tep392 Posted September 10, 2016 Share Posted September 10, 2016 I would like one cart please. Quote Link to comment Share on other sites More sharing options...
Gandor Posted September 10, 2016 Share Posted September 10, 2016 (edited) I would like one complete unit Edited September 10, 2016 by Gandor Quote Link to comment Share on other sites More sharing options...
santosp Posted September 10, 2016 Share Posted September 10, 2016 We have updates.... Pcb's arrived here in white color as to much better with transparent plastic enclosures. 1st device completed and work flawlessly! Pictures follow on initial post. http://atariage.com/forums/topic/255512-ultimate-sd-cart-another-possible-run/page-3?do=findComment&comment=3586511 4 Quote Link to comment Share on other sites More sharing options...
+Larry Posted September 10, 2016 Share Posted September 10, 2016 Outstanding! -Larry 2 Quote Link to comment Share on other sites More sharing options...
arctus Posted September 10, 2016 Share Posted September 10, 2016 I would be interested in one complete unit. Quote Link to comment Share on other sites More sharing options...
tep392 Posted September 10, 2016 Share Posted September 10, 2016 Awesome looking cart! 1 Quote Link to comment Share on other sites More sharing options...
areeve Posted September 11, 2016 Share Posted September 11, 2016 I'd like to get one of the last 20 too. $40 is the total cost shipped or is that just a deposit? Please PM me with what I need to do. - Thanks, Alan Quote Link to comment Share on other sites More sharing options...
+David_P Posted September 11, 2016 Share Posted September 11, 2016 Santos, if there is still one available on this run, please PM me. Alan: Cost is $85+$7 S/H; the $40 is an initial deposit. 1 Quote Link to comment Share on other sites More sharing options...
santosp Posted September 15, 2016 Share Posted September 15, 2016 An update... Construction of pcb's continue. Almost all the difficult side of pcb (fpga, ram, digital bus, oscillator) is completed x30 pieces. Now I will start to work the other side. 8 Quote Link to comment Share on other sites More sharing options...
atarian63 Posted September 19, 2016 Share Posted September 19, 2016 Please add me for 2 Quote Link to comment Share on other sites More sharing options...
Schmutzpuppe Posted September 21, 2016 Share Posted September 21, 2016 I would like one too Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted September 21, 2016 Share Posted September 21, 2016 I believe this run is sold out - atarian63 & schmutzpuppe Macrorie is doing a run stateside - I would get in on it quickly before it sells out http://atariage.com/forums/topic/256980-ultimate-sd-cart-run-us-source-nov-30-ship-date-25-in-run/?do=findComment&comment=3592098 Quote Link to comment Share on other sites More sharing options...
santosp Posted September 21, 2016 Share Posted September 21, 2016 (edited) I would like one too I believe this run is sold out - atarian63 & schmutzpuppe Macrorie is doing a run stateside - I would get in on it quickly before it sells out http://atariage.com/forums/topic/256980-ultimate-sd-cart-run-us-source-nov-30-ship-date-25-in-run/?do=findComment&comment=3592098 Yes, from schmutzpuppe member and after, please express your interest for an Ultimate cartridge on McRorie's thread. The same applies for the members who contact me via p.m., but not prepaid. My list's two rounds have now closed/completed. Thank everyone who participated on this. Edited September 21, 2016 by santosp Quote Link to comment Share on other sites More sharing options...
santosp Posted September 21, 2016 Share Posted September 21, 2016 Update info.... All the first round of cartridges (30 pieces) are now completed and tested for good operation. I have only some delay with the plastic enclosures, waiting to get the rest of them. Initially I had in my possession only 40 pieces, and now wait some more as to cover all the orders. So does and the CNC machine. Why? Because isn't possible to cut some now and the rest after. The agreed price is for one cut for all the enclosures, and a second cut will cost till the double money. Therefore at the end of this week will be here, and will go directly for cutting! As for the second round, pcb's is at the end of fabrication process, and till Monday will be here. In a bit I will order also the electronics parts to be here early the next week, as to start directly the construction. My purpose is to prepared and wait only the last part... the FPGA. More later.... 1 Quote Link to comment Share on other sites More sharing options...
santosp Posted September 21, 2016 Share Posted September 21, 2016 4 Quote Link to comment Share on other sites More sharing options...
Guest Posted September 21, 2016 Share Posted September 21, 2016 Santos would it be possible to publish lists showing who is in which batch of deliveries - ie those nearly complete, and those awaiting parts and consruction - at least then, no one would be disappointed Quote Link to comment Share on other sites More sharing options...
santosp Posted September 21, 2016 Share Posted September 21, 2016 Santos would it be possible to publish lists showing who is in which batch of deliveries - ie those nearly complete, and those awaiting parts and consruction - at least then, no one would be disappointed Hi. The list is in below post, updated from the first time... http://atariage.com/forums/topic/255512-ultimate-sd-cart-another-possible-run/page-3?do=findComment&comment=3586511 1 Quote Link to comment Share on other sites More sharing options...
Wilheim Posted September 30, 2016 Share Posted September 30, 2016 Hi! Am I still on time to get one? I really want to buy it! Pleeeeeease!! Quote Link to comment Share on other sites More sharing options...
lostmorex Posted October 2, 2016 Share Posted October 2, 2016 Hy Santos, please set me on the list for the next run and give me details for a prepayment. Thanxs! Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted October 3, 2016 Share Posted October 3, 2016 Hi! Am I still on time to get one? I really want to buy it! Pleeeeeease!! http://atariage.com/forums/topic/256980-ultimate-sd-cart-run-us-source-nov-30-ship-date-25-in-run/?do=findComment&comment=3592098 Macrorie has room left on his run... Might be the last run for awhile as the chips are getting hard to source. Quote Link to comment Share on other sites More sharing options...
+orpheuswaking Posted October 3, 2016 Share Posted October 3, 2016 Hy Santos, please set me on the list for the next run and give me details for a prepayment. Thanxs! http://atariage.com/forums/topic/256980-ultimate-sd-cart-run-us-source-nov-30-ship-date-25-in-run/?do=findComment&comment=3592098 Macrorie has room left on his run... Might be the last run for awhile as the chips are getting hard to source. Quote Link to comment Share on other sites More sharing options...
lostmorex Posted October 3, 2016 Share Posted October 3, 2016 Thank you for the hint orpheus! Quote Link to comment Share on other sites More sharing options...
santosp Posted October 4, 2016 Share Posted October 4, 2016 I spent truly beautiful making these. Now is time for shipping to their new owners. A memento picture with these small things last time together. 12 Quote Link to comment Share on other sites More sharing options...
AtariGeezer Posted October 4, 2016 Share Posted October 4, 2016 I spent truly beautiful making these. Now is time for shipping to their new owners. A memento picture with these small things last time together. 20161004_214442.jpg Do you have any of those beautiful cases left / extra? 1 Quote Link to comment Share on other sites More sharing options...
Napo2Leon Posted October 4, 2016 Share Posted October 4, 2016 I would like one thanks, Angus Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.