Jump to content
wdatkinson

FlashROM99 16k Images

Recommended Posts

Greetings Members!

 

I've recently purchased a TI99/4A as it was my very first computer. I've ordered, built and tested the FlashROM99 board. My issue now seems to be locating images that will run on a stock 16k 4A. I've searched through multiple threads via the Google and on this forum, and everything seems to be for 4A's with the 32k add-on.

 

Any advice/pointers toward a repository of 16k compatible images? So far the only one I've been able to locate is PitFall. I remember running TI Invaders, Car Wars, Munchman, Tombstone City, etc., on my stock TI when I was a kid.

 

Thanks in advance.

  • Like 1

Share this post


Link to post
Share on other sites

Glad to be here!

 

I'd found the post you referenced, but that's where I started discovering the 32k requirement.... Seems like most of them are 32k.... I read something about an EA5 conversion making a 16k image require 32k, but I'm not yet familiar with the various image versions, so that's why I'm here!

Share this post


Link to post
Share on other sites

Greetings Members!

 

I've recently purchased a TI99/4A as it was my very first computer. I've ordered, built and tested the FlashROM99 board. My issue now seems to be locating images that will run on a stock 16k 4A.

 

Many of the images in the Classic_Carts.zip located << HERE >>

Just try the ones shown on your PC as 8K or 16K and see what you like or what works.

 

FYI - Barrage, the current contest game works fine.

post-35324-0-02452600-1468799386_thumb.jpg

  • Like 1

Share this post


Link to post
Share on other sites

And good luck to you!! There are soooooo many good games on the TI. You are in for quite the ride. :)

  • Like 1

Share this post


Link to post
Share on other sites

Hi 'wdatkinson', I am in the same boat as yourself (plain / standard TI-99/4a).
I eventually sorted out a decent selection of files that appear to all work fine.

I hope nobody minds if I post a zip of them.

This provides almost 5 full pages / screens on the FlashROM menu.

It is a nice 'Starter Pack' for those without any memory expansion.

 

Cheers,

Shane

FlashROM99 software that does not require 32k.zip

  • Like 9

Share this post


Link to post
Share on other sites

Updated this a little.

Removed a duplicate file and added a few others and a couple of demos.

 

Below is the file list (5 full pages on the FlashRom99 plus 4 files on the 6th page).

 

If anybody has anything not on this list then please share or let me know and I will add to this list (must run on a stock standard TI-99/4A

 

post-37708-0-50509300-1470302156_thumb.jpg

 

Cheers,

Shane

 

FlashROM99 software that does not require 32k v2.zip

Edited by 00WReX
  • Like 3

Share this post


Link to post
Share on other sites

Updated this a little.

Removed a duplicate file and added a few others and a couple of demos.

 

Below is the file list (5 full pages on the FlashRom99 plus 4 files on the 6th page).

 

If anybody has anything not on this list then please share or let me know and I will add to this list (must run on a stock standard TI-99/4A

 

attachicon.gifFileList.jpg

 

Cheers,

Shane

 

attachicon.gifFlashROM99 software that does not require 32k v2.zip

Feel free to throw in my new musick program done in extended basic. It does not require 32k as it's made for tape transfers and must be under 12k for such a thing. Here's the link but do scroll to the bottom for the **FINAL** version which is 1.6 at the moment.

 

http://atariage.com/forums/topic/255396-new-musick-program/

Edited by Sinphaltimus

Share this post


Link to post
Share on other sites

Feel free to throw in my new musick program done in extended basic. It does not require 32k as it's made for tape transfers and must be under 12k for such a thing. Here's the link but do scroll to the bottom for the **FINAL** version which is 1.6 at the moment.

 

http://atariage.com/forums/topic/255396-new-musick-program/

 

FlashROM-99 cannot store or run Extended Basic programs. It can only be used for loading 8KiB – 32KiB, bank-switched ROM programs.

 

...lee

Share this post


Link to post
Share on other sites

Hi Guys,

 

I have build up this nice device myself by seeking for components and outsourcing the PCB to Elecrow. The build up is pretty much straightforward and the ATMEL programming + fuse programming was done according to instructions.

Now the only thing I can get from the device once inserted into the slot and the TI99 powered up is a 2x blinking of the led :( . The troubleshooting state a 2x led blinking is a bad or corrupted filesystem. I have tried 4 different SD card brand and sizes all in FAT32 format but still the same.

 

Any of you had this problem using a particular SD card brand or has solved it in any way? Does anyone can confirm a working SD card brand?

I have 3 areas where to look at : the 377 TLL is not an HCT but a LS instead (was not available at time of purchase) and should work but not tested by Ralph. The second is the Arduino SD Module I got from E-bay and it may be faulty. (it as a 3.3v and a 5v pin input and as far as I understood only the 5v input is used by the Flashrom99 PCB). Third one can just be all my SD cards not compatible even if this is really an unlucky situation. :-o

Thanks

Rick

Share this post


Link to post
Share on other sites

What cards are you trying? The 4GB cards are generally safe in almost any brand (I've not had any fail me).

Make sure you place your .bin files in the card's ROOT directory, not in a folder.

 

regards

 

Stephen

Share this post


Link to post
Share on other sites

Hi Guys,

 

I have build up this nice device myself by seeking for components and outsourcing the PCB to Elecrow. The build up is pretty much straightforward and the ATMEL programming + fuse programming was done according to instructions.

Now the only thing I can get from the device once inserted into the slot and the TI99 powered up is a 2x blinking of the led :( . The troubleshooting state a 2x led blinking is a bad or corrupted filesystem. I have tried 4 different SD card brand and sizes all in FAT32 format but still the same.

 

Any of you had this problem using a particular SD card brand or has solved it in any way? Does anyone can confirm a working SD card brand?

I have 3 areas where to look at : the 377 TLL is not an HCT but a LS instead (was not available at time of purchase) and should work but not tested by Ralph. The second is the Arduino SD Module I got from E-bay and it may be faulty. (it as a 3.3v and a 5v pin input and as far as I understood only the 5v input is used by the Flashrom99 PCB). Third one can just be all my SD cards not compatible even if this is really an unlucky situation. :-o

Thanks

Rick

 

likely its the reader.. that was my biggest problem building these until I found the ones that work correctly, the reader must have a good voltage regulator on board to pull down the 5v from the ti to 3.3v, also I've seen consoles that pushed more than 5v to the cart port which causes the reader to be unhappy as well

Share this post


Link to post
Share on other sites

hello all.  i just received my flashrom99 today.  i highly considered the finalrom99, but being relatively new to the platform, i decided to start out small

and work my way up later, as far as gettin acquainted with the library.  i love it so far.  

Share this post


Link to post
Share on other sites

Yeah, you'll have lots to explore even just in the 8K domain.  And the 32K sidecar (or a NanoPEB) may have appeal down the line, if you ever want to open yourself up to the remainder of the library. 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...