Osgeld #1 Posted December 31, 2015 (edited) 0 LEFT These are aftermarket reproduction NES game pads with the insides taken out and replaced with Atari 2600 and 7800 compatible controller inputs. Independent control of rapid fire is set via the start and select buttons in one of 4 states Single shot 2 shots per second 3 shots per second 4 shots per second Dual color LED indicates each buttons state upon selection, SELECT button toggles modes for button B, START button toggle modes for button A Button B is mapped to the left button on an Atari 7800 and A is mapped to the right button on Atari 7800. When played with an Atari 2600 game or console, both buttons are mapped to the signal fire button, but remain independent in rapid fire modes, so you could have one button single shot and another set as rapid fire. COMPATIBILITY Tested on A2600 and A7800 only no guarantees these will work on other systems like COLECO!!! Every controller is brand new, features a 5.5 foot (1.6 meter) cord, and price includes postage to the Continental United States. Due to the limited quantity, orders are limited to 2 per customer. One Controller for 20$ mailed in the COUSA Two Controllers for 38 mailed in the COUSA THIS IS NOT A PREORDER, BUT QUANTITIES ARE LIMITED A second batch will be made once these sell out, but it will take at least a month before I can restock Edited April 20, 2016 by Osgeld 10 Quote Share this post Link to post Share on other sites
toiletunes #2 Posted December 31, 2015 PM incoming! Quote Share this post Link to post Share on other sites
+GoldenWheels #3 Posted December 31, 2015 PM on the way! Quote Share this post Link to post Share on other sites
cjameslv #4 Posted December 31, 2015 Very cool! Do you have any pics of the leds lit? Quote Share this post Link to post Share on other sites
Osgeld #5 Posted December 31, 2015 No there is only one led and it only blinks when you switch modes It's not neon flashing blinged out heh Quote Share this post Link to post Share on other sites
Gandor #6 Posted January 1, 2016 PM sent for 2 Quote Share this post Link to post Share on other sites
+-^CrossBow^- #7 Posted January 1, 2016 Payment sent for two. Thanks! Quote Share this post Link to post Share on other sites
mmervine #8 Posted January 1, 2016 Just sent payment...looking forward to getting this controller! Quote Share this post Link to post Share on other sites
cjameslv #10 Posted January 2, 2016 Grats on selling out so fast! Quote Share this post Link to post Share on other sites
stupus #11 Posted January 2, 2016 In for 2 still when you get more made! Quote Share this post Link to post Share on other sites
+orpheuswaking #12 Posted January 3, 2016 damn I missed this run Quote Share this post Link to post Share on other sites
mmervine #13 Posted January 4, 2016 Mine arrived today and works great...thanks! Quote Share this post Link to post Share on other sites
+-^CrossBow^- #14 Posted January 5, 2016 I too just received mine today. I haven't tested them out yet, but did notice that the A button on one of mine sticks in the down position occasionally when pressed. These seem clicky so they must use actual switches instead of the carbon pads as original NES controllers usually do. For those that didn't know, these appear to be RetroUSB NES controllers that have been modified for use on the 7800. They aren't actual NES controllers. This is in good in the sense that no actual NES controllers are being sacrificed in the making of these and I'm very OKAY with that! I will fire up the 7800 here in a bit and test these out in more detail, but thanks again Osgeld! Quote Share this post Link to post Share on other sites
Osgeld #15 Posted January 5, 2016 no they are rubber and carbon pads, just new as far as the A button being sticky give it a few cycles, I tried my best to keep stuff from getting in to them but it might have become jostled in the mail Quote Share this post Link to post Share on other sites
+-^CrossBow^- #16 Posted January 5, 2016 Yeah...it was actually the B button on one of them and after a few rounds of Zaxxon on the XE it was fine. Also I'm just not used to using cross pad controllers like this on these games, but they are super sensitive! These will require a break in period until they actually start to feel right! Looks better with the 130XE though... 2 Quote Share this post Link to post Share on other sites
stupus #17 Posted January 5, 2016 -^Cro§Bow^-, on 04 Jan 2016 - 9:55 PM, said: Yeah...it was actually the B button on one of them and after a few rounds of Zaxxon on the XE it was fine. Also I'm just not used to using cross pad controllers like this on these games, but they are super sensitive! These will require a break in period until they actually start to feel right! Looks better with the 130XE though... Quote Share this post Link to post Share on other sites
+GoldenWheels #18 Posted January 5, 2016 Got mine...sadly the turbos are too slow for me even on the fastest setting (Joust requires MUCH more for instant lift!) but the controllers control and play well, and the price was great. I also really like the somewhat clicky nature of the controllers. Gonna slap some Atari logos on them and call it a day! 1 Quote Share this post Link to post Share on other sites
Osgeld #19 Posted February 18, 2016 Batch #2 is coming soon! due to back-orders from last batch im looking at 15 available up for grabs Quote Share this post Link to post Share on other sites
stupus #20 Posted February 18, 2016 Down for 2 Quote Share this post Link to post Share on other sites
Osgeld #23 Posted April 8, 2016 going fast PM today! Quote Share this post Link to post Share on other sites
IMPXANDER #24 Posted April 11, 2016 I would like to purchase two controllers, please. Quote Share this post Link to post Share on other sites
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord