craggus2000 Posted December 19, 2017 Share Posted December 19, 2017 Hi all, This is my first post here, but been lurking and taking in all the useful advice re atari! I'm looking for one of the black plastic controller ports thats soldered on to the pcb of an atari flashback 3-7. Can anyone help me please? I currently have one good and one melted one, that I accidently destroyed whilst trying to remove for a raspberry pi project. Any help greatly appreciated! Quote Link to comment Share on other sites More sharing options...
craggus2000 Posted December 23, 2017 Author Share Posted December 23, 2017 Bump Quote Link to comment Share on other sites More sharing options...
masschamber Posted December 24, 2017 Share Posted December 24, 2017 arent they just normal db9 ports? Quote Link to comment Share on other sites More sharing options...
SignGuy81 Posted December 24, 2017 Share Posted December 24, 2017 arent they just normal db9 ports? I haven't opened a flashback model 3-7 but there are different ones in general. I have long ones and short ones. The atari 2600 takes the longer style, not sure what those flashback models take. I have each but I have the metal type. I did just recently finish a sega flashback mod in which I used the ports off the Genesis 3 so I no longer need the two plastic ports off the flashback, which are the shorter ones. So if you need the shorter ones I have the plastic ones. I may have plastic longer ones(atari 2600 style) but I'd have to check. I'm gonna try to do an image search to determine which ones they take. Quote Link to comment Share on other sites More sharing options...
SignGuy81 Posted December 24, 2017 Share Posted December 24, 2017 Just got done doing an image search. The casing looks different from the 2600 and the Atari Flashback 2 which is the longer style but the length as far as I can tell looks about so it may work. I don't have any plastic ones however. Here is the difference Atari flashback 2 same as 2600 type And here is the flashback 3 It is kinda hard to tell by the pic but it looks like other than different design they also may be longer. Quote Link to comment Share on other sites More sharing options...
craggus2000 Posted December 25, 2017 Author Share Posted December 25, 2017 Yes it's definitely the flashback 3 version ports I am after. I think they are the same in 3 - 7. Quote Link to comment Share on other sites More sharing options...
SignGuy81 Posted December 26, 2017 Share Posted December 26, 2017 with the board upside down can you measure from the back pins to the front of the port the edge of the plastic? Quote Link to comment Share on other sites More sharing options...
craggus2000 Posted January 1, 2018 Author Share Posted January 1, 2018 Sorry for the delay, now xmas is over, length from back of pins to front plastic of port looks to be 24mm... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.