mozartpc27 Posted October 6, 2015 Author Share Posted October 6, 2015 Don't have a multi-meter, but it's possible one of my friends does. I'll look into it. 1 Quote Link to comment Share on other sites More sharing options...
mozartpc27 Posted January 29, 2016 Author Share Posted January 29, 2016 So I've let this project run dormant for a bit, but I've noticed this item on ebay - a replacement power supply. I have to be a little careful with the cash for a bit, but if there is still one available on February 10th I think I'll pick it up, if folks on here think this has a shot at solving my "dead" drive problem. What do you think? For some reason the forum is not allowing me to paste the link to the ebay item... Quote Link to comment Share on other sites More sharing options...
Yestertech Posted December 18, 2023 Share Posted December 18, 2023 I had a similar problem with a 3029 drive. It was all a matter of connecting the ribbon cable properly. After several variations I found the one that worked: middle connector (B) to the controller and the end connector to the drive, as the 3029 apparently has to be the final drive. If the end connector doesn't work one way turn it upside down. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.