Jamma 60-1 help

[wchoutdoors]

Hey guys I am new to the whole Jamma world. We just got a old Ms Pacman cabinet and ordered the Jamma 60-1 kit from Holland computers and a 19" monitor. We are not using the old harness only using the new kit.

 

We have it all hooked up and it powers up just fine. The issue is we can not add credits, or the stick will not move at all. It just runs through the screens showing the games. I am sure it is something very easy I am missing, but noon of the buttons or stick responds. Thanks for the help.

 

Allen

[VectorGamer]

I have a 60-in-1 (which I upgraded to a 412-in-1) and I found it pretty easy to hook up. I ordered a standard JAMMA wiring harness for it and just wired it up per the documentation. It sounds like you just need to revisit your connections.

[Jeremy Popp]

Hey guys I am new to the whole Jamma world. We just got a old Ms Pacman cabinet and ordered the Jamma 60-1 kit from Holland computers and a 19" monitor. We are not using the old harness only using the new kit.

 

We have it all hooked up and it powers up just fine. The issue is we can not add credits, or the stick will not move at all. It just runs through the screens showing the games. I am sure it is something very easy I am missing, but noon of the buttons or stick responds. Thanks for the help.

 

Allen

 

I would check your ground wires running to the joysticks/buttons as well as to the coin slots. Since ALL the buttons don't work maybe it's something like that.