Jump to content
Sign in to follow this  
morelenmir

Daisy-chaining the SIO2SD

Recommended Posts

Is it possible for the SIO2SD to sit mid way in a daisy-chain of devices? Obviously one would need to modify it somewhat as mine has just one screw-down header on the main circuit board. I also only have the bare version so do not know if Lotharek's cased units come with two SIO sockets or just one. Presumably it would not be as simple as just wiring a socket in parallel to the connector?

 

A second, unrelated (except in the general sense of modding the bare device) question; the SIO2SD website mentions that the hardware can support a wider display with I think 40 characters. Can anyone point out a part number or eBay auction for a compliant LCD unit?

Share this post


Link to post
Share on other sites

It can but I see no reason not to just have it at the end unless you have problems with high speed that way.

 

Fairly sure the homebuilt plans for SIO2PC include a "decoupling capacitor", no idea if SIO2SD has or needs one.

  • Like 1

Share this post


Link to post
Share on other sites

It really doesn't matter where each device is connected in the chain. Obviously, some devices have no pass through connector and must be located at the end of the chain. This is only a matter of where you physically have an open socket.

 

There are multi-port SIO connector boxes, and you can build your own. Simply connect all SIO pins together on a few SIO sockets. Any SIO device (using a 1050 as an example), that has two connectors has them wired together. No active components required.

 

Without going into too much (probably boring to most) detail, SIO has a command line, unlike its direct descendant USB, which allows everything to be connected together without the need for a hub or similar device. For more info, ask Joe Decuir and look here: https://en.wikipedia.org/wiki/Atari_SIO

and here: http://spiflash.org/atari/siospecs.pdf

  • Like 2

Share this post


Link to post
Share on other sites

Another option which some take is putting it inside the actual computer though that then limits it's use to one machine.

 

Or you could put it inside a peripheral, even powering it locally as well.

  • Like 1

Share this post


Link to post
Share on other sites

I would quite like to have it and an SIO2PC-USB connected, using the latter with the 'SIO2BSD' application on a Debian machine to provide an R/W 'harddrive' folder via the 'PCLink' software. Or at least I can see that as a useful combination if one is running the A8 without mods like Ultimate1MB and SIDE2.

Share this post


Link to post
Share on other sites

No problem here connecting the older SIO2SD boards anywhere at all in the chain, simply by wiring another male SIO connector to the IO header as a pass-thru. Extremely useful if you wish SIO2PC, for example, to be the last in the chain, although that's incorporated in a couple of the newer SIO2SDs.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...