Jump to content
alsp

SDrive-ARM preorder

Recommended Posts

useful addition: firmware via SD should be great

Share this post


Link to post
Share on other sites

@alsp

when do you require payment?

 

also, my green case is fine to be drilled for LEDs to be visible if it's easier for you

Share this post


Link to post
Share on other sites

I need to remove myself from the list. I wanted you to know so you could move someone else up the list.

 

Bob C

 

Ok, no problem

 

@alsp

when do you require payment?

 

also, my green case is fine to be drilled for LEDs to be visible if it's easier for you

 

Right after device will be assembled and ready to send.

About holes - no problem.

 

PS: I still waiting PCBs delivery.

  • Like 1

Share this post


Link to post
Share on other sites

Hello!
Which colors would have the device available? I mean, it would be XL or XE style?

Would you send a PM informing us its availability or you just will post it?
Thanks from Chile!

Share this post


Link to post
Share on other sites

Which colors would have the device available? I mean, it would be XL or XE style?

Would you send a PM informing us its availability or you just will post it?

Thanks from Chile!

Colors limited only by color of fimament that I have. nowadays its pure white, orange and green,

If you like some other color - you have several posibilities ;)

1) You can send me filament that you need (or just send me money for it and I can buy it in nearest shop),

2) You can take white one and use color spray,

3) You can use models that I've put on github and order case on some online 3D printing service (in this case you will need to combine all parts togeather on your side)

 

When I finally get PCBs from customs (for a while there are issues with it), I'll start producing devices. When your device will be ready I'll write you personal message with link to invoice. When you'll pay - I'll send device to you.

Edited by alsp
  • Like 3

Share this post


Link to post
Share on other sites

One assembled for me, please.

My sincere apologies but I have to cancel my order due to unforeseen problems. I'm sorry for the trouble this is causing you.

 

Kind regards,

Klas

Share this post


Link to post
Share on other sites

Current preorder list:

  • ravard - 1 assembled device + PCB + Case;
  • JoSch - 2 assembed devices;
  • Philsan - 1 assembled device;
  • beamer320i - 1 assembled device;
  • gozar - 2 assembled devices;
  • Firedawg - 1 assembled device + 2 PCB + 2 Cases;
  • akator - 1 assembled device;
  • fastofruto - 1 assembled device;
  • Witchboard - 1 PCB + 1 Case + 1 pre-programmed ARM (Can add all required components for additional 8$);
  • tep392 - 1 assembled device;
  • AtariBuff - 1 assembled device;
  • Sleepy - 1 assembled device;
  • skel28 - 1 assembled device;
  • skr - 1 assembled device;
  • areeve - 1 assembled device;
  • npturton - 1 assembled device;
  • pps - 1 assembled device;
  • SenorRossie - 1 assembled device + 1 full kit for self assembling;
  • rdea6 - 1 assembled device;
  • toiletunes - 1 assembled device;
  • thgill - 2 assembled device;
  • pboland - 1 assembled device;
  • Defender II - 2 assembled device;
  • VicViper - 1 assembled device;
  • orpheuswaking - 1 assembled device;
  • venom4728a - 1 assembled device;
  • jcbstein - 1 assembled device;
  • olix - 1 assembled device;
  • Evidious - 1 assembled device;
  • jvas - 1 assembled device;
  • twh/f2 - 1 assembled device;
  • mckafka99 - 1 assembled device;
  • atarian63 - 2 assembled devices;
  • Awch - 1 assembled device;
  • Stephen - 1 full kit for self assembling
  • jcbstein - 2 assembled devices;
  • Gandor - 2 assembled devices;
  • tuf - 1 assembled device;
  • kazmat - 2 full kits for self assembling
  • brenski - 1 assembled device;
  • Android8675 - 1 assembled device;
  • Poison - 1 assembled device;
  • Atari Nut - 1 assembled device;
  • awesp - 2 assembled devices;
  • Brentarian - 1 assembled device;
  • nikolaisen - 1 assembled device;
  • skywalkeriom - 1 assembled device;
  • mytekcontrols - 1 assembled device;
  • docertabum01 - 1 assembled device;
  • rdemming - 1 assembled device;
  • Fletch - 1 assembled device;
  • pedgarcia - 1 assembled device;
  • Frognum - 1 assembled device;
  • WildBill777 - 1 assembled device;
  • 917k - 1 assembled device;
  • gobo - 1 assembled device;
  • davidcalgary29 - 2 assembled devices;
  • tecci06 - 1 assembled device;
  • ijor - 1 assembled device;
  • fandenivoldsk - 2 assembled devices;
  • pseudografx - 1 assembled device;
  • sloopy - 2 full kits for self assembling
  • uunek - 1 assembled device;
  • gargoyle - 1 full kit for self assembling
  • RodLightning - 1 assembled device;
  • WIZZARD77 - 1 assembled device;
  • slx - 1 assembled device;
  • rkindig - 1 assembled device;
  • mamejay - 1 full kit for self assembling
  • yerzmyey - 1 assembled device;
  • pjbramley - 1 assembled device;
  • Lios - 1 assembled device;
  • xrbrevin - 1 assembled device;
  • waryl - 1 assembled device;
  • Chongo Chile - 2 assembled devices;
  • arctus - 1 assembled device;
  • Bumzyman - 1 assembled device;
PS: Please note - I have temporary issues with customs (parcel with PCBs) - so production of devices is delayed little bit. As soon as I get my parcel from cusoms - I'll write down.
  • Like 5

Share this post


Link to post
Share on other sites

Wow, close to 90 units, you'll have some work to do for sure :-o

You right! a lot of work =)

 

2Everyone: Please help me with unique name for this device in this thread

Share this post


Link to post
Share on other sites

I would like to order 1 assembled unit. Thank you.

 

 

If it's not too late, I would be interested in 1 fully assembled unit too!

 

Ok, you're both in list.

 

2Future device owners: please vote for the new name of SDrive-ARM on this topic.

Share this post


Link to post
Share on other sites

Based on the poll result, new name for this device is SDrive2

MrFish - can receive 50% discount - congratulations! (but it seems he is not in the queue...).

 

Any voluenteer designers here who can help to create stiker for device? Otherwise I'll create it by myself... :grin: but I don't have designer skills ;)

 

PS: Finally I've won WAR with Customs and it seems tommorow or day after tomoorow I'll able to get PCBs from post. Right after it I will be ready to send DIY Kits and start device assembling. So - head of the queue - be prepared =)

  • Like 2

Share this post


Link to post
Share on other sites

Based on the poll result, new name for this device is SDrive2

MrFish - can receive 50% discount - congratulations! (but it seems he is not in the queue...).

 

Cool... I was just having fun coming up with names. I can't really afford one right now (even at a discount), so you can give the discount to Orpheus, since he thought he invented the name too.

 

 

Any voluenteer designers here who can help to create stiker for device? Otherwise I'll create it by myself... :grin: but I don't have designer skills ;)

 

I might be interested in helping with the label too. It depends on what you have in mind. Maybe you can PM me some details.

Share this post


Link to post
Share on other sites

Based on the poll result, new name for this device is SDrive2

MrFish - can receive 50% discount - congratulations! (but it seems he is not in the queue...).

 

Any voluenteer designers here who can help to create stiker for device? Otherwise I'll create it by myself... :grin: but I don't have designer skills ;)

 

PS: Finally I've won WAR with Customs and it seems tommorow or day after tomoorow I'll able to get PCBs from post. Right after it I will be ready to send DIY Kits and start device assembling. So - head of the queue - be prepared =)

 

I was at the hospital or I would have voted for my own suggestion and it would still be a tie. :P

Share this post


Link to post
Share on other sites

Finally I've done it! I've win war with Customs and get everything that needed for device construction.

Moreover, I've already build first 15 devices:

post-22355-0-36818000-1495883780.jpgpost-22355-0-80511300-1495883794.jpg

and some of you already receive PM with request for E-Mail address for PayPal invoice =)

Devices ready to send right after stikers will be done (if some of you would'nt wait for it - just PM me and I send it to you ASAP):

post-22355-0-95930900-1495883910.jpg

So, there are still a lot of work to do:

post-22355-0-52988400-1495883950.jpgpost-22355-0-96643000-1495884009.jpg

And if you still do not receive PM from me, be patient, I plan to work hard for create remaining items.

 

Best regards,

Alexey

Edited by alsp
  • Like 12

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...