+arcadeshopper Posted November 5, 2014 Share Posted November 5, 2014 Hey... I was the "man in black" who purchased a cart right after your demo in Evanston... I was wondering is the ATMega chip providing the GROM and the 49f040 the ROM? Is it possible to flash another 49f040 chip to use the other multi-game carts posted here? Yes but It's easier to buy the 512k board here: http://www.arcadeshopper.com/wp/?page_id=11#!/PCB-Fetzner-512k-ROM-cartridge-board-bare/p/41732655/category=5051340 And use a 512kb eeprom or flash memory Greg Quote Link to comment Share on other sites More sharing options...
unhuman Posted November 7, 2014 Share Posted November 7, 2014 Pretty sure mine arrived! Haven't opened it yet, but the weekend will be fun! 1 Quote Link to comment Share on other sites More sharing options...
Iwantgames:) Posted November 7, 2014 Share Posted November 7, 2014 Pretty sure mine arrived! Haven't opened it yet, but the weekend will be fun! How can you leave it trapped in that package Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted November 7, 2014 Share Posted November 7, 2014 My stuff just got back from Chicago, sitting at the office waiting for me to pick it up... I could run up there tonight and pick it up and install new RAM in one of my virtual servers... oh, the agony!! 2 Quote Link to comment Share on other sites More sharing options...
firepod Posted November 7, 2014 Share Posted November 7, 2014 My 2.7 has arrived, but I am having a problem with it. Maybe because I don't have my PEB setup yet? I have an Un-modded Ti 99/4a and what happens is the screen goes goofy when I select any option. I am only able to get in to 2.7 extended when pushing the spacebar while booting the TI up. The game screen will not load when pushing the spacebar after the computer turns on it just sits at a blue screen with a 0 or other number at the bottom. Here is a video showing it erroring when I choose a menu item, none of them will work for me sadly. https://www.youtube.com/watch?v=yEvfTCvqFQw&feature=youtu.be My Ti has worked fine with other Cartridges so hoping someone knows why this is happening and what I can do to resolve it:) Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted November 7, 2014 Share Posted November 7, 2014 Anything except the XB portion of the cartridge requires 32K as it loads the programs into the 32K space--it will do crazy things otherwise. . . 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted November 7, 2014 Share Posted November 7, 2014 ... because I don't have my PEB setup yet? ...I am only able to get in to 2.7 extended when pushing the spacebar while booting the TI up. My Ti has worked fine with other Cartridges so hoping someone knows why this is happening and what I can do to resolve it:) You pretty much have it figured out. Without the 32K hooked up, the only thing you'll be able to use is the XB accessed via the spacebar. I bet ya canna wait ta get da old P-Box now, eh? 2 Quote Link to comment Share on other sites More sharing options...
firepod Posted November 7, 2014 Share Posted November 7, 2014 (edited) Anything except the XB portion of the cartridge requires 32K as it loads the programs into the 32K space--it will do crazy things otherwise. . . LOL yeah now I get it thank you and yes I want the PEB hahahah:) I will remove the vid now thanks guys!!!! Edited November 7, 2014 by firepod 1 Quote Link to comment Share on other sites More sharing options...
Buyatari Posted November 8, 2014 Share Posted November 8, 2014 Just got mine this week. Now I need a PEB ! 2 Quote Link to comment Share on other sites More sharing options...
am1933 Posted November 9, 2014 Share Posted November 9, 2014 Just got mine this week. Now I need a PEB ! I have the exact opposite problem Quote Link to comment Share on other sites More sharing options...
unhuman Posted November 10, 2014 Share Posted November 10, 2014 My Extended Basic v2.7 Suite Cartridge is better than yours! I dug out all my stuff this weekend and started playing. My daughter (11) walked in and asked if we could make a game! So, we started. I got my GraphiCV tool out and she drew some images (whence I discovered that colors don't work on the Mac, but do on the PeeCee). Then we started with typing in CALL CHAR's and laying out the field. She's got her characters in place, but nothing moves yet. Pretty amazing stuff when she said, this is too small, I want it to be bigger and then CALL MAGNIFY(4) and she's thrilled. 2 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted November 10, 2014 Share Posted November 10, 2014 Big ups for getting the kid involved and excited about the old gal! 1 Quote Link to comment Share on other sites More sharing options...
wyerd Posted December 1, 2014 Share Posted December 1, 2014 (edited) I've been told by Omega that this is THE cartridge to get to run alongside my shiny new PEB. Where can I order one from? Thanks. Edited December 1, 2014 by wyerd Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted December 1, 2014 Share Posted December 1, 2014 I've been told by Omega that this is THE cartridge to get to run alongside my shiney new PEB. Where can I order one from? Thanks. Send a P.M. to Gazoo, he is the guy that makes them. 1 Quote Link to comment Share on other sites More sharing options...
Iwantgames:) Posted December 1, 2014 Share Posted December 1, 2014 While your at it you may wanna ask him about his 512k multicarts I have all his carts and they are awesome Quote Link to comment Share on other sites More sharing options...
wyerd Posted December 1, 2014 Share Posted December 1, 2014 Sorry for my ignorance, but what's a 512k multicart? Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted December 1, 2014 Share Posted December 1, 2014 Sorry for my ignorance, but what's a 512k multicart? This video is old, but it'll give you some background... https://www.youtube.com/watch?v=7IL5MKk7UbA If you want more information, you can type in "512K Multicart" into the search box in the upper right-hand corner of the main page of the TI Forum. 1 Quote Link to comment Share on other sites More sharing options...
kl99 Posted December 31, 2014 Share Posted December 31, 2014 While using the cartridge in daily life, I found out there is an issue in combination with the Horizon Ramdisk Power Up Routine. It happens only after a fresh power up of my system, not a QUIT reset. The Power Up Routine from my Horizon Ramdisks normally calls the MENU and shows the first GROM Program "EXTENDED BASIC V2.7" in its list under Point C. (You can choose with key G the other GROM Programs on the cartridge.) However pressing C doesn't successfully load Extended Basic. The light for the 32K memory expansions gets turned off and the Disk Drive is not being accessed. The screen turns blank. I have to turn off the console, because there is no way of rescueing the computer. However on the MENU program which comes with ROS 8.14F you can exit MENU (powered up by Horizon) by pressing FCTN+9. Then you normally go back to the Master Titlescreen Screen customized by Bud Mills. However The Extended Basic v2.7 Suite bypasses this title screen and shows it A-Z Menu directly. There you can select A for EXTENDED BASIC V2.7 which then loads fine. 32K flashes up two times, disk drive is accessed for LOAD. Extended Basic is ready to play with. Once you now reset the machine with QUIT, the Horizon MENU comes up again, now for some reason, pressing C works to load Extended Basic V2.7. It would not be such a big issue, if not the same thing would happen with the program BOOT (F18A compatible) where you don't have the option to exit. So if I use BOOT to be autoexecuted during booting, I have no option to go into XB 2.7 and no option to exit and enter the A-Z menu from the Suite. 1 Quote Link to comment Share on other sites More sharing options...
atrax27407 Posted December 31, 2014 Share Posted December 31, 2014 Try pressing and holding SHIFT and ENTER when your system boots. You should get the traditional TI titlle screen. Press any key and the XB2.7 cartridge should appear as a menu option. Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted December 31, 2014 Share Posted December 31, 2014 Try pressing and holding SHIFT and ENTER when your system boots. You should get the traditional TI titlle screen. Press any key and the XB2.7 cartridge should appear as a menu option. I know the spacebar will take you to the main menu screen and give you XB as an option... but nothing else. Quote Link to comment Share on other sites More sharing options...
mmartin Posted December 31, 2014 Share Posted December 31, 2014 have one yet? Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted December 31, 2014 Share Posted December 31, 2014 have one yet? Yes, best cartridge EVER for the TI...IMHO. 1 Quote Link to comment Share on other sites More sharing options...
Iwantgames:) Posted December 31, 2014 Share Posted December 31, 2014 Yes, best cartridge EVER for the TI...IMHO. All of Gazoos carts are the best and should be in every TIers collection 1 Quote Link to comment Share on other sites More sharing options...
Gazoo Posted January 1, 2015 Author Share Posted January 1, 2015 While using the cartridge in daily life, I found out there is an issue in combination with the Horizon Ramdisk Power Up Routine. It happens only after a fresh power up of my system, not a QUIT reset. The Power Up Routine from my Horizon Ramdisks normally calls the MENU and shows the first GROM Program "EXTENDED BASIC V2.7" in its list under Point C. (You can choose with key G the other GROM Programs on the cartridge.) However pressing C doesn't successfully load Extended Basic. The light for the 32K memory expansions gets turned off and the Disk Drive is not being accessed. The screen turns blank. I have to turn off the console, because there is no way of rescueing the computer. However on the MENU program which comes with ROS 8.14F you can exit MENU (powered up by Horizon) by pressing FCTN+9. Then you normally go back to the Master Titlescreen Screen customized by Bud Mills. However The Extended Basic v2.7 Suite bypasses this title screen and shows it A-Z Menu directly. There you can select A for EXTENDED BASIC V2.7 which then loads fine. 32K flashes up two times, disk drive is accessed for LOAD. Extended Basic is ready to play with. Once you now reset the machine with QUIT, the Horizon MENU comes up again, now for some reason, pressing C works to load Extended Basic V2.7. It would not be such a big issue, if not the same thing would happen with the program BOOT (F18A compatible) where you don't have the option to exit. So if I use BOOT to be autoexecuted during booting, I have no option to go into XB 2.7 and no option to exit and enter the A-Z menu from the Suite. You're trying to use 2 autostart devices together, which generally doesn't work very well. If you want to use the XB v2.7 Suite cartridge, turn off the Horizon autostart Menu option. There is an option if you insist on using the Horizon autostart Menu. It involves a bastardization of the XB v2.7 cartridge which I've created at Ksarul's request, but I'm not particularly fond of. Follow-up post to be made soon. Gazoo Quote Link to comment Share on other sites More sharing options...
Gazoo Posted January 1, 2015 Author Share Posted January 1, 2015 There is now a version of the XB v2.7 suite cartridge at Ksarul's request which is non-autostart. No functionality is lost, everything's still there. The REVIEW MODULE LIBRARY function is used instead of the autostart. You'll see the following screens when 3 is selected for REVIEW MODULE LIBRARY: The last screen rolls around to the first one. Selecting the MENU option brings up the normal white on blue autostart menu screen of the cartridge upon which the spacebar selects the game menu. Those preferring another autostart device (Horizon) may prefer this version of the cartridge. I won't be manufacturing any of these other than the one I made for testing, but feel free to make your own. The necessary files are attached to this post. Gazoo XB v2.7 Suite Crippled.zip 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.