ovalbugmann Posted October 13, 2014 Share Posted October 13, 2014 Two Silly Skunks received - Thanks willyvmm. 1 Quote Link to comment Share on other sites More sharing options...
+Saturn Posted October 15, 2014 Share Posted October 15, 2014 They're all here Quote Link to comment Share on other sites More sharing options...
TXG/MNX Posted October 15, 2014 Share Posted October 15, 2014 Nice got the same amount of sillyskunks :-) next to my other skunks... Quote Link to comment Share on other sites More sharing options...
+Saturn Posted October 15, 2014 Share Posted October 15, 2014 I'll post a 'family photo' of mine soon Quote Link to comment Share on other sites More sharing options...
mickcris Posted October 17, 2014 Share Posted October 17, 2014 (edited) My USB cables finally got here from China so I finished the case mod: idea blatenly stolen from here: http://atariage.com/forums/topic/172069-my-skunkboard-has-a-case-now/ Thanks to willyvmm for the skunk, Guitarman for posting the cart label, busterm for the idea about adding the usb port, and pboland for the great label print! Edited October 17, 2014 by mickcris 2 Quote Link to comment Share on other sites More sharing options...
kill_bill Posted October 17, 2014 Share Posted October 17, 2014 Here's my case mod☺ 1 Quote Link to comment Share on other sites More sharing options...
SuperDork3000 Posted October 19, 2014 Share Posted October 19, 2014 (edited) My USB cables finally got here from China so I finished the case mod: idea blatenly stolen from here: http://atariage.com/forums/topic/172069-my-skunkboard-has-a-case-now/ Thanks to willyvmm for the skunk, Guitarman for posting the cart label, busterm for the idea about adding the usb port, and pboland for the great label print! What did you use to cut the hole on top? I want to do the same thing with a nice clean cut. Edited October 19, 2014 by SuperDork3000 Quote Link to comment Share on other sites More sharing options...
mickcris Posted October 19, 2014 Share Posted October 19, 2014 (edited) What did you use to cut the hole on top? I want to do the same thing with a nice clean cut. I measured out the space and outlined it for the usb. I think it was 6mm by 14mm if i remember correctly. Then drilled 2 6mm holes and then used an exacto knife and file to make it rectangular. Its not perfect, but from a distance, it doesnt look too bad. this is the cable I used: http://www.ebay.com/itm/160680899544 I had to shave down the rubber on the female end so it was flush with the metal part and remove the slotted strain relief part of the connectors, but it fit in there without having to cut/resolder the cables. Shipping was pretty slow though so you may want to get it from another seller if you want that cable. Edited October 19, 2014 by mickcris Quote Link to comment Share on other sites More sharing options...
Seedy1812 Posted October 30, 2014 Share Posted October 30, 2014 Mine arrived in the post this week and all I need to do is get my Jag out of storage ( 300+ miles away ) to play with it Quote Link to comment Share on other sites More sharing options...
MockyLock Posted October 30, 2014 Share Posted October 30, 2014 Hello here ! 'got my Skunkboard, tested the two demos. Cool, everything's working Does anyon know a cheap way to get Jaguar game shells ? These are damn expensive here in France. Thank you ! Quote Link to comment Share on other sites More sharing options...
masematte Posted October 30, 2014 Share Posted October 30, 2014 Looking for a cheap Cybermorph 1 Quote Link to comment Share on other sites More sharing options...
Zerosquare Posted October 30, 2014 Share Posted October 30, 2014 Yeah, the easiest way is to get a worthless game (don't tell me there aren't any -- this is the Jaguar we're talking about ), and recycle the shell. If you really don't want to "destroy" a game, B&C do sell empty shells. Quote Link to comment Share on other sites More sharing options...
MockyLock Posted October 31, 2014 Share Posted October 31, 2014 Thanks Yeah, i already looked after worthless games. But even the cheapest, including shipping costs, is about 20$. I'm not that miserly, but i think it's too much just to rip of the board and keep the shell I'll check for B&C, thnak you ! Quote Link to comment Share on other sites More sharing options...
+Saturn Posted November 2, 2014 Share Posted November 2, 2014 I'll post a 'family photo' of mine soon Here they are: 3x Silly Venture Rev 3s 2x Rev 2s 1x Rev 1 Quote Link to comment Share on other sites More sharing options...
ovalbugmann Posted November 2, 2014 Share Posted November 2, 2014 (edited) Mickcris -that is a very nice case for your Skunk - I like that a lot. Especially the USB-A port on top! and label is very nice! @Sweet family of Skunks picture, Saturn! Edited November 2, 2014 by ovalbugmann 1 Quote Link to comment Share on other sites More sharing options...
Paul Westphal Posted May 28, 2015 Share Posted May 28, 2015 One for Pauly, please. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.