bigfoot Space Bandits Meteor Belt Honey Hunt Games that REQUIRE the MBX I'm Hiding Terry Turtle's Adventure Soundtrack Trolley Character Crayons Championship Baseball Notice that most of the ones that require the MBX are educational... Edited June 26, 2019 by iliketurtles 3 Quote Link to comment Share on other sites More sharing options...
rickneff68 Posted June 27, 2019 Share Posted June 27, 2019 If you're going to own the MBX, you really should get Championship Baseball as it's really one of the better titles. You will need 2 players though. I always thought Bigfoot was fun! Plus, the speech is much better/clearer on the MBX. Plus, the joystick is more comfortable than the TI ones when playing Bigfoot too. Quote Link to comment Share on other sites More sharing options...
Atari_Bill Posted June 27, 2019 Share Posted June 27, 2019 10 minutes ago, rickneff68 said: If you're going to own the MBX, you really should get Championship Baseball as it's really one of the better titles. You will need 2 players though. I always thought Bigfoot was fun! Plus, the speech is much better/clearer on the MBX. Plus, the joystick is more comfortable than the TI ones when playing Bigfoot too. The joystick feels really nice. They did a good job designing that. I’ve heard baseball is the one to have. I’ll probably try to find all if possible. 2 Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 27, 2019 Share Posted June 27, 2019 I agree. The TI has a history of pain sticks... and SUPER pain sticks! 4 2 Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted June 27, 2019 Share Posted June 27, 2019 9 hours ago, iliketurtles said: Character Crayons I never seen this one for MBX, was not a Romox unreleased title? Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 27, 2019 Share Posted June 27, 2019 13 hours ago, iliketurtles said: Character Crayons Wait a minute... I messed up. Sorry! 1 Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted June 27, 2019 Share Posted June 27, 2019 it is not a problem turtle Instead i am happy because this mean that i have not to search suddenly another MBX cart ? 1 Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 27, 2019 Share Posted June 27, 2019 (edited) OK! There was also one more... Starship Pegasus which was never produced but it has been coded. Edited June 27, 2019 by iliketurtles 1 Quote Link to comment Share on other sites More sharing options...
Chefgon Posted June 28, 2019 Share Posted June 28, 2019 I finally found the memory expansion sidecar! Unfortunately I broke my ribbon cable when I was hooking it up so the desk is a little cluttery at the moment, but at the same time it looks great anyway! I'll share again when I get a new ribbon cable and everything is set up the way I like it. 4 Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 28, 2019 Share Posted June 28, 2019 I LOVE IT! If I were ever to do a setup like that, I would use a beige system, pull out a Hex-Bus interface, in which I would attach a Hex-Bus floppy drive/controller, RS232, and a Printer 80. Who could forget about a beige program recorder? And beige TI pain sticks... okay never mind on the sticks. Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted June 28, 2019 Share Posted June 28, 2019 Turtles and I really need to set up a full sidecar train and get a picture of it--I think our dining room table is long enough for the project. . . 5 Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 28, 2019 Share Posted June 28, 2019 7 hours ago, Ksarul said: Turtles and I really need to set up a full sidecar train and get a picture of it--I think our dining room table is long enough for the project. . . We would do a black & silver one with all five of the original sidecars+program recorder & disk drive. And the Thermal Printer. The other one we will do will be beige with the Hex-Bus Interface and all six of the Hex-Bus peripherals, the Printer/Plotter, Disk Drive/Controller, Wafertape drive, RS232, Modem, and the Printer 80. Plus a program recorder, of course. 2 Quote Link to comment Share on other sites More sharing options...
+chue Posted June 28, 2019 Share Posted June 28, 2019 9 hours ago, Ksarul said: Turtles and I really need to set up a full sidecar train and get a picture of it--I think our dining room table is long enough for the project. . . Sweet! So I can finally have my mug!? 3 1 Quote Link to comment Share on other sites More sharing options...
globeron Posted June 29, 2019 Share Posted June 29, 2019 4 hours ago, iliketurtles said: We would do a black & silver one with all five of the original sidecars+program recorder & disk drive. And the Thermal Printer. The other one we will do will be beige with the Hex-Bus Interface and all six of the Hex-Bus peripherals, the Printer/Plotter, Disk Drive/Controller, Wafertape drive, RS232, Modem, and the Printer 80. Plus a program recorder, of course. The beige version is a good idea. Also include Joysticks and Speech Synthesizer. Is there a certain order how to connect them? And maybe take a screenshot of the CRU addresses as well ? Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 29, 2019 Share Posted June 29, 2019 12 hours ago, globeron said: The beige version is a good idea. Also include Joysticks and Speech Synthesizer. Is there a certain order how to connect them? And maybe take a screenshot of the CRU addresses as well ? Can include the joysticks, but no Speech Synthesizer because Ksarul & me only have a case for the beige Speech Synthesizer. Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted June 29, 2019 Share Posted June 29, 2019 Could you adapt the standard PCB of the Silver Speech Synthesizer into the Prototype beige case maybe, or it is completely different? Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted June 29, 2019 Share Posted June 29, 2019 (edited) No because the beige speech synthesizer case is exactly the same shape as the Hex-Bus Interface. Which has a bigger case. 53 minutes ago, ti99iuc said: Could you adapt the standard PCB of the Silver Speech Synthesizer into the Prototype beige case maybe, or it is completely different? Edited June 29, 2019 by iliketurtles Quote Link to comment Share on other sites More sharing options...
globeron Posted June 30, 2019 Share Posted June 30, 2019 15 hours ago, iliketurtles said: No because the beige speech synthesizer case is exactly the same shape as the Hex-Bus Interface. Which has a bigger case. http://www.mainbyte.com/ti99/speech/speech_console.html There are also beige cables, like for the Beige Cassette player/recorder I used to have the beige printer (MX-80 ?) Is this the picture of the backside of the Cardboard box of the beige TI ? (I do not have the box with me, but remember there is a similar picture). The beige monitor and beige PEB never were produced ? (but mantadoc painted one himself) This is the Hex-Bus adapter correct ? 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.