Jump to content
IGNORED

SDrive-ARM preorder


alsp

Recommended Posts

 

Is it ok, what's the procedure to be on the waiting list for an order ?

 

Just wait, when your device will be ready, I'll ask you for your your e-mail for PayPal invoice by PM.

Link to comment
Share on other sites

Next set of packages are sent. Everyone who has paid invoices should receive tracking numbers via PayPal. If not - please write me.

PS: Only 2 items remains for preorder...

Edited by alsp
  • Like 4
Link to comment
Share on other sites

I would like to purchase a fully assembled unit, please.

Ok!

 

Last one remains for preorder, after it PCB's is over and devices will be available only if some one cancel preorder...

Link to comment
Share on other sites

Current queue:

  • Sleepy - 1 assembled device (no answer)
  • orpheuswaking - 1 assembled device (postponed)
  • Evidious - 1 assembled device
  • twh/f2 - 1 assembled device
  • tuf - 1 assembled device
  • Poison - 1 assembled device (postponed)
  • awesp - 2 assembled devices
  • skywalkeriom - 1 assembled device (postponed)
  • rdemming - 1 assembled device
  • pedgarcia - 1 assembled device
  • WildBill777 - 1 assembled device
  • gobo - 1 assembled device
  • davidcalgary29 - 2 assembled devices
  • tecci06 - 1 assembled device
  • ijor - 1 assembled device
  • fandenivoldsk - 2 assembled devices
  • pseudografx - 1 assembled device
  • uunek - 1 assembled device
  • RodLightning - 1 assembled device
  • WIZZARD77 - 1 assembled device
  • slx - 1 assembled device
  • rkindig - 1 assembled device
  • yerzmyey - 1 assembled device
  • pjbramley - 1 assembled device
  • Lios - 1 assembled device
  • xrbrevin - 1 assembled device
  • waryl - 1 assembled device
  • Chongo Chile - 2 assembled devices
  • arctus - 1 assembled device
  • Bumzyman - 1 assembled device
  • mattsoft - 1 assembled device
  • killersquirel - 1 assmbled device
  • Mr.Bacardi - 1 assembled device
  • FULS - 1 assembled device
  • Cyprian_K - 1 assembled device
  • EamonShoot - 1 assembled device
  • wemichener - 1 assembled device
  • looney bin jim - 1 assembled device
  • AtariLeaf - 1 assembled device
  • Paul Westphal - 2 assembled devices
  • vazquezrick - 1 something?
  • manopac - 1 assembled device
  • dragos - 1 DIY Kit
  • jmtech - 1 assembled device
  • kkroos - 1 assembled device
  • ColinHunt - 1 assembled device
  • Nezgar - 2 assembled devices
  • dvallet - 1 assembled device
  • trolld40 - 1 assembled device
  • Kabluey - 1 assembled device
  • freaktmp - 1 assembled device
  • Ice Cream Jonsey - 1 assembled device
  • Mi1ez - 1 assembled device
  • Soultan - 1 assembled device
  • JohnBlbec - 1 assembled device
PS: production speed around 10 devices per week.
  • Like 3
Link to comment
Share on other sites

Out of curiosity, what is the total number of devices ordered? I really did not expect such a large customer base :)

 

It's not a secret and can be easily counted =) So I've order 125 PCBs - each one preordered.

I hope we can make perfect software for device togeather =)

PS: I've also don't expect so much preorders...

Edited by alsp
  • Like 6
Link to comment
Share on other sites

Yeah I can barely use through hole, I would totally screw this up if I got the kit.

 

Not true. you did an excellent job assembling your XEL, and I was truly impressed. I suspect you would do the same with this product as well, although being as careful as you are, it might take awhile before it was completed ;)

 

- Michael

Link to comment
Share on other sites

Hi!

 

This topic opened by community recommendation (continuation of marketplace topic).

Its needed to collect requests for new device with temporary name SDrive-ARM.

Please check details with additional photos on github and video with example of functionality.

Short characteristics:

  • SDrive was developed originally by C.P.U. team in 2008 and use AT Mega 8 processor;
  • It is extension of previous project with following features:
    • Works with Atari 8-bit systems like Atari 800, 800xl, XE/GS, etc.
    • 5V compatible 32bit Cypress CY8C4245AXI ARM processor with:
      • 48 MHz core
      • 32Kb Flash
      • 4Kb RAM
    • MicroSD card reader
    • Capacitive buttons (Next drive, Prev drive, Boot drive)
    • 6 LEDs (1 green, 1 red and 4 yellow)
    • Reset button
    • Each SIO pin connected to ARM I/O pin (Possibility for functionality extension)
    • One RW/RO switch for microSD card
    • original drive ID's switchng DIPs excluded

Estimated prices:

  • PCB + Case- $15;
  • PCB + Case + pre-programmed ARM + all required components for assembling - $33 (changed position - I've decide to add all required components to simplify assembling);
  • Assembled device - $50;

Please write in this topic if you want to buy.

Preorders from previous topic:

  • ravard - 1 assembled device + PCB + Case;
  • JoSch - 1 assembed device?;
  • Philsan - 1 assembled device;
  • beamer320i - 1 assembled device;
  • gozar - 2 assembled devices;
  • Firedawg - 1 assembled device + 2 PCB + 2 Cases;
  • akator - 1 assembled device;
  • fastofruto - 1 assembled device;
  • Witchboard - 1 PCB + 1 Case + 1 pre-programmed ARM (Can add all required components for additional 8$);
  • tep392 - 1 assembled device;
  • AtariBuff - 1 assembled device;
  • Sleepy - 1 assembled device;
  • skel28 - 1 assembled device;
  • skr - 1 assembled device;

PS: I plan to start assembling at beggining of April after arriving requited components and PCB

Hi There!

I would like one fully assembled and ready to use, just let me know where I should send the paypal payment to.

 

Thanks!

Stephen J. Carden

Edited by Stephen J. Carden
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...