SDrive-ARM preorder

[alsp]

Hi!

 

This topic opened by community recommendation (continuation of marketplace topic).

Its needed to collect requests for new device with temporary name SDrive-ARM.

Please check details with additional photos on github and video with example of functionality.

Short characteristics:

• SDrive was developed originally by C.P.U. team in 2008 and use AT Mega 8 processor;
• It is extension of previous project with following features:
  • Works with Atari 8-bit systems like Atari 800, 800xl, XE/GS, etc.
  • 5V compatible 32bit Cypress CY8C4245AXI ARM processor with:
    • 48 MHz core
    • 32Kb Flash
    • 4Kb RAM
  • MicroSD card reader
  • Capacitive buttons (Next drive, Prev drive, Boot drive)
  • 6 LEDs (1 green, 1 red and 4 yellow)
  • Reset button
  • Each SIO pin connected to ARM I/O pin (Possibility for functionality extension)
  • One RW/RO switch for microSD card
  • original drive ID's switchng DIPs excluded

Estimated prices:

• PCB + Case- $15;
• PCB + Case + pre-programmed ARM + all required components for assembling - $33 (changed position - I've decide to add all required components to simplify assembling);
• Assembled device - $50;

Please write in this topic if you want to buy.

Preorders from previous topic:

• ravard - 1 assembled device + PCB + Case;
• JoSch - 1 assembed device?;
• Philsan - 1 assembled device;
• beamer320i - 1 assembled device;
• gozar - 2 assembled devices;
• Firedawg - 1 assembled device + 2 PCB + 2 Cases;
• akator - 1 assembled device;
• fastofruto - 1 assembled device;
• Witchboard - 1 PCB + 1 Case + 1 pre-programmed ARM (Can add all required components for additional 8$);
• tep392 - 1 assembled device;
• AtariBuff - 1 assembled device;
• Sleepy - 1 assembled device;
• skel28 - 1 assembled device;
• skr - 1 assembled device;

PS: I plan to start assembling at beggining of April after arriving requited components and PCB

[toiletunes]

One assembled unit for me, please.

[thgill]

I would like 2 assembled devices.

[Defender II]

2 assembled for me.

[VicViper]

One fully assembled for me please.

[orpheuswaking]

Fully assembled drive please

 

Is there options for other colors?

[venom4728a]

One Assembled unit for me please..

[jcbstein]

I'm in for 1 assembled unit please.

[olix]

One assembled - if delivery to germany is possible and the cost for postage are not too high.

[alsp]

Is there options for other colors?

 

Which color do you need?

[alsp]

One assembled - if delivery to germany is possible and the cost for postage are not too high.

Delivery price to Germany should be around $7-10.

[Evidious]

One assembled unit for me, please

[jvas]

I would like to have one assembled unit. Thanks!

[twh/f2]

I'm in for one assembled unit. Shipping to germany required. thanks!!

[+SenorRossie]

I'm in for 1 assembled and 1 PCB + Case + pre-programmed ARM + all required components for assembling.

[JoSch]

• JoSch - 1 assembed device?;

Yes, one assembled.

[mckafka99]

I am interested in in one of the fully assembled models. Thanks!

[atarian63]

I would like 2 please fully assembled

Edited February 22, 2017 by atarian63

[Awch]

One fully assembled for delivery to Canada please!

[+Larry]

One -- fully assembled & cased, please (U.S.).

 

-Larry

[orpheuswaking]

 

Which color do you need?

 

Not sure, I was just curious Black, Purple, Grey etc?

 

I would probably change the screws to black also, just for my own aesthetics. As long as I can find some the right size

Edited February 22, 2017 by orpheuswaking

[Brentarian]

 

Not sure, I was just curious Black, Purple, Grey etc?

 

I would probably change the screws to black also, just for my own aesthetics. As long as I can find some the right size

Too dark and you might not be able to see the LEDs shining through.

[+Stephen]

I'll take one of the "PCB + Case + pre-programmed ARM + all required components for assembling" kits please.

[jcbstein]

I'm in for 1 assembled unit please.

I Would like to bump this up to 2 assembled units. Thanks

[Gandor]

2 assembled devices for me please

 

 

Sent from my iPhone using Tapatalk