Dropcheck Posted June 3, 2017 Share Posted June 3, 2017 Can I get help in collecting a list of compatible drive mechs? I know the part # of the original Mitsumi drive (D305V), but what was the part # of the Chinon drive? Quote Link to comment Share on other sites More sharing options...
Brentarian Posted June 3, 2017 Share Posted June 3, 2017 The 3.5" mech that I use is a Sony MPF920 high density drive. The drive select must be set at 0 (default is 1) so the jumper from DS1 was moved to DS0. Also, the density switch was closed with a jumper to force it to use 720k even with 1.44mb disks. 720k disks work perfectly. I've had some issues with 1.44mb disks if they have been previously formatted at 1.44mb on a PC, but if the disk is new and formatted at 720k on the Atari then they work fine. Older drives have jumpers or dip switches on the back to change the DS#. I have an ALPS drive and could never find DS# anywhere on the PCB, so I gave up on it. I found the Sony when disposing of an old 486 pc at work a few years ago. 1 Quote Link to comment Share on other sites More sharing options...
Dropcheck Posted June 3, 2017 Author Share Posted June 3, 2017 Did you have to use a different data cable? Isn't the 3 1/2" drives using a normal IDC 34 pin connector? Quote Link to comment Share on other sites More sharing options...
Brentarian Posted June 3, 2017 Share Posted June 3, 2017 I used an old edge to IDC adapter. They are hard to find these days. Quote Link to comment Share on other sites More sharing options...
wemichener Posted June 5, 2017 Share Posted June 5, 2017 Are any of the TEAC drives compatible? Quote Link to comment Share on other sites More sharing options...
Dropcheck Posted June 5, 2017 Author Share Posted June 5, 2017 Are any of the TEAC drives compatible? I found this on a old site. Quote Link to comment Share on other sites More sharing options...
tjlazer Posted June 6, 2017 Share Posted June 6, 2017 Epson SMD-300/340 work. Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted June 6, 2017 Share Posted June 6, 2017 (edited) That is exactly the information I was digging up for another thread... good Job drop check! last update to the site was 2016 for security certificates etc etc.... Edited June 6, 2017 by _The Doctor__ Quote Link to comment Share on other sites More sharing options...
1050 Posted June 7, 2017 Share Posted June 7, 2017 I have an unverified list of drives that I saved way back there. But in those times there were often wrong data in such lists, I saved them anyway. Anything from 1.2 meg drives being 360k drives and worse - you are on your own here. The site source has disappeared, but this one was the largest I happened across and maybe the only reason I saved it. Just my opinion but I believe any 3.5 can be made to work, just have to set it's jumper to drive zero. And all 360k 5.25 drives should work also. FD.zip 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.