ScottyDont00 Posted July 9, 2016 Share Posted July 9, 2016 I make every effort to not purchase from him unless I get a few items from the same system for 99 cents when he finally lets things go to auction and make him lose money since he offers his silly shipping discount. He buys up every rare/semi-rare game from systems and at least doubles the price when he lists them. A few months ago he won a CIB Atlantis for the Odyssey 2 that I had bid on and less then a week later he had it listed for $200 more then he paid. He buys games under a different eBay id. 1 Quote Link to comment Share on other sites More sharing options...
djsheep Posted July 10, 2016 Share Posted July 10, 2016 Please add me to the list, 1 unit with the shell. Thank you. 1 Quote Link to comment Share on other sites More sharing options...
Andromeda Stardust Posted July 10, 2016 Share Posted July 10, 2016 I make every effort to not purchase from him unless I get a few items from the same system for 99 cents when he finally lets things go to auction and make him lose money since he offers his silly shipping discount. He buys up every rare/semi-rare game from systems and at least doubles the price when he lists them. A few months ago he won a CIB Atlantis for the Odyssey 2 that I had bid on and less then a week later he had it listed for $200 more then he paid. He buys games under a different eBay id. What's sad is there are buyers out there gullible enough so that eBayers like this can turn a profit. If all buyers said, "I'm not paying these ridiculous above market prices" these flippers would soon take a loss on stuff and go away... Quote Link to comment Share on other sites More sharing options...
skip Posted July 10, 2016 Share Posted July 10, 2016 Please add me to the list too, one card with the shell/case. Thanks 1 Quote Link to comment Share on other sites More sharing options...
tunaysen Posted July 10, 2016 Share Posted July 10, 2016 Hello I'm Tunay. I'm interested on this great item. Please add me to the pre-order list. Great work!Thank you! 1 Quote Link to comment Share on other sites More sharing options...
plx Posted July 10, 2016 Share Posted July 10, 2016 Id like to buy one, too. Want to pre-order one cart to work with the Lynx I (the "unprotected" one). Thanks. 1 Quote Link to comment Share on other sites More sharing options...
SainT Posted July 11, 2016 Author Share Posted July 11, 2016 The overall power consumption of a Lynx with the new screen is higher than an unmodified Lynx. This has been measured in the screen thread. Didn't expect that, but the additional electronics draws much power. The CPLD consist of tenthousands, if not hundredthousands logic gates. I just tested the LynxSD with California Games ROM image and the original cart of California Games. There was no difference in power consumption that I could see -- both were running at about 390ma on the title and between 390-400ma in the game select screen. It would seem the static current draw of the LynxSD hardware is no more than a standard cart. 1 Quote Link to comment Share on other sites More sharing options...
SainT Posted July 11, 2016 Author Share Posted July 11, 2016 2 if those sd cards drain too much power from modded lynxes with new lcd screens, how about a revision wich uses chipsets made with smaller nn technology ,lfet's say from 45nn to a 20nn procces to make these chips smaller to consume way less power.(chinese chip factory anyway?). Alltrough, i don't mind as i don't have modded my lynx,may in the future if my lynx & screen dies. If you have an issue with power consumption on the 5v line the most sensible thing to do is to renew the components relating to the regulator (mosfet etc) or replace with dc-dc converter. Much has already been written about this. As noted above though, the power draw from the LynxSD seems to be no different to a standard cart. 1 Quote Link to comment Share on other sites More sharing options...
SainT Posted July 11, 2016 Author Share Posted July 11, 2016 I received my cart today and put it in my VGA screen-modded Lynx II and it won't boot up to the menu. If the 2048.o file is present it sometimes will start that, but it otherwise shows nothing except a garbled screen. I tried it on a stock Lynx II and it worked just fine (and yes, I plugged both into an AC adapter). Any thoughts on what the issue might be with the Lynx II I'd vastly prefer to use it on? Did you have any luck, Bill? Quote Link to comment Share on other sites More sharing options...
Andromeda Stardust Posted July 11, 2016 Share Posted July 11, 2016 I just tested the LynxSD with California Games ROM image and the original cart of California Games. There was no difference in power consumption that I could see -- both were running at about 390ma on the title and between 390-400ma in the game select screen. It would seem the static current draw of the LynxSD hardware is no more than a standard cart. That's good to know. A shame the McWill screen draws more current than the stock screen. Perhaps a "cheaper" mod to replace the Cold Cathode tube with high efficiency LEDs would reduce the current draw of the stock Lynx while only slightly improving the screen brightness/contrast. Quote Link to comment Share on other sites More sharing options...
SainT Posted July 11, 2016 Author Share Posted July 11, 2016 That's good to know. A shame the McWill screen draws more current than the stock screen. Perhaps a "cheaper" mod to replace the Cold Cathode tube with high efficiency LEDs would reduce the current draw of the stock Lynx while only slightly improving the screen brightness/contrast. There are a couple of options if it is an issue -- 1) Replace the voltage regulator for something more beefy, or uprate the components in the existing voltage regulation circuit to handle the additional current load. 2) Add an additional 5v regulator for the LED backlight (or the whole board) and run this direct to the unregulated source 1 Quote Link to comment Share on other sites More sharing options...
Andromeda Stardust Posted July 11, 2016 Share Posted July 11, 2016 I'm glad the compatibility issues with the McWill screens and the flash cart are out in the open now. Hopefully these issues are fixed. The HDMI NES and Everdrive N8 did not initially play nice either. Quote Link to comment Share on other sites More sharing options...
SainT Posted July 11, 2016 Author Share Posted July 11, 2016 (edited) I don't think there's any particular issue with the new screen and the cart, many people are running them together (myself included). I am only aware of the one case of them not working together, which could be down to so many things, not least of which 30 year old voltage regulation components. Edited October 25, 2019 by SainT 1 Quote Link to comment Share on other sites More sharing options...
+remowilliams Posted July 11, 2016 Share Posted July 11, 2016 2 if those sd cards drain too much power from modded lynxes with new lcd screens, how about a revision wich uses chipsets made with smaller nn technology ,lfet's say from 45nn to a 20nn procces to make these chips smaller to consume way less power.(chinese chip factory anyway?). Why aim low, go for the 0nn process. 1 Quote Link to comment Share on other sites More sharing options...
Run PC Posted July 12, 2016 Share Posted July 12, 2016 Please add me to any order list as well. THANKS! Quote Link to comment Share on other sites More sharing options...
Twoface2 Posted July 12, 2016 Share Posted July 12, 2016 That's good to know. A shame the McWill screen draws more current than the stock screen. Perhaps a "cheaper" mod to replace the Cold Cathode tube with high efficiency LEDs would reduce the current draw of the stock Lynx while only slightly improving the screen brightness/contrast. That's no shame at all. It's the (neccessary) interface that draws the current. If you are aiming at battery life, you could just do a LED Mod, but you still have the old washed out screen. I'm happy with the new screen, even if it draws more power. 1 Quote Link to comment Share on other sites More sharing options...
GadgetUK Posted July 12, 2016 Share Posted July 12, 2016 (edited) I received my cart today and put it in my VGA screen-modded Lynx II and it won't boot up to the menu. If the 2048.o file is present it sometimes will start that, but it otherwise shows nothing except a garbled screen. I tried it on a stock Lynx II and it worked just fine (and yes, I plugged both into an AC adapter). Any thoughts on what the issue might be with the Lynx II I'd vastly prefer to use it on? I would suspect your 5v line is a little too low - It could be signs that the MOSFET or Zener are on the way out. In the first instance I would get both components swapped out. If your 5v regulation fails you could risk a dead screen, dead motherboard and dead SD flash cart. Since you've tried PSU as well as batteries you can rule out the batteries. Is the PSU a genuine Atari PSU, if not - what voltage does it output? EDIT: You might also consider cleaning the cart slot - I wonder if you are getting a small voltage drop there from dirty contacts. You could do that by taking an old Lynx cart, put some IPA onto the cart edge and insert / remove the cart a dozen times or so into the Lynx. Then re-try with the SD cart. Edited July 12, 2016 by GadgetUK 2 Quote Link to comment Share on other sites More sharing options...
Bill Loguidice Posted July 12, 2016 Share Posted July 12, 2016 Did you have any luck, Bill? I'm afraid not, even with different power supplies. I'll probably have to commission someone to do a fix on my Lynx 2 at some point. Quote Link to comment Share on other sites More sharing options...
Bill Loguidice Posted July 12, 2016 Share Posted July 12, 2016 I would suspect your 5v line is a little too low - It could be signs that the MOSFET or Zener are on the way out. In the first instance I would get both components swapped out. If your 5v regulation fails you could risk a dead screen, dead motherboard and dead SD flash cart. Since you've tried PSU as well as batteries you can rule out the batteries. Is the PSU a genuine Atari PSU, if not - what voltage does it output? EDIT: You might also consider cleaning the cart slot - I wonder if you are getting a small voltage drop there from dirty contacts. You could do that by taking an old Lynx cart, put some IPA onto the cart edge and insert / remove the cart a dozen times or so into the Lynx. Then re-try with the SD cart. I tried an original and aftermarket Lynx supply, as well as a universal supply with additional voltage (and yes, there are fresh batteries in there as well). No luck. I will try the cleaning idea tonight. Thanks. 2 Quote Link to comment Share on other sites More sharing options...
SainT Posted July 13, 2016 Author Share Posted July 13, 2016 A bit of an update -- I've programmed, cased and tested coming up to 40 units from the new batch of PCB's. All looking fantastic, very pleased. I'm trying hard to get all of them built and tested this week and then start shipping again next week. 6 Quote Link to comment Share on other sites More sharing options...
marchingsaint621 Posted July 14, 2016 Share Posted July 14, 2016 A bit of an update -- I've programmed, cased and tested coming up to 40 units from the new batch of PCB's. All looking fantastic, very pleased. I'm trying hard to get all of them built and tested this week and then start shipping again next week. Quote Link to comment Share on other sites More sharing options...
marchingsaint621 Posted July 14, 2016 Share Posted July 14, 2016 A bit of an update -- I've programmed, cased and tested coming up to 40 units from the new batch of PCB's. All looking fantastic, very pleased. I'm trying hard to get all of them built and tested this week and then start shipping again next week. Yea he's back in business 1 Quote Link to comment Share on other sites More sharing options...
+thanatos Posted July 14, 2016 Share Posted July 14, 2016 Dang... 40 isn't enough to get to where I am on that list. 2 Quote Link to comment Share on other sites More sharing options...
philexile Posted July 14, 2016 Share Posted July 14, 2016 Hello, could you please add me to the preorder list? Thank you! 1 Quote Link to comment Share on other sites More sharing options...
bigbouge Posted July 14, 2016 Share Posted July 14, 2016 Please add me to the list, 1 unit too with the shell. Thank you. I Live in France is there a problem to send me the package. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.