Jump to content
Sign in to follow this  
Omega-TI

What can you come up with? -- TI Brainstorming

Recommended Posts

What kind of future project can you dream of that would use ALL of the following TOGETHER.

 

1) The Joystick Port

2) The Cassette Port

3) The 12v power from the back

4) The audio out from the back

 

You can also link the project with the side port, but that is not required.

Share this post


Link to post
Share on other sites

Synchronized drone control.

 

That would be sweet, but imagine the kind of computational load the TI would need there...

Share this post


Link to post
Share on other sites

 

That would be sweet, but imagine the kind of computational load the TI would need there...

I imagine the ti acting like the program and simply manipulating the control signal in a dumb way.

 

Think 1970s "Big Trax". Up 10, turn left 45 degrees, forward 5, down 10, etc...

 

The numbers being arbitrary to what the modder wants.

 

So it could simply control motors on and off clockwise counter clockwise clamped to a remote control OR wire directly to the remote control contacts.

 

Maybe an intermediary device to translate signals from the ti in to something the controller understands.

Share this post


Link to post
Share on other sites

The Big Trax did not have to factor for wind speed and direction, so unless a human was in the loop as the active pilot, there would have to be GPS data taken into account processed and then used to keep the drone on course without deviation.

Share this post


Link to post
Share on other sites

The Big Trax did not have to factor for wind speed and direction, so unless a human was in the loop as the active pilot, there would have to be GPS data taken into account processed and then used to keep the drone on course without deviation.

Not for an indoor demonstration.

Share this post


Link to post
Share on other sites

 

I imagine the ti acting like the program and simply manipulating the control signal in a dumb way.

 

Think 1970s "Big Trax". Up 10, turn left 45 degrees, forward 5, down 10, etc...

 

The numbers being arbitrary to what the modder wants.

 

So it could simply control motors on and off clockwise counter clockwise clamped to a remote control OR wire directly to the remote control contacts.

 

Maybe an intermediary device to translate signals from the ti in to something the controller understands.

TI LOGO? ;)

Share this post


Link to post
Share on other sites

What kind of future project can you dream of that would use ALL of the following TOGETHER.

 

1) The Joystick Port__________________PS/2 Keyboard input

2) The Cassette Port__________________Relay control/ MP3 Record & Playback

3) The 12v power from the back________Power supply for VGA board____from Video out port

4) The audio out from the back________to Amplifier & Speaker________from Video out port

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...