+Larry Posted February 10, 2014 Share Posted February 10, 2014 Is there some docs that explain how to update SDX on the SIDE2 (and presumably the original SIDE)? The update files that I've seen are XEX files. I have looked here, but have found nothing about updating SDX. IF it works like the IDE+2, then I should be able to boot to the internal SDX then load/execute the XEX update file. But I'd rather hear from someone that knows instead of guessing. Thanks, Larry Quote Link to comment Share on other sites More sharing options...
Roydea6 Posted February 10, 2014 Share Posted February 10, 2014 'fjc' website. Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 10, 2014 Share Posted February 10, 2014 (edited) Is there some docs that explain how to update SDX on the SIDE2 (and presumably the original SIDE)? I have looked here, but have found nothing about updating SDX. I have a working SIDE2 update ATR here, if you can possibly hang on for about a day until I get everything packaged up. I'm working as fast as I can. Evidently people are waiting for this stuff... There's a ROM currently on my website, but no means to actually get it onto the cartridge without a PLCC programmer. This is all about to change. Edited February 10, 2014 by flashjazzcat Quote Link to comment Share on other sites More sharing options...
+Larry Posted February 10, 2014 Author Share Posted February 10, 2014 Sure Jon, that's no problem, but I still need to know how to do it. I don't see any explanation at your web site, so I asked the question. I presumed that folks have used the XEX files in the past... -Larry edit: my mistake -- it is a ROM at your site. The older one that I saw (somewhere) is an ATR. Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 10, 2014 Share Posted February 10, 2014 No problem. Regarding the HOW, just boot the ATR... in a day or two. Quote Link to comment Share on other sites More sharing options...
Aking Posted February 14, 2014 Share Posted February 14, 2014 No problem. Regarding the HOW, just boot the ATR... in a day or two. what about side 2 update for Ultimate 1mb ? Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 14, 2014 Share Posted February 14, 2014 (edited) what about side 2 update for Ultimate 1mb ? You mean the PBI BIOS? That'll be available at the weekend also, as a uflash image and a stand-alone XEX installer. You can also update Ultimate's SDX with uflash, or using an ATR similar to the one for SIDE. Edited February 14, 2014 by flashjazzcat Quote Link to comment Share on other sites More sharing options...
w1k Posted February 14, 2014 Share Posted February 14, 2014 (edited) SIDE II1. use SIDE I flasher2. download SIDE II ROM, put it on blank ATR3. start SIDE I flasher..then replace atr with SIDE II ROM4. and flash.. Edited February 14, 2014 by w1k Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 14, 2014 Share Posted February 14, 2014 SIDE II 1. use SIDE I flasher 2. download SIDE II ROM, put it on blank ATR 3. start SIDE I flasher..then replace atr with SIDE II ROM 4. and flash.. NO. THIS WILL NOT WORK. SIDE1 AND SIDE2 FLASHERS ARE NOT COMPATIBLE. Please wait until the weekend. Quote Link to comment Share on other sites More sharing options...
w1k Posted February 14, 2014 Share Posted February 14, 2014 sure.... its standard method for me Quote Link to comment Share on other sites More sharing options...
flashjazzcat Posted February 14, 2014 Share Posted February 14, 2014 Whatever works for you. But the new ROMs aren't out yet anyway, so I'd recommend Aking waits 24 hours or so until I release them, and thus saves wasted effort. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.