phaeron Posted July 17, 2018 Author Share Posted July 17, 2018 Regular execution history is limited to 128K instructions. The performance analyzer tracer can buffer more and will allow searching within a window of 400K instructions within the trace. Another option is the heat map (hme, etc.). It tracks read and write accesses to addresses and can tell you the 'source' of the current value stored at an address. Using "r; g" as the condition can cause stepping to run away due to resuming execution when the breakpoint hits. Using the -n option to the bx command with just "r" as the breakpoint action is better as that sets a non-stopping breakpoint. Current test versions also have bta command that makes this easier; it is the memory access version of the tracepoint (bt) command. 2 Quote Link to comment Share on other sites More sharing options...
phaeron Posted July 18, 2018 Author Share Posted July 18, 2018 http://www.virtualdub.org/beta/Altirra-3.10-test34.zip http://www.virtualdub.org/beta/Altirra-3.10-test34-src.zip Fixed a regression that caused a hang when resetting input maps to default. Fixed a bug in Fast Boot that sometimes caused a few bytes in memory to not be cleared, breaking a couple of programs. 9 Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted July 19, 2018 Share Posted July 19, 2018 i need to ship a standalone Altirra with my next release. Where can I see the ".ini" file? In a perfect world I would like to configure to the desired settings, copy/paste Altirra and .ini file and bundle it with my demo. Jac did it with his SillyPack. Or do I have to manually edit that ini file? another option would be save state file? but a file with ini-segments ($2e2) does not stop altirra (break at run adress) as its not $2e0... ideas/help? Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted July 19, 2018 Share Posted July 19, 2018 (edited) The easiest way would be to make a folder with ALtirra and its needed OS roms (unless its works ok under Avery's internal bios) in the main dir, then run it with a /portable command line..(If you don't use the command line initially it will use the registry settings it has stored (if any)) Then setup the release as you want it and altirra to do out with all the settings done, close altirra and there it is..A stand alone version of Altirra with its own special ini for your release.. And that way your own Altirra if its using the registry is untouched.. Paul.. (Sorry about the hand held look of the post Heaven, its just incase anyone else wants to have an Altirra with an ini file to do something special away from their own Altirra settings) Methinks you are able to use basic and the like Lol...Sorry...Looking forward to the new release... Edited July 19, 2018 by Mclaneinc 1 Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted July 19, 2018 Share Posted July 19, 2018 Thx Paul, sounds good. will try later today. just want to make sure that it works "out of the box" for ppl without any Altirra knowledge. So your way could be perfect. I let you know. Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted July 19, 2018 Share Posted July 19, 2018 Should be fine, If it needs IDE stuff etc just stuff the roms in with altirra and do a firmware scan before you shut it down so they are known to the setup, as long as its all self contained in that folder it should be fully transportable.. Have fun Paul.. 1 Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted July 19, 2018 Share Posted July 19, 2018 works flawless... thx. 1 Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted July 19, 2018 Share Posted July 19, 2018 Glad to help... Quote Link to comment Share on other sites More sharing options...
R0ger Posted July 19, 2018 Share Posted July 19, 2018 What !? You can do THAT ? I've been pulling my hairs over settings in registry for years ! 1 Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted July 19, 2018 Share Posted July 19, 2018 Sorry ROger, you only had to ask 2 Quote Link to comment Share on other sites More sharing options...
Roydea6 Posted July 25, 2018 Share Posted July 25, 2018 AltirraCrash.zip I am trying to mount folders as virtual SpartaDos Disk. Quote Link to comment Share on other sites More sharing options...
phaeron Posted July 26, 2018 Author Share Posted July 26, 2018 Fixed: http://www.virtualdub.org/beta/Altirra-3.10-test35.zip http://www.virtualdub.org/beta/Altirra-3.10-test35-src.zip 8 Quote Link to comment Share on other sites More sharing options...
mr_gw454 Posted July 27, 2018 Share Posted July 27, 2018 Phaeron -- thanks for all the updates. This is a fantastic emulator! A bonus is that it runs extremely well in wine 3.x in Linux. 1 Quote Link to comment Share on other sites More sharing options...
phaeron Posted August 5, 2018 Author Share Posted August 5, 2018 Release candidate: http://www.virtualdub.org/beta/Altirra-3.10-test36.zip http://www.virtualdub.org/beta/Altirra-3.10-test36-src.zip Fixed a few regressions in disk drive debugging: issues with intermittent stepping and not being able to set PC, and 8048 R0/R1 registers being reported incorrectly in history. 9 Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted August 6, 2018 Share Posted August 6, 2018 (edited) Another milestone in completeness... 2600 emulation? Lol...Just joking, I know that's a whole different ball game... Regarding Altirra, to quote Paulie from Rocky III (1982 Sylvester Stallone film) when looking at the newly put up Rocky statue by the city, he looks at it and says "Its a thing of beauty"....That's Altirra Edited August 6, 2018 by Mclaneinc Quote Link to comment Share on other sites More sharing options...
massiverobot Posted August 6, 2018 Share Posted August 6, 2018 I downloaded and ran Altirra yesterday for the first time... I use OSX and have run atari800 for years. Yes, I'm used to no sound, I don't run it for everything. But I did shed a small tear- Altirra is so nice and has so many features. I cried because there isn't something like this for OSX (yet..?) It would be nice to have a master config file generated that could be edited (to cut down on too much UI clicking to setup a working profile) but the features and the setup.... nice job. Thanks for building this amazing software. The first time I had it booting with the U1M BIOS after just 5min of fiddling I was speechless! 2 Quote Link to comment Share on other sites More sharing options...
+DrVenkman Posted August 6, 2018 Share Posted August 6, 2018 Another milestone in completeness... 2600 emulation? Stella is already pretty damn good. Check out the current v5 releases. 3 Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted August 6, 2018 Share Posted August 6, 2018 I downloaded and ran Altirra yesterday for the first time... I use OSX and have run atari800 for years. Yes, I'm used to no sound, I don't run it for everything. But I did shed a small tear- Altirra is so nice and has so many features. I cried because there isn't something like this for OSX (yet..?) It would be nice to have a master config file generated that could be edited (to cut down on too much UI clicking to setup a working profile) but the features and the setup.... nice job. Thanks for building this amazing software. The first time I had it booting with the U1M BIOS after just 5min of fiddling I was speechless! If you run it via command line with a /portable switch at the end you will get the cfg / ini file you want, it will then use that until you delete it and then it will go back to using the registry.. 2 Quote Link to comment Share on other sites More sharing options...
fujidude Posted September 29, 2018 Share Posted September 29, 2018 If you run it via command line with a /portable switch at the end you will get the cfg / ini file you want, it will then use that until you delete it and then it will go back to using the registry.. Yep there is that and it's great. But also within a "single" Altirra configuration you can have endless setups and easily choose between them from within Altirra itself too. Quote Link to comment Share on other sites More sharing options...
Heaven/TQA Posted October 2, 2018 Share Posted October 2, 2018 To Avery: thanks to my Turbo Freezer debugger I might found another VBXE emu bug. In XDL Altirra interprets x3 as wide screen while real hw switched back to narrow wide. Real hw 0 narrow 1 normal 2 wide And 3 is narrow again while 3 Altirra remains in wide. Core 1.26. Havent checked core 1.24. 1 Quote Link to comment Share on other sites More sharing options...
Mclaneinc Posted October 2, 2018 Share Posted October 2, 2018 Yep there is that and it's great. But also within a "single" Altirra configuration you can have endless setups and easily choose between them from within Altirra itself too. Indeed, that was just for someone doing stuff by command line only to be easy.....The profile system on Altirra is great, could do with a spruce up which have been mentioned in the past (so no repeat requests)... Paul. Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted October 2, 2018 Share Posted October 2, 2018 I downloaded and ran Altirra yesterday for the first time... I use OSX and have run atari800 for years. Yes, I'm used to no sound, I don't run it for everything. But I did shed a small tear- Altirra is so nice and has so many features. I cried because there isn't something like this for OSX (yet..?) It would be nice to have a master config file generated that could be edited (to cut down on too much UI clicking to setup a working profile) but the features and the setup.... nice job. Thanks for building this amazing software. The first time I had it booting with the U1M BIOS after just 5min of fiddling I was speechless! I always think warp and OS 'X' as something other than apple os ten (X) No tears, I eat apples... Quote Link to comment Share on other sites More sharing options...
phaeron Posted October 3, 2018 Author Share Posted October 3, 2018 To Avery: thanks to my Turbo Freezer debugger I might found another VBXE emu bug. In XDL Altirra interprets x3 as wide screen while real hw switched back to narrow wide. Real hw 0 narrow 1 normal 2 wide And 3 is narrow again while 3 Altirra remains in wide. Core 1.26. Havent checked core 1.24. Yes, confirmed from the VHDL, I'll fix it for 3.20. 3 Quote Link to comment Share on other sites More sharing options...
pajero_pn Posted October 7, 2018 Share Posted October 7, 2018 Altirra Command-Line Usage: Altirra [switches] <disk/cassette/cartridge images...> Please add a switch to indicate to the debugger the source code: /source <txt.asm> Quote Link to comment Share on other sites More sharing options...
phaeron Posted October 7, 2018 Author Share Posted October 7, 2018 Altirra Command-Line Usage: Altirra [switches] <disk/cassette/cartridge images...> Please add a switch to indicate to the debugger the source code: /source <txt.asm> I'm not sure what this would do...? The debugger has source code support so it can map between addresses and source code lines. If it doesn't already know the source file, it won't know any line mappings either and this switch won't fix that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.