Fushek #1 Posted January 22, 2016 Apologies ... I don't often enter the Colecovision forums and now I'm asking for help pricing something. Hate being THAT guy but if anyone has advice on price, I'd appreciate. I have a Colecovision Expansion Module 3 complete with the printer, computer unit, keyboard, plastic tray that holds the unit and a Colecovision together and the plastic tray for the controller (I think). Hooked it up to my Colecovision and was able to power it up and test the keyboard using the Adam Typewriter function. Unable to test the cartridge bay as I don't have a Colecovision cassette tape. Cartidge bay looks good (to my untrained eye). Definitely has yellowing but otherwise seems ok. Any ideas what I should ask for this thing? Any way to test the cassette tape deck without a Colecovision tape? Quote Share this post Link to post Share on other sites
R.Cade #2 Posted January 22, 2016 I don't have a great answer for you. I had trouble even giving mine away - most don't find it even worth shipping costs. Maybe you will have more luck... Quote Share this post Link to post Share on other sites
fiddlepaddle #3 Posted January 22, 2016 It was hard enough getting people to buy them when they were sold with warranty. Give it a couple more decades... Quote Share this post Link to post Share on other sites
NIAD #4 Posted January 22, 2016 The EM3 isn't as desired as the Stand Alone Adam with built-in ColecoVision unfortunately. If the system was completely tested and working, then you could reasonably ask for around $100, but since you can't test the Data Drive (that's a big one with these), you're looking at about $50. With the shipping costs of these, it's a hard sell even if the system is working 100%. 1 Quote Share this post Link to post Share on other sites
Fushek #5 Posted January 22, 2016 Thanks for the info guys. Since it seems that interest may be low, I'll just throw it onto eBay with a $30 starting bid + shipping and see what happens. Not looking to get rich, just want it out of my house! Thanks again! Quote Share this post Link to post Share on other sites
The Evener #6 Posted January 23, 2016 (edited) It's really worth testing with a cartridge and a data pack, if only to say "tested and working" in your listing. I think you may get less interest if you go untested. Where do you live? I could send you a Donkey Kong to try plus a data pack Edit: sigh, it pays to remember what was said two posts earlier - it's Expansion Module 3 - sorry about that, carry on Edited January 23, 2016 by Colecomeister Quote Share this post Link to post Share on other sites
The Evener #7 Posted January 23, 2016 Double edit -- you DO have a ColecoVision to use! Note to self: avoid using my iPhone when reading certain threads. If you haven't listed the module on eBay yet, PM me your address and I can mail you a datapack copy of ADAMLink or something to test on your computer. Quote Share this post Link to post Share on other sites
ValkerieSilk #8 Posted January 25, 2016 The EM3 isn't as desired as the Stand Alone Adam with built-in ColecoVision unfortunately. If the system was completely tested and working, then you could reasonably ask for around $100, but since you can't test the Data Drive (that's a big one with these), you're looking at about $50. With the shipping costs of these, it's a hard sell even if the system is working 100%. I prefer the EM3, as that's what the kid in me wanted back in the day... There was always something (and still is) magical about that expansion slot ... But I guess wishing for new hardware for the colecovision 30 plus years later has about as much a chance as getting new X-Files episodes ... Or Do Dreams Come True... https://www.youtube.com/watch?v=vxC23OjOPgY https://www.youtube.com/watch?v=_1SmJUBT5q0 Quote Share this post Link to post Share on other sites
Greg2600 #9 Posted January 25, 2016 Forced to keep the printer around in order for this to operate makes it very undesirable. Quote Share this post Link to post Share on other sites
ValkerieSilk #10 Posted January 25, 2016 Forced to keep the printer around in order for this to operate makes it very undesirable. Nah, you just need to contact Rey (http://atariage.com/forums/user/38875-rey/) and grab an awesome PS... 1 Quote Share this post Link to post Share on other sites
The Evener #11 Posted January 26, 2016 Nah, you just need to contact Rey (http://atariage.com/forums/user/38875-rey/) and grab an awesome PS... Holy crap, that is awesome! I clearly have a lot of reading/catching up to do... 1 Quote Share this post Link to post Share on other sites
Fushek #12 Posted January 28, 2016 Thanks again for all the info! Just an FYI, I was able to sell it all for $100 + shipping on eBay with the cassette bay untested. 3 Quote Share this post Link to post Share on other sites
The Evener #13 Posted January 28, 2016 Thanks again for all the info! Just an FYI, I was able to sell it all for $100 + shipping on eBay with the cassette bay untested. Nice!! Quote Share this post Link to post Share on other sites
NIAD #14 Posted January 28, 2016 Thanks again for all the info! Just an FYI, I was able to sell it all for $100 + shipping on eBay with the cassette bay untested. Congrats on finding a buyer and getting a very good price for it considering it wasn't completely tested. Just goes to show, you never know unless you try! Quote Share this post Link to post Share on other sites
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord