Maxitaxi874 Posted December 5, 2015 Share Posted December 5, 2015 I got a 4 switch atari that works perfectly fine but not so much for the rf cable so time for it to go. the atari has little space from the rf port to the top shell so I keep looking around I can't find a cord that will fit. Anyone got any recommendations Quote Link to comment Share on other sites More sharing options...
Nutsy Doodleheimer Posted December 5, 2015 Share Posted December 5, 2015 Try looking at Fry's Electronics, Radio Shack (if none are closed down in your area), or even the electronics section at Wal Mart or Target. They should be no greater than 1/8" in diameter. Quote Link to comment Share on other sites More sharing options...
Keatah Posted December 5, 2015 Share Posted December 5, 2015 One of these 5 solutions will work. 1- find a cable that fits. 2- trim off part of the body and strain relief where the cable itself enters the connector. 3- cut off the connector and solder to the motherboard. 4- get a female connector and solder it to the motherboard at a right angle. 5- force fit it and be done with it. Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.