Coleco power input pinout ...

[Zxquad]

Hi all,

 

I need your help, I just bought a no working Coleco, the only problem is a missing cable between the working power supply and the coleco,

I fix this but now I need to know where the +5 +12 -5 and the GND are located on the console's pins ....

Could somebody here help me ?

[carlsson]

Take a good look on the label on the power supply, or visit a page like this one: http://www.colecovision.dk/technical.htm

Edited October 25, 2017 by carlsson

[Zxquad]

Mixed both ideas found on FB Colecovision Lunatics! and search a little more on the web http://www.colecovision.dk/technical.htm as you tells me , in fact we have to watch out with the colors. The white and the red are on both the same, but from the PS the yellow is to connect on the blue and the blue to the black on the coleco connector !!!! Now it's just perfect !!!! Thx a lot for your help too Anders ....

[Zonie]

Does this diagram make sense to anyone???

 

From what I can tell here, on the power cord:

 

wht +5

yel -v

red +12

blu gnd

 

???

Edited February 14, 2018 by Zonie

[ten-four]

 

It's a little tricky on the first picture.

 

From CV PAL Power supply:

 

1 White, + 5v.

2 Yellow, - 5v.

3 Red, + 12 v.

4 Blue, Ground/common

 

Power cord from CBS ColecoVision:

 

1 White, + 5v.

2 Blue, - 5v.

3 Red, + 12v.

4 Black, Ground/common