VintageGamer74 Posted November 10, 2018 Share Posted November 10, 2018 Have my Jag set up so I'm hoping they'll be here soon! ??? Quote Link to comment Share on other sites More sharing options...
CD-i Posted November 12, 2018 Share Posted November 12, 2018 Ordered my set. Sorry it took some weeks to get the funds ready. Quote Link to comment Share on other sites More sharing options...
SumerNivek Posted November 13, 2018 Share Posted November 13, 2018 (edited) Starwander, just sent you a PM. I actually just finally got to your email from October 14 today! Yes, been busy. Anyway, please see my PM regarding my pre-order and the question that I pose. Thanks! EDIT: Yes, I am one of the heretics who put his name down and haven't ordered yet. I am hoping to soon to support Starwander! Edited November 13, 2018 by SumerNivek Quote Link to comment Share on other sites More sharing options...
sandroace Posted November 13, 2018 Share Posted November 13, 2018 I too have to put my order in. It's just the timing for me was horrible so I'll still have to wait a couple of weeks before I can fund this but as soon as I can rest assured I will. I'm sorry that I can't at this moment but for now funds are limited. Very soon though hopefully. .Sandro. Quote Link to comment Share on other sites More sharing options...
Gojira_Dude Posted November 15, 2018 Share Posted November 15, 2018 New on the forums and just put in my order Can't wait! Quote Link to comment Share on other sites More sharing options...
LianneJaguar64 Posted November 15, 2018 Share Posted November 15, 2018 I'll be buying mine when I can afford them xD Quote Link to comment Share on other sites More sharing options...
Gummy Bear Posted November 15, 2018 Share Posted November 15, 2018 New on the forums and just put in my order Can't wait! Welcome, dude Quote Link to comment Share on other sites More sharing options...
+Starwander Posted November 15, 2018 Author Share Posted November 15, 2018 Starwander, just sent you a PM. I actually just finally got to your email from October 14 today! Yes, been busy. Anyway, please see my PM regarding my pre-order and the question that I pose. Thanks! EDIT: Yes, I am one of the heretics who put his name down and haven't ordered yet. I am hoping to soon to support Starwander! Got your message, thank you 1 Quote Link to comment Share on other sites More sharing options...
+Starwander Posted November 15, 2018 Author Share Posted November 15, 2018 I too have to put my order in. It's just the timing for me was horrible so I'll still have to wait a couple of weeks before I can fund this but as soon as I can rest assured I will. I'm sorry that I can't at this moment but for now funds are limited. Very soon though hopefully. .Sandro. Sounds good Quote Link to comment Share on other sites More sharing options...
+Starwander Posted November 15, 2018 Author Share Posted November 15, 2018 Controllers are arriving tomorrow 1ZV90Y440344198957 8 Quote Link to comment Share on other sites More sharing options...
Swami Posted November 15, 2018 Share Posted November 15, 2018 Controllers are arriving tomorrow 1ZV90Y440344198957 Anyone know if there is a good PC adapter for the six button controller? The raphnet one says it supports 17 buttons, which leaves you three short. I'm not sure what this means on the 2600-daptor page, but sounds promising: "For custom controllers - supports the X & Y analog inputs, and 3 extra buttons/controller type." http://www.2600-daptor.com/Jaguar-daptor.htm Quote Link to comment Share on other sites More sharing options...
Machine Posted November 15, 2018 Share Posted November 15, 2018 Controllers are arriving tomorrow 1ZV90Y440344198957 "It's beginning to look a lot like Christmas!" 3 Quote Link to comment Share on other sites More sharing options...
dualcam Posted November 15, 2018 Share Posted November 15, 2018 Anyone know if there is a good PC adapter for the six button controller? The raphnet one says it supports 17 buttons, which leaves you three short. I'm not sure what this means on the 2600-daptor page, but sounds promising: "For custom controllers - supports the X & Y analog inputs, and 3 extra buttons/controller type." http://www.2600-daptor.com/Jaguar-daptor.htm The 3 added buttons on the Pro controller are duplicates of 3 keypad buttons. My comment of 3 extra buttons is the controller is wired as a 6x4 row/column matrix in which there are 3 empty positions were a button could be. Tom http://2600-daptor.com/ 1 Quote Link to comment Share on other sites More sharing options...
Swami Posted November 15, 2018 Share Posted November 15, 2018 The 3 added buttons on the Pro controller are duplicates of 3 keypad buttons. My comment of 3 extra buttons is the controller is wired as a 6x4 row/column matrix in which there are 3 empty positions were a button could be. Tom http://2600-daptor.com/ So the Jaguar-dapter will support both a jaguar pro controller and the jaguar rotary controller (analog) pad? Quote Link to comment Share on other sites More sharing options...
dualcam Posted November 15, 2018 Share Posted November 15, 2018 So the Jaguar-dapter will support both a jaguar pro controller and the jaguar rotary controller (analog) pad? Analog? Didn't know there was actually any analog controllers for the Jaguar. Rotary controllers I have seen are digital and replace the D-pad. The Jaguar console supports 2 analog inputs on the controller jack, and I did the same on the my Jaguar-daptor and they show as Rx and Ry axis. But I'd like to learn more about any analog controller before saying it is supported. The Pro controller is the same as the regular controller as far as the interface. The 3 added buttons on the Pro are wired to the keypad (IIRC) 4/5/6 . Tom http://2600-daptor.com/ Quote Link to comment Share on other sites More sharing options...
Swami Posted November 15, 2018 Share Posted November 15, 2018 Analog? Didn't know there was actually any analog controllers for the Jaguar. Rotary controllers I have seen are digital and replace the D-pad. The Jaguar console supports 2 analog inputs on the controller jack, and I did the same on the my Jaguar-daptor and they show as Rx and Ry axis. But I'd like to learn more about any analog controller before saying it is supported. Okay. I think those are homemade ones made to support homebrews with analog support like Minter's Tempest 2000. I don't have anything like this, though. Just inquiring about what was intended. Thanks. Quote Link to comment Share on other sites More sharing options...
leech Posted November 15, 2018 Share Posted November 15, 2018 Starwander, just sent you a PM. I actually just finally got to your email from October 14 today! Yes, been busy. Anyway, please see my PM regarding my pre-order and the question that I pose. Thanks! EDIT: Yes, I am one of the heretics who put his name down and haven't ordered yet. I am hoping to soon to support Starwander! Heretic! We must put you in the comfy chair and poke you with the soft cushions! Quote Link to comment Share on other sites More sharing options...
leech Posted November 16, 2018 Share Posted November 16, 2018 Anyone know if there is a good PC adapter for the six button controller? The raphnet one says it supports 17 buttons, which leaves you three short. I'm not sure what this means on the 2600-daptor page, but sounds promising: "For custom controllers - supports the X & Y analog inputs, and 3 extra buttons/controller type." http://www.2600-daptor.com/Jaguar-daptor.htm I have the raphnet adapter, pretty sure the pro controller works fine with it. Quote Link to comment Share on other sites More sharing options...
leech Posted November 16, 2018 Share Posted November 16, 2018 (edited) I can confirm with the original Pro controller, all buttons are working with Raphnet. the upper buttons Z X Y, are mapped to the same buttons as 7 8 9 on the keypad. Shoulder buttons are mapped to Left - > 4 and Right -> 6. Edit: Tested through Linux. Edited November 16, 2018 by leech Quote Link to comment Share on other sites More sharing options...
+LS650 Posted November 16, 2018 Share Posted November 16, 2018 Out for Delivery Scheduled Delivery Friday11/16/2018 Estimated Time by End of Day Quote Link to comment Share on other sites More sharing options...
VintageGamer74 Posted November 17, 2018 Share Posted November 17, 2018 Mine were shipped today!!! Thanks, Starwander!!! ??? Quote Link to comment Share on other sites More sharing options...
+poobah Posted November 17, 2018 Share Posted November 17, 2018 "Your order is on the way" WOOHOO!!! :D :D Quote Link to comment Share on other sites More sharing options...
+Starwander Posted November 17, 2018 Author Share Posted November 17, 2018 Mine were shipped today!!! Thanks, Starwander!!! Your welcome I hope you like them. Quote Link to comment Share on other sites More sharing options...
+Starwander Posted November 17, 2018 Author Share Posted November 17, 2018 "Your order is on the way" WOOHOO!!! :D :D Your welcome I hope you like them. Quote Link to comment Share on other sites More sharing options...
+Starwander Posted November 17, 2018 Author Share Posted November 17, 2018 UPS driver only dropped off 4 of the 10 boxes today so I was not able to process everyone's order. I packaged orders 1001 through 1097 today and will have them in the mail tomorrow. You should get two emails one from Stamps.com with the tracking number and one from Shopify indicating your order has shipped. Should get another batch of boxes in on Monday and will try to get as many done that day as possible. Thank you for your patience. 7 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.