daafies Posted July 5, 2015 Share Posted July 5, 2015 hi all, i had/have an issue with my 5200 where after 10-15 mins the screen will start flickering and eventually goes blank. i figured it might be a voltage regulator overheating. so i opened it up and am now the problem does not occur. probably cause it runs cooler without the case. i did notice tho that resistors r57 and r58 run really hot at ~130F. also Q6 at 125F. are these values normal? thanks david Quote Link to comment Share on other sites More sharing options...
atari-dna Posted September 9, 2015 Share Posted September 9, 2015 Q6 certainly sounds warm from your description, Q7 is too I would imagine. Are your resistors at R57, 58 Metal Oxide 330 Ω ? That would be the correct value. What do the outputs of your Voltage regulators read on the multimeter? Quote Link to comment Share on other sites More sharing options...
daafies Posted October 5, 2015 Author Share Posted October 5, 2015 Thanks for reply! Sorry havent looked at the 5200 in a while. Next time i pull it out ill check. Thanks for trying to help! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.