+Schmitzi Posted January 12, 2016 Share Posted January 12, 2016 (NOT-F18A) 80col+EGA-stuff TMS9938 TMS9958 EGA PROGRAMs Geneve Dijit Mechatronik TIM SNUG EDIT Hi all, in contrast to Omega´s thread F18A - 80 Column & Enhanced Graphics Supported Programs here you can find all other software/programs which use or support graphic features i.e. for the TMS9938, TMS9958, Geneve, TIM, Mechatronik 80, Dijit AV-PC, SNUG EVPC a.s.o. (what did I miss ?) If you know about more hard- or software, supporting these or any feature like that, please write down here. thanks, have fun xXx 2 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 12, 2016 Author Share Posted January 12, 2016 mine #1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 12, 2016 Author Share Posted January 12, 2016 . One more for the wide road HARD MASTER by Colin Christensen / Asgard Software ---> 80 columns Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 12, 2016 Author Share Posted January 12, 2016 . while we´re at it Asgard Software´s "Invoice Management 80col version" by Larry Tippett 1992 this I don´t have ... hint hint (was there a 40col-version too? ) Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 13, 2016 Author Share Posted January 13, 2016 . ♫ neverending stoooory ♫♪ Asgard Software´s "Mail Room 99/40 and 99/80" by Larry Tippett 1991 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 13, 2016 Author Share Posted January 13, 2016 . ...and we have "EXB80 - 80 Kolommen in Extended Basic v1.0" from Tonny Brouwer, Netherlands, 1992 seems to be some nice extensions vial CALL-commands. have to check that if my Mechatroni80 is running I pulled the doc from Globeron´s DSK-File, and made a PDF from that If anybody wants to have the english version, pls let me know, I can make it Manual: 0333-80-KOL-1-80-col-EXB-Tonny-Brouwer.pdf Proggy: 0333-80-KOL-1.DSK Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 13, 2016 Author Share Posted January 13, 2016 . Hi, maybe somebody knows about AmeriSoft-Products ? I have a beta-list to be checked, any info welcome http://atariage.com/...ists/?p=3414042 Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted January 13, 2016 Share Posted January 13, 2016 A few that come to mind right away : Geneve or TI: 80 column Infocom Interpreter 80 column Disk Utilities (HFDC) by John Birdwell FunnelWeb Super Mass Transfer Mass Transfer 80 column Telco YAPP Geneve Only: Geneve OS Infocom Interpreter Directory Manager (Clint Pulley) EDIT (Peter Muys) PORT terminal emulator (color) CYA Config Your Autoexec Diskassembler (Tom Freeman) Advanced BASIC (Myarc) Gentri terminal emulator CFORM (color) (There are quite a few command line programs too) 1 Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 13, 2016 Share Posted January 13, 2016 QDE (Quick and Dirty Editor) 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 13, 2016 Author Share Posted January 13, 2016 . *Perfect, input for me I will enter them tomorrow, also have to revise the list for all of that now. thanks Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 13, 2016 Share Posted January 13, 2016 Geneve (maybe also for TI with 80col card?) - MY-Word (J. Peter Hoddie (? think I saw his name somewhere in the code)) - MY-Art (David Klotzkin) Geneve - Fractals! (from me :-) ) 1 Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 13, 2016 Share Posted January 13, 2016 There is also the 80-column Fractal program from Roland Meier. . . 1 Quote Link to comment Share on other sites More sharing options...
atrax27407 Posted January 13, 2016 Share Posted January 13, 2016 80-column F'web works on both the v9938 and v9958 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 14, 2016 Author Share Posted January 14, 2016 . *Perfect, input for me I will enter them tomorrow, also have to revise the list for all of that now. thanks "tomorrow" - was too much action today, thanks for all your infos. I think I have a good idea how to differ all of that, for easily making this lists. And if you remember more, please post post post xXx Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 16, 2016 Author Share Posted January 16, 2016 uih, I think I have entered it all Here just a summary, before I make all the new lists. Any ideas ? thx Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 any thoughts on that ? (Otherwise I´ll just start some lists to see....) Quote Link to comment Share on other sites More sharing options...
+InsaneMultitasker Posted January 19, 2016 Share Posted January 19, 2016 uih, I think I have entered it all Here just a summary, before I make all the new lists. Any ideas ? thx Is this list for 80 column programs or any program that uses -any- feature of the chips? a GIF viewer does not use 80 column mode TMS9938-G for Geneve only? TMS9918-80, how is this different from F18A Required 80 columns? What about 9958 used in some EVPC or similar cards? 1 Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 19, 2016 Share Posted January 19, 2016 The 9938 is not a TMS chip, it is called v9938 or V9938. 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 Thanks for this infos, and ANY input given will be corrected or "pushed" into the XLS pls allow some time to get that right. I will klick "like" every time if entered a post´s content into XLS, or posted something for revision maybe (so, if you see something here on AA that I´ve "liked", be sure it is in my file-repository or in the XLS) (or I just like it) Be assured, if you like my posts, this will be the reaction in my face: Today, I dowloaded all the software from errorfree.de-page, and converted the ARKs to DSKs, and made PDFs from inside DOCs. I have to ask for permission to post, I think ? BUT, here are some more 80col-proggies I found Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 The 9938 is not a TMS chip, it is called v9938 or V9938. changed thx Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 Is this list for 80 column programs or any program that uses -any- feature of the chips? a GIF viewer does not use 80 column mode -> is for 80 col only TMS9938-G for Geneve only? -> changed TMS9918-80, how is this different from F18A Required 80 columns? -> I have some 80cols in the list, for 9918. Maybe wrong... pls look below What about 9958 used in some EVPC or similar cards? -> Added (see below) Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 "Below" = pending Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 . OK, I am getting mad so here the latest updates for today. Not all lists/filters here below make sense for the users, but at the moment, for correction maybe: These are the new filters, sorted from the lowest config (9918) to the higest (F18A): TMS9918-EGA (standard TI, enhancing Graphics in any way): TMS9918/V9938-80-Column (NO F18A): V9938 all HW/SW: GENEVE only: F18A generally supported: F18A 80-Columns-APPs: F18A REQUIRED: Super Mario Bros V9958: + FunnelWeb uih Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 please wait found some errors Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 19, 2016 Author Share Posted January 19, 2016 . Ok, I am on a good way now, but need a break from that 1 Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.