quylein Posted October 3, 2014 Share Posted October 3, 2014 What is the best way to mod the audio. I have seen the schematic from the Pokey and a few pictures from resistors on the side. I've yet to see any photos or how to on just the audio side. My main goal is to have the best sound with the least amount of moving parts so to speak. Judging by the pokey end of it I'll need to make a small circuit while the resistor connection can pretty much go to the RCA jack. Any help links or photos of both mods and opinions on which to do would be helpful. Quote Link to comment Share on other sites More sharing options...
quylein Posted October 4, 2014 Author Share Posted October 4, 2014 Not that this is getting much response but I have a new quandary. By the expansion port is pin 2 audio out and 3 is ground. Has anyone soldered a 1uf cap to the positive there and used pin 3 for ground? It seems that it would be cleaner then running from the resistor or pin 37 to RCAs on the expansion port. However I am new to all of this and want to know if it's been done or issues with this idea. Quote Link to comment Share on other sites More sharing options...
quylein Posted October 25, 2014 Author Share Posted October 25, 2014 The answer is yes.. I connected it straight to pin 11 and 12 of Helders snes multiout connection 8 bought. Quote Link to comment Share on other sites More sharing options...
TheRealAnubis Posted November 7, 2014 Share Posted November 7, 2014 Nice work! Quote Link to comment Share on other sites More sharing options...
0078265317 Posted November 7, 2014 Share Posted November 7, 2014 nice Quote Link to comment Share on other sites More sharing options...
quylein Posted January 12, 2015 Author Share Posted January 12, 2015 Just modded a 4 port and went over the schematic. I found that the mod like this won't work unless it's a two port. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.