Jump to content
--- Ω ---

🖥 FlashROM 99 & FinalGROM 99 - Repository -- (07/19/2019)

Recommended Posts

Some one asked for PARSEC, so here it is...

 

Oh, nice, and the same process worked for TOD. Or at least the hacked up disk based loader of TOD that I have...

 

 

Fantastic, those were the next two I was going to poke around at! :D

 

In regards to the dragon pixel corruption on the title screen, the only other EA5 version I have seen also has similar corruption. I'm assuming that's the only bit of the game that was affected in conversion.

Share this post


Link to post
Share on other sites

I have to admit, I didn't try this image and the keyboard. I'll check it out after work.

 

I played lots of the parsec that is on the xb2.7 cart, with my USB keyboard. It worked like the TI keyboard, that is problems moving and firing at the same time.

 

 

 

[email protected]

Share this post


Link to post
Share on other sites

Fantastic, those were the next two I was going to poke around at! :D

 

In regards to the dragon pixel corruption on the title screen, the only other EA5 version I have seen also has similar corruption. I'm assuming that's the only bit of the game that was affected in conversion.

I've played this disk version quite a bit in the last year. But yesterday was the first time I tried it in classic99. The corruption on real iron is different than on classic99. The gameplay has always been fine though.

 

[email protected]

Share this post


Link to post
Share on other sites

 

 

Aaah great, thanks a lot :) This is an easy way, just testing it with the Classic99.

I have to hammer that into my head. 3 is inverted, 8 not.

 

So, for example, the " fbForth208.bin" is non-inverted.

 

no no, was a gag :D ....but I am sure I will ask again next month :)

 

thanks

 

Try:

 

INV3RT3D / N8T

 

(ok the 8 is a stretch, but for the needs of old farts with less than fully-functional memory synapses, it works)

  • Like 1

Share this post


Link to post
Share on other sites

It loads & plays, the speech works fine, but it appears there are a couple of graphic abnormalities.

 

Yep definitely something not right with the cross landing pads and the bottom border. Adding 'restore VDP' actually makes the pad graphics disappear and takes some bits out of the bottom border.

 

Oh well, back to letting people who know what they're actually doing do it. :D

Share this post


Link to post
Share on other sites

 

Oh well, back to letting people who know what they're actually doing do it. :D

 

Hey, it's still playable and it's not that bad at all! Keep plugging along! From this end it looks like you know what your doing, hell you got it to work!

Share this post


Link to post
Share on other sites

Gave it a shot with MASH, looks like it worked :)

 

attachicon.gifMASH9.BIN

Cool! Careful with the 9.bin stuff. I was WRONG when I started naming them 9.bin, because that is not what I meant to signify. I was trying to name them so that Classic99 would recognize it as a non-inverted bank switched rom from the Cartridge-User menu. 8.bin means that. 9.bin meant nothing.

I've tried to clean up my posts that had those 9.bin files in them. If you have downloaded them, take a moment to rename the file, so we don't create more confusion.

 

[email protected]

  • Like 1

Share this post


Link to post
Share on other sites

Yep definitely something not right with the cross landing pads and the bottom border. Adding 'restore VDP' actually makes the pad graphics disappear and takes some bits out of the bottom border.

 

Oh well, back to letting people who know what they're actually doing do it. :D

A large set of TI programs never heard of initializing their variables. Cartridge software designed to work from power on state with nothing else getting to run before it was particularly guilty. At least that is my impression.

Some of the conversions to EA5 from cartridge needed patches to fix up that start up state. At some point, this pursuit will probably require writing some assembly code. :)

 

[email protected]

  • Like 1

Share this post


Link to post
Share on other sites

I've tried to clean up my posts that had those 9.bin files in them. If you have downloaded them, take a moment to rename the file, so we don't create more confusion.

 

Got it. Also why I pulled the MASH file off, to prevent junk floating around.

 

 

A large set of TI programs never heard of initializing their variables. Cartridge software designed to work from power on state with nothing else getting to run before it was particularly guilty. At least that is my impression.

Some of the conversions to EA5 from cartridge needed patches to fix up that start up state. At some point, this pursuit will probably require writing some assembly code. :)

 

 

Yes I was afraid that might be the case. Definitely needs to be left to the smart people there. :)

 

 

Hey, it's still playable and it's not that bad at all! Keep plugging along! From this end it looks like you know what your doing, hell you got it to work!

 

Okay, if you insist :D

 

Try this:

 

 

Frogger.BIN (requires 32K expansion) (requires joystick in port 2)

  • Like 2

Share this post


Link to post
Share on other sites

It is my first conversion of this game coded by a my italian friend and compiled by Matthew Splett with added Joystick Support

 

it seems to work but i think it need +32K expansion, it is normal ?

the original game was in XB.

MARSATTACK.BIN

Edited by ti99iuc
  • Like 3

Share this post


Link to post
Share on other sites

It is my first conversion of this game of my italian friend and compiled by by Matthew Splett with added Joystick Support

 

it seems to work but i think it need +32K expansion, it is normal ?

the original game was in XB.

 

 

E le grandi opere. Grazie molto!

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...