modifying speech synthesizer?

[Everett1954]

Somewhere in my browsing I came upon a jumper modification for the speech synthesizer. I do not remember where I found it but it was a wire that jumped across the ground or 5 volt to be used for what ever gets plugged into the other side of it (NanoPEB or 32K sidecar?)

 

Does anyone remember what this is for and where to find it again?

 

Thanks

 

 

[Ephesus]

Watch this video. I think this is what you're looking for.

 

Mike

 

 

https://m.youtube.com/watch?v=qaY7_0XbpIE

[Everett1954]

Thanks that was what I had seen, looks like it is for 32K sidecar

[sparkdrummer]

I posted that on here somewhere. I pulled the 5 volts from the speech and wired to a barrel connector to plug into the nanopeb. If I can find it I'll post it. Chris did an article on it in one of his Shift838 newsletters also. You might look for that issue as it explains it real well.

[unhuman]

I posted that on here somewhere. I pulled the 5 volts from the speech and wired to a barrel connector to plug into the nanopeb. If I can find it I'll post it. Chris did an article on it in one of his Shift838 newsletters also. You might look for that issue as it explains it real well.

 

I want this ^^^

[digdugnate]

I saw this- is this close to what you are looking for?

 

http://atariage.com/forums/topic/259662-speech-synthesizer-modifications-audioin-and-5vdc-pass-through/?

[sparkdrummer]

Check out the cf7+ power supply post