Hi,   as promised in the old thread, I´ve make 20 pieces of Sys-Check V2.2 ready. The board is a ready-to-use external device, no need to solder.   Sys-Check V2.2 can be used with every XL (with PBI, so all models except the 1200 XL) and XE (which have an ECI). The XEGS and same rare 65XE/800XE models without ECI can´t used with Sys-Check.   The external solution Sys-Check V2.2 enables the following features: Diagnostic for dead (not starting) computers. In a lot of cases the computer wi