Jump to content
Boojakascha

Problems using Lothark USB floppy drive emulator Rev. D HxC as external FDD

Recommended Posts

Hello

 

I am using an Atari STE 520 with a HxC device called the "USB floppy drive emulator" in revision D made by Lotharek. This is the version which lacks jumper switches, but lets you select the device ID in software. Using this device as a internal floppy drive works acceptable. However I run into problems when I try to use it as an external FDD with a cable made by this guide:

http://www.atari-forum.com/viewtopic.php?t=26656

Sadly the Wiki entry which is mentioned in this guide is broken. All internal jumpers inside my STE are on their default (http://info-coach.fr/atari/hardware/interfaces.php) so pin 5 of the 14 pin connector would try to reach a FDD with ID 1 (rather than 0).

 

The problem is that it won't work for me... The control LED of the HxC device for floppy access just lights up if I set the HxC to DS2 (all normal) or DS1 (with twisted cable). With those configuration I can for example open the floppy folder of "orbital destroyer". The internal FDD does sounds when doing so. If I then start the game the internal FDD continues to make sound, but the external one isn't used.

 

The problem is the same if I cut the cable of (Atari STE-) pin 5 having it floating (Atari STE pin 6 still connected). However cutting 6 while having 5 still connected doesn't work.

 

Does someone of you operate a Atari STE 520 with a Lotharek USB floppy drive emulator as external FDD? Is this possible, or is there a funky bug? Has anybody an idea what I am doing wrong?

 

PS: Of Orbital Destroyer I have the actual 3.5 inch and I am going to put it to SPS tonight =)

 

With kind regards

Ben

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...