Atari 1040 STF Display Options

[gamer2]

I had an Atari ST 1040 STF given to me recently, and after getting RGB Scart cables from Ebay, I found that it is finicky with my RGB equipment, namely my two scalers. The only thing it displays on is my CRT TV through a SCART to Component transcoder, and the image has flutter, and the software I wrote to a disk runs but scrolls (no way to adjust vertical hold on my TV). I do have old VGA monitors, but I know that only displays in Monochrome. Aside from a CRT Display, a PVM/BVM which I can not locate due to me living out in the middle of nowhere, and a sc1224 Atari Monitor...what are my options to display RGB from this machine.

I do have an old Apple 12" RGB Display, the low res (512x384) version from the Macintosh LC which I have in storage. Could I use that?

[Xebec]

Not my video - but this appears to be a reasonably priced solution for outputting color to VGA monitors:

 

 

The board (GBS8200) appears to cost around $25 USD from various sources. If you're willing to do some cable hacks, and can get packages shipped to the middle of nowheres, maybe this will help

 

Good luck!

 

P.S. Does the SC 1224 not work?