Jump to content
alsp

SDrive-ARM preorder

Recommended Posts

Hi!

 

This topic opened by community recommendation (continuation of marketplace topic).

Its needed to collect requests for new device with temporary name SDrive-ARM.

Please check details with additional photos on github and video with example of functionality.

Short characteristics:

  • SDrive was developed originally by C.P.U. team in 2008 and use AT Mega 8 processor;
  • It is extension of previous project with following features:
    • Works with Atari 8-bit systems like Atari 800, 800xl, XE/GS, etc.
    • 5V compatible 32bit Cypress CY8C4245AXI ARM processor with:
      • 48 MHz core
      • 32Kb Flash
      • 4Kb RAM
    • MicroSD card reader
    • Capacitive buttons (Next drive, Prev drive, Boot drive)
    • 6 LEDs (1 green, 1 red and 4 yellow)
    • Reset button
    • Each SIO pin connected to ARM I/O pin (Possibility for functionality extension)
    • One RW/RO switch for microSD card
    • original drive ID's switchng DIPs excluded

Estimated prices:

  • PCB + Case- $15;
  • PCB + Case + pre-programmed ARM + all required components for assembling - $33 (changed position - I've decide to add all required components to simplify assembling);
  • Assembled device - $50;

Please write in this topic if you want to buy.

Preorders from previous topic:

  • ravard - 1 assembled device + PCB + Case;
  • JoSch - 1 assembed device?;
  • Philsan - 1 assembled device;
  • beamer320i - 1 assembled device;
  • gozar - 2 assembled devices;
  • Firedawg - 1 assembled device + 2 PCB + 2 Cases;
  • akator - 1 assembled device;
  • fastofruto - 1 assembled device;
  • Witchboard - 1 PCB + 1 Case + 1 pre-programmed ARM (Can add all required components for additional 8$);
  • tep392 - 1 assembled device;
  • AtariBuff - 1 assembled device;
  • Sleepy - 1 assembled device;
  • skel28 - 1 assembled device;
  • skr - 1 assembled device;

PS: I plan to start assembling at beggining of April after arriving requited components and PCB

post-22355-0-49646600-1487707059_thumb.jpg

post-22355-0-46678900-1487707076_thumb.jpg

post-22355-0-37341200-1487707106_thumb.jpg

  • Like 9

Share this post


Link to post
Share on other sites

One assembled - if delivery to germany is possible and the cost for postage are not too high.

Delivery price to Germany should be around $7-10.

Share this post


Link to post
Share on other sites

I'm in for 1 assembled and 1 PCB + Case + pre-programmed ARM + all required components for assembling.

Share this post


Link to post
Share on other sites

 

Which color do you need?

 

Not sure, I was just curious :D Black, Purple, Grey etc?

 

I would probably change the screws to black also, just for my own aesthetics. As long as I can find some the right size

Edited by orpheuswaking

Share this post


Link to post
Share on other sites

 

Not sure, I was just curious :D Black, Purple, Grey etc?

 

I would probably change the screws to black also, just for my own aesthetics. As long as I can find some the right size

Too dark and you might not be able to see the LEDs shining through.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...