Datzilla Posted October 12, 2016 Share Posted October 12, 2016 (edited) Vectrex CLEAR Cartridge Case/Shell Production Campaign I was talking to Sean Kelly about buying some CLEAR cartridge cases and he informed that, although he had no clear cases available, he could have them produced. The downside of this situation is that the manufacturer has a 2,000 piece minimum for the order and, quite understandably, Sean can not front the entire production cost only to HOPE that we will buy enough for him to recover his investment in a reasonable amount of time. . With that in mind, I am posting this info to gauge interest in a CLEAR cartridge case production run. These will NOT be 3D printed units or low quality knock-off cases...we are talking about exact clones of the original case design with the same quality material but made with CLEAR plastic. Why CLEAR cases? I suppose I would blame Vectrex Roli because I saw him putting homebrew PCBs into the clear cases for protection and display...do they not look great in the picture? .Sean is willing to have the clear cases made if we can get at least 1,500 units reserved/spoken for BEFORE he places the order. The price will be $5 per case BUT please keep in mind that the price could change depending on exchange rates and material costs or a few other factors..**At this point NO money needs to change hands**.We shall start by building a reservation list to see if there is enough interest in our community to make this happen. IF we reach the goal of 1,500 units, I will post specific payment instructions so that we can move to the production phase. Once all the payments have been received by Sean, he will place the order to have the the cases produced and it SHOULD take approximately 6 weeks for Sean to receive the cases. Please note, I will NOT be receiving any payments nor will I be shipping any cases. ALL payments will be made directly to Sean Kelly and he will handle the shipping..Please do NOT message Sean with questions about this campaign directly. Just post up any questions you have right here in this thread so we can all keep track of all questions and responses..Finally, if you are interested in getting some of these top quality clear cases, reply to this post with the number of cases you want and what country they will be shipped to and I will keep a list of all buyers and quantities updated. Also, if you have already posted a reservation in the FaceBook Group: Vectrex Fans Unite! you do not need to reply here. If you are not a member of that group, come over and join..Here is a link to the current reservation list, it will be updated as new reservations are made: 2016 Clear Cart Reservation List Edited October 12, 2016 by Datzilla 3 Quote Link to comment Share on other sites More sharing options...
CatPix Posted October 21, 2016 Share Posted October 21, 2016 5$ a case... Even if the price double that's still a deal. I would only need one, but I talk some friends around me about JFMateos multicart, so they could be interested by a case as well. I'll take 5 of them. 1 Quote Link to comment Share on other sites More sharing options...
vectrexroli Posted October 21, 2016 Share Posted October 21, 2016 5$ a case... Even if the price double that's still a deal. I would only need one, but I talk some friends around me about JFMateos multicart, so they could be interested by a case as well. I'll take 5 of them. I put 1 Mateos cart into a blue clear shell, which looks great of course, a 2nd one in a dark grey one, at the 3rd I failed using a repro Vectrex cart shell, as the rotary switch did not stick out far enough, that one I built into the 3D printed case you can buy from a forum member on eBay, with that one I had slight issues with the position of the hole for the pause button though. So it depends which version of the Mateos cart you got, it seems there were slight differences. Quote Link to comment Share on other sites More sharing options...
CatPix Posted October 21, 2016 Share Posted October 21, 2016 Mine is the V1.3 2014. If the only issue with the shells are the buttons I'm pretty sure I can deal with it and manage to find taller button "caps". Thanks for the feedback Quote Link to comment Share on other sites More sharing options...
+KylJoy Posted October 22, 2016 Share Posted October 22, 2016 Heck, I'll take 2. Quote Link to comment Share on other sites More sharing options...
Datzilla Posted October 24, 2016 Author Share Posted October 24, 2016 The reservation list has been updated and is current as of this post. We has surpassed the 33% mark! Please post this campaign on any other Vectrex sites and then update this thread with a link to your shared post! Thanks! Quote Link to comment Share on other sites More sharing options...
+KylJoy Posted November 3, 2016 Share Posted November 3, 2016 Aw, shucks.... three more for me to make it a total of five. 1 Quote Link to comment Share on other sites More sharing options...
Brood69 Posted November 3, 2016 Share Posted November 3, 2016 I will go for 5 (toi be sent to Belgium) Quote Link to comment Share on other sites More sharing options...
Brood69 Posted November 3, 2016 Share Posted November 3, 2016 The same in bigger I will go for 5 (to be sent to Belgium) It does not make 10... 1 Quote Link to comment Share on other sites More sharing options...
Datzilla Posted November 6, 2016 Author Share Posted November 6, 2016 Thank you guys. The Reservation List has been updated as of this reply. Quote Link to comment Share on other sites More sharing options...
+KylJoy Posted May 28, 2017 Share Posted May 28, 2017 Well, I will now take a total of 10! I keep finding uses for these. Quote Link to comment Share on other sites More sharing options...
genfuyung Posted May 30, 2017 Share Posted May 30, 2017 I'd like 5 if possible. Shipped to the US. Quote Link to comment Share on other sites More sharing options...
dphirschler Posted June 15, 2017 Share Posted June 15, 2017 Five for me, please. Just got my Vectrex today. :-) Darryl Quote Link to comment Share on other sites More sharing options...
+Tarzilla Posted June 15, 2017 Share Posted June 15, 2017 Ten for me. Quote Link to comment Share on other sites More sharing options...
redrumh2o Posted June 15, 2017 Share Posted June 15, 2017 I'll take 5 Quote Link to comment Share on other sites More sharing options...
128Kgames Posted June 25, 2017 Share Posted June 25, 2017 You can put me down for 20 cases. I don't need 20, but if it helps get things closer to the goal, I'll find a use for them. Besides, you know after the run happens someone is going to ask "are there any more clear cases left?" and bam, right there to help them. Quote Link to comment Share on other sites More sharing options...
+KylJoy Posted June 25, 2017 Share Posted June 25, 2017 You are right. There will be many uses for them. I'll go to 20. Quote Link to comment Share on other sites More sharing options...
Mayhem Posted June 25, 2017 Share Posted June 25, 2017 Probably would be interested in another five here Quote Link to comment Share on other sites More sharing options...
redrumh2o Posted June 25, 2017 Share Posted June 25, 2017 I'll take 10 more actually so 15 total! Quote Link to comment Share on other sites More sharing options...
SiLic0ne t0aD Posted June 26, 2017 Share Posted June 26, 2017 Bump my order from 5 to 10 please! Quote Link to comment Share on other sites More sharing options...
redrumh2o Posted June 26, 2017 Share Posted June 26, 2017 No updates since 11/6? Quote Link to comment Share on other sites More sharing options...
dphirschler Posted July 18, 2017 Share Posted July 18, 2017 I thought I remember seeing the goal was reached and we should be getting emails soon. But nothing so far in my email box (or PMs here)... (or FB). Darryl Quote Link to comment Share on other sites More sharing options...
Vectrexer Posted July 18, 2017 Share Posted July 18, 2017 Direct URL to the FB Message Thread for the Vectrex CLEAR Cartridge Case/Shell Production Campaign https://www.facebook.com/groups/104852679725118/permalink/516602125216836/ Quote Link to comment Share on other sites More sharing options...
128Kgames Posted July 18, 2017 Share Posted July 18, 2017 Links not working for me. Quote Link to comment Share on other sites More sharing options...
MortoffGames Posted August 24, 2017 Share Posted August 24, 2017 Is there any interest in these still? I could have them made easily. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.