cybermarco Posted April 8, 2014 Share Posted April 8, 2014 Hi, Today I got some cartridges for my 2600, but two of them won't fit my four switch or six switch woody? Are these 2600 cartridges? Quote Link to comment Share on other sites More sharing options...
Dauber Posted April 8, 2014 Share Posted April 8, 2014 Not very familiar with these titles but I'm pretty sure Pac-Kong is a 2600 exclusive. Maybe they're oriented wrong and you have to rotate 'em 180 degrees?? Quote Link to comment Share on other sites More sharing options...
Rybags Posted April 8, 2014 Share Posted April 8, 2014 According to the database, they're 2600 games. To work properly, carts need the fingers that push and open the protective cover on the cart slot. The cart slot also has fingers which do the same on the cartridge although usually only Atari made cartridges ever had them. If the fingers aren't present then you'll probably have to use a small screwdriver or something to open the cover. Quote Link to comment Share on other sites More sharing options...
cybermarco Posted April 8, 2014 Author Share Posted April 8, 2014 Yes they do have the two 'fingers'. It kinda looks like the case is a little to big. I'll try again. They must fit somehow if they are 2600 carts... Quote Link to comment Share on other sites More sharing options...
Albert Posted April 8, 2014 Share Posted April 8, 2014 Can you take a photo of the business end of the carts? Quote Link to comment Share on other sites More sharing options...
+SpiceWare Posted April 8, 2014 Share Posted April 8, 2014 This might help Quote Link to comment Share on other sites More sharing options...
cybermarco Posted April 8, 2014 Author Share Posted April 8, 2014 Well I finally got them in by using some force and jiggling them from left to right (is that english? :-)) They both didn't work though. I opened them up and used contact spray to clean them. Pac Kong works now, but the other one won't. Quote Link to comment Share on other sites More sharing options...
mkiker2089 Posted April 14, 2014 Share Posted April 14, 2014 I've had carts not fit as well in a woodgrain 2600. Some Apollo carts and even a few Red Label carts were snug. The Jr and Sears Arcade 2 don't have the blast shielding around the cart port so the opening is larger, and the snug carts work fine in those. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.