Bryan Posted January 1, 2016 Author Share Posted January 1, 2016 Uh, just a bit of warning... you aren't going to find a consistent authoritative reference on the NTSC color delay even from Atari. SALT tells you to match 1 and 15 and the PAL GTIA hardcodes that, but the Atari Hardware Manual has 1 and 15 labeled different. Then there are games like EPYX Summer Games that use color 15 for red and will show nasty flags if the color delay isn't set to push 15 beyond 1. There's no way to win with one particular setting. We should probably establish a standard within the community and use it going forward. I used to use the original Pac Man cart because getting all 4 ghosts the right color took careful adjustment. Quote Link to comment Share on other sites More sharing options...
+bob1200xl Posted January 2, 2016 Share Posted January 2, 2016 Well, if we can accurately determine what delay is being set in each GTIA cycle, we can just address a 'color array' to output whatever 'color' we think is appropriate. You could even load the array dynamically to suit your preference. Can you explain how you would set up to see this problem? A looping color change? Bob Quote Link to comment Share on other sites More sharing options...
Bryan Posted January 2, 2016 Author Share Posted January 2, 2016 Well, if we can accurately determine what delay is being set in each GTIA cycle, we can just address a 'color array' to output whatever 'color' we think is appropriate. You could even load the array dynamically to suit your preference. Can you explain how you would set up to see this problem? A looping color change? Bob Something like this: This way you'll see different color delays sliding against each other. -Bry 10 GRAPHICS 7+16 20 FOR X=0 TO 159 STEP 2 30 COLOR 1 40 PLOT X,0:DRAWTO X,95 50 COLOR 2 60 PLOT X+1,0:DRAWTO X+1,95 70 NEXT X 80 POKE 708,30 90 POKE 709,A 100 A=A+1:IF A=256 THEN A=0 110 GOTO 90 1 Quote Link to comment Share on other sites More sharing options...
Bryan Posted January 7, 2016 Author Share Posted January 7, 2016 Rev C boards are here! I'm going to be taking orders for the first batch which will ship the 2nd week of February. I'll be taking these orders until the end of January. You can order a complete unit for $20 + shipping or a board-only unit (no jumpers or connectors for a custom installation) for $17 + shipping. You don't need to pay now, but please honor your reservation. I will get shipping quotes once I have your information. First shots of Rev C, plus a comparison of a colorburst from UAV and a stock XEGS. Please excuse the banding- it's hard to get a good shot of a CRT: 2 Quote Link to comment Share on other sites More sharing options...
+ZuluGula Posted January 7, 2016 Share Posted January 7, 2016 (edited) I will take one board-only unit, do we have to PM you? Edited January 7, 2016 by ZuluGula Quote Link to comment Share on other sites More sharing options...
Bryan Posted January 7, 2016 Author Share Posted January 7, 2016 I will take one board-only unit, do we have to PM you? Nope. Got it! Quote Link to comment Share on other sites More sharing options...
+MacRorie Posted January 7, 2016 Share Posted January 7, 2016 I will take one of each please (full board, one for custom install) Quote Link to comment Share on other sites More sharing options...
kazmat Posted January 7, 2016 Share Posted January 7, 2016 I will take 3 full board. thanks ! Quote Link to comment Share on other sites More sharing options...
vazquezrick Posted January 7, 2016 Share Posted January 7, 2016 I'll take 3 Quote Link to comment Share on other sites More sharing options...
spookt Posted January 7, 2016 Share Posted January 7, 2016 I'll take two complete is you can ship to the UK? Quote Link to comment Share on other sites More sharing options...
+slx Posted January 7, 2016 Share Posted January 7, 2016 I'd be interested in 4 full and one for a 7800 which I presume needs custom, with shipping to Austria. Thanks! Gesendet von meinem iPhone mit Tapatalk Quote Link to comment Share on other sites More sharing options...
JoSch Posted January 7, 2016 Share Posted January 7, 2016 Hi. I will take two of the full board. Quote Link to comment Share on other sites More sharing options...
dakidski Posted January 7, 2016 Share Posted January 7, 2016 I'll take 1 full unit for my PAL 600XL. (Denmark, Europe) Quote Link to comment Share on other sites More sharing options...
Smokeless Joe Posted January 7, 2016 Share Posted January 7, 2016 Two complete units, please. Thanks for making this! Quote Link to comment Share on other sites More sharing options...
gozar Posted January 7, 2016 Share Posted January 7, 2016 Two full, one kit, US. Quote Link to comment Share on other sites More sharing options...
AtariBuff Posted January 7, 2016 Share Posted January 7, 2016 Three full shipped to Austria, please. Quote Link to comment Share on other sites More sharing options...
MrMartian Posted January 7, 2016 Share Posted January 7, 2016 Two full kits, please Quote Link to comment Share on other sites More sharing options...
Ransom Posted January 7, 2016 Share Posted January 7, 2016 I would like 2 full kits. They are for the following (NTSC): 5200 (2-port) 1200XL Quote Link to comment Share on other sites More sharing options...
+mytek Posted January 7, 2016 Share Posted January 7, 2016 I would like 1 full unit for XEGS NTSC. Thank you, Michael Quote Link to comment Share on other sites More sharing options...
+Stephen Posted January 7, 2016 Share Posted January 7, 2016 I would like 6 units without connectors. They'll be going in: 2600 7800 800 (Incognito) 1200XL 2 130XEs (one PAL, one NTSC) Quote Link to comment Share on other sites More sharing options...
Prestone Posted January 7, 2016 Share Posted January 7, 2016 (edited) I need 1 full board for 130XE (NTSC?), shipping to US. What's the expected payment method? Edited January 7, 2016 by Prestone Quote Link to comment Share on other sites More sharing options...
+bob1200xl Posted January 7, 2016 Share Posted January 7, 2016 Looks nice! Two full boards and one blank - for 1200XLs. Bob Quote Link to comment Share on other sites More sharing options...
8bitbill Posted January 7, 2016 Share Posted January 7, 2016 I would like to request just one complete kit for a 4-port 5200 (NTSC). Thank you. Quote Link to comment Share on other sites More sharing options...
HoH Posted January 7, 2016 Share Posted January 7, 2016 Hi, one full board please. Thanks. 1 Quote Link to comment Share on other sites More sharing options...
+SoulBuster Posted January 7, 2016 Share Posted January 7, 2016 I'll Take 4 complete Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.