OSx16 "Jmice Adapter" Device Driver & "Game Commander"

[Atari 2600 H.E.R.O]

"OSx16 Jmice Adapter Device Driver" Installation :

Connect Adapter To Serial Port

Boot System With OSx16 Version 6.22 Beta Release Revision 6.22.02

Type : OSxJmice (Upper/Lower Case Allowed)

To Run "OSx16 Game Commander" :

Type : OSxGC (Upper/Lower Case Allowed)

 

Also;You Can Use Atari CX40 Joystick (And/OR Compatible) In Skyroads, Skyroads (XMAS Special), Wolf3d DOS Games Via "OSx16 Jmice Adapter Device".

 

+ 340 Atari 2600 (Play All With "OSx16 Jmice Adapter" And Atari Joystick, Just Now)

+ 20 DOS

+ 5 NES

+ 2 SEGA

+ 3 C<64

Games.

 

Best Choice For Old and New PCs & Laptops Without HDD, FDD, Sound Card, Huge RAM, ...

For Simulation The Atari 2600, And Using Its Original Joystick.

 

Adapter Picture In :

http://atariage.com/forums/topic/246470-diy-osx16-joystick-mice-adapter-osxjmice/

CD-ROM ISO FILE :

http://1drv.ms/1iE3ci3

 

Edited December 7, 2015 by Atari 2600 H.E.R.O

[Atari 2600 H.E.R.O]

CD-ROM Image Size < 13MB (Zipped Size)

Firmware Size < 1KB (Zipped Size)

[Atari 2600 H.E.R.O]

Dear Atari/Commodore/DOS Games Friends

Due To Some Problems For Obtaining and Burning CD-ROM's,

Bootable Image File For USB Flash Devices,

"OSX16 Version 6.22 Beta Release Revision 6.22.04 (USB).IMG",

is Available, Just Now.

Attention :

Don't Use Any Boot-Flash Burner For Burning Bootable USB Flash Device.

Use Hex File/Drive Editor, Only.

Extract .7z File -> "OSX16 Version 6.22 Beta Release Revision 6.22.04 (USB).IMG"

1) Open File (USB .IMG File)

2) Select All

2) Copy

3) Open Drives

4) Select and Open USB FLASH MEMORY AS PHYSICAL Drive

5) Paste Over

6) Save Changes.

Don't Attempt To Open Drive In Windows (Contents Are Invisible).

Plug USB Flash to USB Port

Restart System and Select Boot Drive -> USB

Good Luck