mickcris Posted April 2, 2015 Share Posted April 2, 2015 (edited) Update 1/6/18:output resistor values updated. see here: http://atariage.com/forums/topic/236875-fs-pceturbografx-ths7374-rgb-ampscables-and-pre-amped-consoles/?p=3928529 Prices are for items shipped inside of the USA. Other countries may have additional shipping cost. Payment accepted via paypal. Please do not add a note in paypal mentioning anything about mods or similar terminology.Amp now has a THS7374 (with LPF bypassed) for amplification instead of a THS7314. THS7374 produces a sharper image than the THS7314. Also, most other amps for sale do not account for the non standard output of the PC Engine/TG16 and will have too bight of an output with washed out colors. This amp has proper output resistance and the display device will see it as 75 ohms. The amp comes with a piece of double side tape attached to the bottom.Also available is sync stripper add-on board. Board outputs 75 ohm sync.amp only = $20 shippedamp + connector + euro scart cable = $40 shippedamp + sync strip add-on + connector + euro scart cable + $44 shippedAmp includes 2 4.7uf ceramic caps at no extra charge in case you want to do Viletim's jailbar fix.Available are PCB mount 8 pin DIN (RGB pins pre trimmed and labeled) for consoles like the CoreGrafx, Turbo Duo, etc.. or circular panel mount 8 pin DIN for IFU-30, Tennokoe 2, etc...Panel Mount's data sheet with dimensions: http://www.cui.com/product/resource/sd-xxls-series.pdfmmmonkey has a good guide on how to install the PCB mount jack:http://www.mmmonkey.co.uk/core-grafx-rgb-mod/I can also make the cable JP21 upon request. Also can make an 8 pin mini din cable upon request, but there is not much demand for those so not going to keep any premade after I run out of what I have made already.Here are a few pics of the amp (old style but new one is the same size) installed in a console:new amp installed on a duo________________________________________________________________________________________________________________________________________________Consoles (Prices for consoles are shipped inside the USA). If you need a region switch, one can be installed in any console I am selling for an extra cost.RGB Tennokoe 2 - comes with scart cable.Has had a DIN 8 and AV jacks added to the back. Expansion port has been trimmed so it will also work on a TG16 as well as PC Engine systems. Saving tested and verified working. Have minor scuffs and scratches. All have the battery cover, but one had the clip part of the cover almost broken off so a bit of epoxy was added to it.Asking $75 each shipped in the USA (1 available)a few more picshttp://imgur.com/a/gXcGfSOLD: Edited April 2, 2018 by mickcris 1 Quote Link to comment Share on other sites More sharing options...
mickcris Posted April 5, 2015 Author Share Posted April 5, 2015 price lowered on TG16 1 Quote Link to comment Share on other sites More sharing options...
mickcris Posted April 9, 2015 Author Share Posted April 9, 2015 Still have a bunch of amps and cables ready to go if anyone needs some. Quote Link to comment Share on other sites More sharing options...
mickcris Posted April 11, 2015 Author Share Posted April 11, 2015 Added a PC Engine with RGB mod. Quote Link to comment Share on other sites More sharing options...
mickcris Posted April 14, 2015 Author Share Posted April 14, 2015 Tennokoe 2 added yesterday and prices on systems lowered a little Quote Link to comment Share on other sites More sharing options...
mickcris Posted April 18, 2015 Author Share Posted April 18, 2015 some amps/cables still available 1 Quote Link to comment Share on other sites More sharing options...
mickcris Posted April 21, 2015 Author Share Posted April 21, 2015 added pc engine duo Quote Link to comment Share on other sites More sharing options...
Bratwurst Posted April 21, 2015 Share Posted April 21, 2015 That looks like really nice work you did on the Duo, I appreciate modding that makes use of pre-existing holes and slots, avoiding hacking into the plastic. Quote Link to comment Share on other sites More sharing options...
mickcris Posted April 24, 2015 Author Share Posted April 24, 2015 bump. added CoreGrafx Quote Link to comment Share on other sites More sharing options...
mickcris Posted May 8, 2015 Author Share Posted May 8, 2015 (edited) bump. back from vacation. console still available and plenty of amps/cables ready to ship. Edited May 8, 2015 by mickcris Quote Link to comment Share on other sites More sharing options...
mickcris Posted May 17, 2015 Author Share Posted May 17, 2015 bump. 18 amps assembled and ready to ship. Not sure if i'm going to build anymore after these. Quote Link to comment Share on other sites More sharing options...
mickcris Posted May 22, 2015 Author Share Posted May 22, 2015 bump. added duo-r Quote Link to comment Share on other sites More sharing options...
mickcris Posted June 4, 2015 Author Share Posted June 4, 2015 Bump Quote Link to comment Share on other sites More sharing options...
mickcris Posted June 10, 2015 Author Share Posted June 10, 2015 duo-r still available. Quote Link to comment Share on other sites More sharing options...
mickcris Posted June 17, 2015 Author Share Posted June 17, 2015 bump Quote Link to comment Share on other sites More sharing options...
mickcris Posted June 23, 2015 Author Share Posted June 23, 2015 bump Quote Link to comment Share on other sites More sharing options...
mickcris Posted June 30, 2015 Author Share Posted June 30, 2015 bump Quote Link to comment Share on other sites More sharing options...
mickcris Posted July 7, 2015 Author Share Posted July 7, 2015 bump Quote Link to comment Share on other sites More sharing options...
mickcris Posted August 15, 2015 Author Share Posted August 15, 2015 bump. have lots of cables and amps ready to ship Quote Link to comment Share on other sites More sharing options...
mickcris Posted August 27, 2015 Author Share Posted August 27, 2015 bump Quote Link to comment Share on other sites More sharing options...
mickcris Posted September 3, 2015 Author Share Posted September 3, 2015 bump Quote Link to comment Share on other sites More sharing options...
plx Posted September 11, 2015 Share Posted September 11, 2015 Where do i get the 5V from, for the RGB amp? Quote Link to comment Share on other sites More sharing options...
mickcris Posted September 11, 2015 Author Share Posted September 11, 2015 (edited) replied to your pm, but ill post this here also: duojindance has a couple videos where he does a complete install on a Duo-R. you can get it from where he shows, or anywhere else there is 5v. You can use the output pin on the 7805 to check for continuity if you want to use a different point than what he does. I cant remember exactly where he gets it from. Edited September 11, 2015 by mickcris Quote Link to comment Share on other sites More sharing options...
7800fan Posted September 12, 2015 Share Posted September 12, 2015 As a suggestion, if you use Everdrive and with expansion like Turbobooster Plus or Tennokoe 2, replacing the stock 7805 with one rated for 1.5a or more would go a long way toward preventing glitchy games and crashing. CD system uses multiple regulators and should be OK. Duo is generally OK although the black Duo may not like it if they are still with original caps. 1 Quote Link to comment Share on other sites More sharing options...
mickcris Posted September 23, 2015 Author Share Posted September 23, 2015 bump Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.