laios Posted January 8, 2014 Share Posted January 8, 2014 I'm realy not sure if I choose the right thread but since BIT90 is a Colecovision ,,, recently got one in a lot with other computers but without psu which looks to be more complicated than I think of (has a DIN plug,perhaps 2 voltages??) if anyone has one of these and can help me with it I'll apreciate a lot. Quote Link to comment Share on other sites More sharing options...
NIAD Posted January 8, 2014 Share Posted January 8, 2014 It uses +12, -5 and +5 voltages. I have the Bit power supply that you need with a DIN power connector but I would also have to sell you my Telegames personal arcade/Dina 2 in 1 since these PS are very rare. 1 Quote Link to comment Share on other sites More sharing options...
digress Posted January 8, 2014 Share Posted January 8, 2014 Yeah, I made a homemade 1 from a colecovision power supply so that is another possibility. Quote Link to comment Share on other sites More sharing options...
laios Posted January 8, 2014 Author Share Posted January 8, 2014 (edited) thanks for your help so if I understood correct, Dina 2 in 1 uses the same psu as bit90 ? If it is so I found the pins of this psu in a forum Yeah, I made a homemade 1 from a colecovision power supply so that is another possibility. any help for make one will apreciate a lot 12v Gnd -5v Gnd 5v are these voltages correct , looking at the back of the computer the female DIN socket ? Edited January 8, 2014 by laios Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.