Jump to content
Sign in to follow this  
Beyond Third

Bad TIA/RIOT? Need help!

Recommended Posts

Hello everyone, excuse any informalities, I'm new here. Anyway, recently my Darth Vader 2600 stopped reading games. I've tried multiple AC adapters, multiple RF cords (coax adapter, no switch boxes), multiple TVs and multiple games. I believe the problem may be the TIA or RIOT chip(s). After cleaning cartridges and the cartridge port, I got very garbled video such as this, with barely any input from the games. I tried Donkey Kong, Megamania, and Gorf. Donkey Kong made some weird movements, Megamania gave me a blank screen and Gorf started looking normal but eventually turned into a blue pattern. Here are some screenshots and the board itself. After cleaning the board a bit with rubbing alcohol, everything now shows up blank. It will output a black screen to the selected channel, but if I were to go to the other (i.e. if I had the switch to channel 2 and was on channel 3, and vice-versa), I'd get static and patterns. Any help would be very appreciated!

post-43085-0-31041500-1437456845_thumb.jpg

post-43085-0-46797600-1437456962_thumb.jpg

post-43085-0-17038500-1437456975_thumb.jpg

post-43085-0-91886700-1437456986_thumb.jpg

Edited by Beyond Third

Share this post


Link to post
Share on other sites

It might be the RIOT but I'm doubtful. I had a RIOT go bad on my four switch Woody but it played fine - it merely wouldn't read the difficulty switches. I suppose if the RAM portion of the chip was bad that might explain the weird graphics. The good news is that all the main chips are still available cheap. Personally I'd start with TIA, 6507 and then RIOT.

 

Do you have the Field Service Manual?

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Alright cool, is there anywhere I can get them aside from gutting an old motherboard? I don't have the manual, I'll get that now.

Share this post


Link to post
Share on other sites

The 6532 can be had on ebay and the TIA can be had from Best Electronics.

Share this post


Link to post
Share on other sites

If cleaning made it worse, than it might just as well be a bad solder joint somewhere, which totally lost contact now.

I'd try inspecting the connections and re-flowing anything suspicious.

Edited by Mef

Share this post


Link to post
Share on other sites

Just ordered an "as-is" motherboard and another 6532, might as well stock up. Just sent Best Electronics an email. I looked at the solder joints and they all seem fine, but I'm going to take another look later. For now I'm going through the service manual and seeing if anything helps.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...