Trew Posted February 18, 2016 Share Posted February 18, 2016 Anyone got the design chops to design an 3D printed display stand for the Lynx (either/both models). Something like this: Or a simplified version of Rygar's here (Maybe just the stand part and the plate): http://atariage.com/forums/topic/124282-do-it-yourself/ But I thought about using the Atari logo as the back plate and maybe the Lynx logo at the bottom/front? Basically, I have a 3D printer but no time/skills. Would happily print off a few for whoever was cool enough to come up with one (or any other form of fair payment). Whaddya say team AA? 1 Quote Link to comment Share on other sites More sharing options...
+karri Posted February 18, 2016 Share Posted February 18, 2016 A nice idea. Perhaps the Fuji back could have a hole to allow the Lynx to be hung on the wall? I could kick up Blender tomorrow and see what I can produce. 2 Quote Link to comment Share on other sites More sharing options...
sirlynxalot Posted February 18, 2016 Share Posted February 18, 2016 (edited) In case you or someone else reading this thread are at all interested in just buying something premade rather than doing the custom route, I have found that china/dinner plate display stands work pretty well for the lynx (particularly the lynx 1). They come in a variety of shapes and materials. Here is one holding up my lynx 1. Edited February 18, 2016 by sirlynxalot 3 Quote Link to comment Share on other sites More sharing options...
7800fan Posted February 19, 2016 Share Posted February 19, 2016 If you have hot air gun or reflow station, you can just get plexi sheet and heat form it into a stand. Check with the data on optimal heat setting or you may end up with warped or bubbled plexi. 1 Quote Link to comment Share on other sites More sharing options...
Guitari Posted February 20, 2016 Share Posted February 20, 2016 I'd be up for a buying couple of these atari logoed stands. Quote Link to comment Share on other sites More sharing options...
Trew Posted March 3, 2016 Author Share Posted March 3, 2016 Been tinkering with designs today (never designed anything for 3D printing before). Here's where I am at so far. The base of the print came out bad, but you get the idea. This works for the Lynx I quite well. The Lynx II not so much as it's a lot fatter, so sorta perches on top of the Lynx logo, and isn't very steady. So I'm making another version with a longer plate to accommodate. Will add more photos when I get a better print/print the new one. 11 Quote Link to comment Share on other sites More sharing options...
Guitari Posted March 3, 2016 Share Posted March 3, 2016 Man that is sweet! Put me on the list! Quote Link to comment Share on other sites More sharing options...
nathanallan Posted March 4, 2016 Share Posted March 4, 2016 Very nice stand, Trew!!! Now I want to cook one up. Quote Link to comment Share on other sites More sharing options...
Serblander Posted March 4, 2016 Share Posted March 4, 2016 I cannot stress enough just how f*^%«#g AWESOME this looks!!! 1 Quote Link to comment Share on other sites More sharing options...
+karri Posted March 4, 2016 Share Posted March 4, 2016 It turned out very nice. I was doing the Fuji symbol in a bit different way. The idea was to start the three bands already from the LYNX logo and have 3 bands go under the LYNX. Then twist the right and left band to form a 3-dimensional Fuji symbol that would be narrower at the top. The middle band would bend backward to allow the design to hang from a screw in the wall. But unfortunately I am still stuck with modeling it in Blender Nice to see that your design works. 1 Quote Link to comment Share on other sites More sharing options...
BadPricey Posted March 4, 2016 Share Posted March 4, 2016 That's really nice Trew. I love the design of it. Congrats ? Quote Link to comment Share on other sites More sharing options...
nathanallan Posted March 4, 2016 Share Posted March 4, 2016 It turned out very nice. I was doing the Fuji symbol in a bit different way. The idea was to start the three bands already from the LYNX logo and have 3 bands go under the LYNX. Then twist the right and left band to form a 3-dimensional Fuji symbol that would be narrower at the top. The middle band would bend backward to allow the design to hang from a screw in the wall. But unfortunately I am still stuck with modeling it in Blender Nice to see that your design works. I can do that! Not in Blender, Blender is a thing of cad-work nightmares. Gimme a minute, STL soon... Quote Link to comment Share on other sites More sharing options...
nathanallan Posted March 4, 2016 Share Posted March 4, 2016 (edited) http://www.thingiverse.com/thing:1391813 Like that? Feel free to use this Edited March 4, 2016 by nathanallan Quote Link to comment Share on other sites More sharing options...
ausretrogamer Posted March 8, 2016 Share Posted March 8, 2016 Whoa! Simply friggin awesome! Quote Link to comment Share on other sites More sharing options...
bmx Posted March 8, 2016 Share Posted March 8, 2016 (edited) Looks really nice. If you ever plan to sell the final designed product, I would def. buy some. Edited March 8, 2016 by bmx Quote Link to comment Share on other sites More sharing options...
cowdog360 Posted March 10, 2016 Share Posted March 10, 2016 Been tinkering with designs today (never designed anything for 3D printing before). Here's where I am at so far. The base of the print came out bad, but you get the idea. This works for the Lynx I quite well. The Lynx II not so much as it's a lot fatter, so sorta perches on top of the Lynx logo, and isn't very steady. So I'm making another version with a longer plate to accommodate. Will add more photos when I get a better print/print the new one. Nice stand. That Lynx I looks familiar Quote Link to comment Share on other sites More sharing options...
+karri Posted March 10, 2016 Share Posted March 10, 2016 This is what I had in mind. Kind of. Quote Link to comment Share on other sites More sharing options...
+karri Posted March 10, 2016 Share Posted March 10, 2016 This is what I had in mind. Kind of. 5 Quote Link to comment Share on other sites More sharing options...
Guitari Posted April 19, 2016 Share Posted April 19, 2016 I wonder if it's plausible to create a small plastic case for lynx carts that snaps shut with a thin plastic hinge just like the game boy and game gear ones, on a 3d printer. Quote Link to comment Share on other sites More sharing options...
7800fan Posted April 20, 2016 Share Posted April 20, 2016 Probably cheaper to buy GB case clones off eBay or Ali than to 3D print cases. Last year I picked up 50 for something like $20 shipped Quote Link to comment Share on other sites More sharing options...
Guitari Posted April 20, 2016 Share Posted April 20, 2016 Yes obviously! But I'm talking about a dedicated case with a lynx logo and an exact fit as though the lynx was released with it's own cart case. Quote Link to comment Share on other sites More sharing options...
nathanallan Posted April 20, 2016 Share Posted April 20, 2016 The Lynx game case is a good idea, but not as a 3D printed part *directly* but 3D print a mold and make them out of something else, like HDPE (I print in ABS, high temp, and it's good for molding HDPE which is lower temp). I'll make this an idea to make in reality when I get everything back going again. Good idea!! I wonder if it's plausible to create a small plastic case for lynx carts that snaps shut with a thin plastic hinge just like the game boy and game gear ones, on a 3d printer. 2 Quote Link to comment Share on other sites More sharing options...
Guitari Posted April 20, 2016 Share Posted April 20, 2016 The Lynx game case is a good idea, but not as a 3D printed part *directly* but 3D print a mold and make them out of something else, like HDPE (I print in ABS, high temp, and it's good for molding HDPE which is lower temp). I'll make this an idea to make in reality when I get everything back going again. Good idea!! Nice one! This too sounds amazing. I really hope it can be done! Quote Link to comment Share on other sites More sharing options...
walter_J64bit Posted April 21, 2016 Share Posted April 21, 2016 Say I could use something like that for my CDX. Nice work! Quote Link to comment Share on other sites More sharing options...
towmater Posted April 21, 2016 Share Posted April 21, 2016 In case you or someone else reading this thread are at all interested in just buying something premade rather than doing the custom route, I have found that china/dinner plate display stands work pretty well for the lynx (particularly the lynx 1). They come in a variety of shapes and materials. Here is one holding up my lynx 1. I'd put some rubber bumpers on those, the acrylic is sooner or later going to leave a mark on the bezel. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.