My build of a cheap & great looking, no solder, C64 PSU

[Starglider01]

Hi guys, here it is! The video where I attempt to build a cheap, easy, no solder, SEXY, Commodore 64 replacement power supply. I've been excited to share this with my friends here at AtariAge. Please feel free to like, subscribe, and share. Let me know what you think in the YouTube comments. I hope you enjoy it!

https://youtu.be/UCdXV0X6wEY

 

Thanks!, Starglider

️ http://youtube.com/perifractic

️ http://patreon.com/perifractic

[SignGuy81]

15:00 in video. You have the proper tool to crimp those on the table and instead using lineman pliers. The wire strippers you had on the table would have been perfect they were designed for crimping those.

[+OLD CS1]

Do you have a web site which describes your project? I tried to watch it but I could not get beyond your introduction, monologue, and commentary, even at double-speed. (Nothing against your style of video; I cannot watch television shows like that, either.)

[towmater]

Very nice, though the first notch is so far off-center I could hear Monk screaming from his TV grave.

[Starglider01]

Do you have a web site which describes your project? I tried to watch it but I could not get beyond your introduction, monologue, and commentary, even at double-speed. (Nothing against your style of video; I cannot watch television shows like that, either.)

I don't I'm afraid. There's a fast forward scrub bar under YouTube to just skip to the build.

 

Thanks!, Starglider aka ԹҽɾíƒɾɑϲԵíϲ's RҽԵɾ๏ RҽϲíԹҽs

️ http://youtube.com/perifractic

️ http://patreon.com/perifractic

[Starglider01]

Very nice, though the first notch is so far off-center I could hear Monk screaming from his TV grave.

It is? I'm a perfectionist and I can't tell. Maybe it was the shooting angle. Or maybe I tidied it up later or it got hidden by the rubber grommet. Either way Monk would like it now.

 

Thanks!, Starglider aka ԹҽɾíƒɾɑϲԵíϲ's RҽԵɾ๏ RҽϲíԹҽs

️ http://youtube.com/perifractic

️ http://patreon.com/perifractic