+madman Posted May 18, 2015 Share Posted May 18, 2015 I would also like a Jag cd unit translucent shell as well when they become available, just let me know. Thanks, look forward to doing the shell swap. Not available and never will be. Quote Link to comment Share on other sites More sharing options...
JagLynx4Life Posted May 19, 2015 Share Posted May 19, 2015 (edited) I'm having a terrible time getting the power button to work and align properly with the power switch. Did anyone just reposition the bottom two (with hot glue) post to it's original location so that you can screw down the two lower silver screws onto the board VS shaving down the two posts? If I recall, some peeps went thus route for the white dental cases. Any tips? I used some duo sided adhesive and still can't get that perfect height, perhaps I'll try adhesive foam like one member mentioned... Edited May 19, 2015 by JagLynx4Life Quote Link to comment Share on other sites More sharing options...
bmx Posted May 19, 2015 Share Posted May 19, 2015 Still waiting, too (germany). Quote Link to comment Share on other sites More sharing options...
onalok Posted May 20, 2015 Share Posted May 20, 2015 Did not realize that it was not available. I am new to atari age and simply seen the first posting. It wasn't until later that I read enough to realize there were 15+ pages of posts. Yes, also new to forums in general, this is one of the first that I have found to be of interest. So my bad, sorry. And as far as the $53 dollars, its really not that big of a deal. If it gets sent back then great, if not, then i'll "chalk it up" to be a dumb-ass fee on my part. Quote Link to comment Share on other sites More sharing options...
Albert Posted May 20, 2015 Share Posted May 20, 2015 Did not realize that it was not available. I am new to atari age and simply seen the first posting. It wasn't until later that I read enough to realize there were 15+ pages of posts. Yes, also new to forums in general, this is one of the first that I have found to be of interest. So my bad, sorry. And as far as the $53 dollars, its really not that big of a deal. If it gets sent back then great, if not, then i'll "chalk it up" to be a dumb-ass fee on my part. I'm sure that if no additional shells are available, you will receive a refund. ..Al Quote Link to comment Share on other sites More sharing options...
onalok Posted May 20, 2015 Share Posted May 20, 2015 I, of course, would prefer the Shells but i'm going by a post made by someone asking "why are people still sending money for an item that is not available?" I hope there is one more Jag and cart shell but if not, I understand. Quote Link to comment Share on other sites More sharing options...
Parrothead Posted May 20, 2015 Author Share Posted May 20, 2015 Hey All, I am shipping all remaining orders this week and will then get a count of left overs. Stay tuned and I will get that info to you all very soon! 2 Quote Link to comment Share on other sites More sharing options...
ArcadeJunkie Posted May 20, 2015 Share Posted May 20, 2015 Leftover console and cart shell for me, if possible.... thank you!!!! Quote Link to comment Share on other sites More sharing options...
Serblander Posted May 21, 2015 Share Posted May 21, 2015 **In my best Eurovision host voice**"Greetings peoples of the world! This is Australia calling!" Super happy to report that I got my International delivery early this morning! Very much looking forward to make my project plans come to fruition (whenever i can carve some non-existent time out that is). In the meantime, here's a pic I just posted on twitter: 4 Quote Link to comment Share on other sites More sharing options...
onalok Posted May 21, 2015 Share Posted May 21, 2015 Just seen an email from mike and mine is being shipped so there must be a few leftovers. Made me happy that I didn't miss out on this. 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted May 21, 2015 Share Posted May 21, 2015 Mine is at the post office. I will collect it tomorrow.(UK) 1 Quote Link to comment Share on other sites More sharing options...
catastropne Posted May 22, 2015 Share Posted May 22, 2015 I just received my tracking info. Money sent March 15th what a wait..... and its almost over! Quote Link to comment Share on other sites More sharing options...
panamajoe Posted May 26, 2015 Share Posted May 26, 2015 still no tracking info for mine... Quote Link to comment Share on other sites More sharing options...
thucom Posted May 26, 2015 Share Posted May 26, 2015 (edited) same here, hopefully I didn't screw it up somehow or get it lost in the mess of orders on the 14th of March. Edited May 26, 2015 by thucom Quote Link to comment Share on other sites More sharing options...
catastropne Posted May 27, 2015 Share Posted May 27, 2015 Well here is mine next to my stock Jag. Now time for some Deathmatch! 4 Quote Link to comment Share on other sites More sharing options...
Jungsi Posted May 27, 2015 Share Posted May 27, 2015 Also no tracking info for me in Germany Quote Link to comment Share on other sites More sharing options...
masematte Posted May 27, 2015 Share Posted May 27, 2015 I got no tracking info, but a info from the costum, so it arrived germany u Quote Link to comment Share on other sites More sharing options...
Guitari Posted May 27, 2015 Share Posted May 27, 2015 Well here is mine next to my stock Jag. Now time for some Deathmatch! I have mine and shall install the board in a few days. Did you relocate the two posts at the front or leave them as they were? Quote Link to comment Share on other sites More sharing options...
catastropne Posted May 28, 2015 Share Posted May 28, 2015 I left them where they stood, and just sanded them down until they were the right height. Quote Link to comment Share on other sites More sharing options...
Guitari Posted May 28, 2015 Share Posted May 28, 2015 I left them where they stood, and just sanded them down until they were the right height. Ah ok, thanks, I'll look at this method. Quote Link to comment Share on other sites More sharing options...
NeoGeoNinja Posted May 28, 2015 Share Posted May 28, 2015 Also no tracking info for me in Germany Quote Link to comment Share on other sites More sharing options...
nicolaspersijn Posted May 28, 2015 Share Posted May 28, 2015 As far as I know, he's using usps for shipping. USPS only offers international tracking for Express, I believe. This would explain why there's no tracking on the international orders. But that's just my guess. Quote Link to comment Share on other sites More sharing options...
masematte Posted May 28, 2015 Share Posted May 28, 2015 Got mine from the customs(germnay) looks great Quote Link to comment Share on other sites More sharing options...
Clint Thompson Posted May 29, 2015 Share Posted May 29, 2015 Still interested in a handful of clear carts... please let me know Mike. Thanks! Quote Link to comment Share on other sites More sharing options...
Guitari Posted May 30, 2015 Share Posted May 30, 2015 (edited) Well I now have the clear setup. Just need the correct screws and rubber feet. Can anyone Point me in the right direction? Or does anyone have spare screws and feet I can buy from them? What I've done is keep the lower part of the sheild in place and sawn off and repositioned the front posts as I did with the dental jag. It works a treat. Also The reason for the bottom shield is to help give a meaningful back to the unit. Cheers Edited May 30, 2015 by Guitari Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.