aftyde #1 Posted April 2, 2017 Hi All, Was tinkering with my HDX RS-232 card and seem to have blown away the DSR. The machine won't start with the interrupt jumper on - so my question is, what would be the correct process to reload the DSR. Do I need to tinker with this jumper? The only com program I have that works is Zterm80 - and it seems to require the interrupt jumper be on. So what is exactly the process... don't want to fry my one connection to the non-TI world... Cheers, Arthur... Quote Share this post Link to post Share on other sites
Shift838 #2 Posted April 2, 2017 (edited) Hi All, Was tinkering with my HDX RS-232 card and seem to have blown away the DSR. The machine won't start with the interrupt jumper on - so my question is, what would be the correct process to reload the DSR. Do I need to tinker with this jumper? The only com program I have that works is Zterm80 - and it seems to require the interrupt jumper be on. So what is exactly the process... don't want to fry my one connection to the non-TI world... Cheers, Arthur... If I recall you need to remove the jumper to load the DSR. The Jumper is only needed when you are using a terminal program that requires interrupts. Check your battery to go ahead and makes sure it's still good too. Edited April 2, 2017 by Shift838 1 Quote Share this post Link to post Share on other sites
Opry99er #3 Posted April 2, 2017 Just make sure you have the DSR on first and foremost. 1 Quote Share this post Link to post Share on other sites
aftyde #4 Posted April 2, 2017 Got it! You guys rock! Much appreciated... Quote Share this post Link to post Share on other sites
Shift838 #5 Posted April 2, 2017 Got it! You guys rock! Much appreciated... Awesome We Rock! 1 Quote Share this post Link to post Share on other sites
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord