jrhodes Posted August 2, 2020 Share Posted August 2, 2020 Isn't that only testing the 32k, not sams? I have dsk of AMSTEST4 too. Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 2, 2020 Share Posted August 2, 2020 No it will test all cards if you are running the latestSent from my LM-V600 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
jrhodes Posted August 2, 2020 Share Posted August 2, 2020 (edited) Downloaded it from matts download page, going to try it now. It says its v 1.3 , i am not running the burn in test. So far so good. ... " Pass >0001" ... "all 32k passed" Edited August 2, 2020 by jrhodes Quote Link to comment Share on other sites More sharing options...
jrhodes Posted August 2, 2020 Share Posted August 2, 2020 (edited) Going to re-open up the tipi & memory enclosure, have a look around.... Edited August 2, 2020 by jrhodes Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 2, 2020 Share Posted August 2, 2020 Downloaded it from matts download page, going to try it now. It says its v 1.3 , i am not running the burn in test. So far so good. ... " Pass >0001" ... "all 32k passed"So if it doesn't say Sams detected there's an issue with the console connectorSent from my LM-V600 using Tapatalk Quote Link to comment Share on other sites More sharing options...
jrhodes Posted August 2, 2020 Share Posted August 2, 2020 Hmmm. Took the speech off, took off the sams and tipi sidecar, opened it up, nothing looks out of place there. Put it all back together. CALL TIPI from RXB works ok now. So does RUN TIPI"..." and OLD TIPI. Loose connection i guess. (?) The memtest definitely does not say anything about sams detected. From RXB, i can do CALL AMSINIT and SIZE, it shows the expected results. Have not tried running anything sams specific like "in the dark" yet though. Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 2, 2020 Share Posted August 2, 2020 1.5Sent from my LM-V600 using Tapatalk Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 2, 2020 Share Posted August 2, 2020 Sounds like you had a wonky connection that you fixed thoSent from my LM-V600 using Tapatalk Quote Link to comment Share on other sites More sharing options...
jrhodes Posted August 2, 2020 Share Posted August 2, 2020 Just tried the disk version of the megademo and picked 512k version, its working. Where did you get the v1.5 memtest? The one on https://www.jedimatt42.com/downloads/32kexptest.zip Only seems to be v1.3 1 Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted August 2, 2020 Share Posted August 2, 2020 Just tried the disk version of the megademo and picked 512k version, its working. Where did you get the v1.5 memtest? The one on https://www.jedimatt42.com/downloads/32kexptest.zip Only seems to be v1.3https://github.com/jedimatt42/ti994a-32kmemtestSent from my LM-V600 using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
jrhodes Posted August 2, 2020 Share Posted August 2, 2020 OK, now it shows sams detected ? 1 Quote Link to comment Share on other sites More sharing options...
+jedimatt42 Posted August 2, 2020 Author Share Posted August 2, 2020 1 hour ago, jrhodes said: Just tried the disk version of the megademo and picked 512k version, its working. Where did you get the v1.5 memtest? The one on https://www.jedimatt42.com/downloads/32kexptest.zip Only seems to be v1.3 Oops, I should fix that link... Does the megademo run from TIPI? That would be good news, it didn't last time I tried it. Quote Link to comment Share on other sites More sharing options...
jrhodes Posted August 2, 2020 Share Posted August 2, 2020 (edited) 47 minutes ago, jedimatt42 said: Oops, I should fix that link... Does the megademo run from TIPI? That would be good news, it didn't last time I tried it. Yes, tipi + sidecar sams + disk based megademo = sams version worked. Did not let the whole thing run, but it booted. Watched the first minute or so before i killed it and went back to XB. Edited August 2, 2020 by jrhodes 1 Quote Link to comment Share on other sites More sharing options...
globeron Posted August 27, 2020 Share Posted August 27, 2020 Last time I updated to the new image (buster) on RPI 3B+ (I think I turned it 1x off without proper shutdown). now I cannot do CALL TIPI. (TIPI is on >1000) * but I can reach it via Wi-Fi and can see the files and directories, (and I can ssh into it) * tipi.log does not exist (I now created a tipi.log file) * but get all these errors * "settings" and "RPI configuration" does not do anything * "about" does not work * daemon shows errors TIPI-About.docx TIPI-Daemon.docx Is there a way to fix this (or completely re-image and drag and drop the files again?) 1 Quote Link to comment Share on other sites More sharing options...
wolhess Posted August 27, 2020 Share Posted August 27, 2020 Hi Globeron, in such cases I always created a fresh SD card. Everything else just brings strange problems. Hope you are doing well. Wolfgang Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted August 27, 2020 Share Posted August 27, 2020 Quick question: How do I set up backspace in telnet? Quote Link to comment Share on other sites More sharing options...
wolhess Posted August 27, 2020 Share Posted August 27, 2020 3 minutes ago, Vorticon said: Quick question: Do I set up backspace in telnet? Hi Vorticon, in the tipi Telnet the backspace is working without any configuration. If I use the PC Telnet client also, but in putty I configured Backspace to ctrl+H. Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted August 27, 2020 Share Posted August 27, 2020 1 minute ago, wolhess said: Hi Vorticon, in the tipi Telnet the backspace is working without any configuration. If I use the PC Telnet client also, but in putty I configured Backspace to ctrl+H. Do you use FCTN-9 or the back arrow? Quote Link to comment Share on other sites More sharing options...
wolhess Posted August 27, 2020 Share Posted August 27, 2020 On the PC I use the back arrow or Backspace key. Quote Link to comment Share on other sites More sharing options...
globeron Posted August 27, 2020 Share Posted August 27, 2020 17 minutes ago, wolhess said: Hi Globeron, in such cases I always created a fresh SD card. Everything else just brings strange problems. Hope you are doing well. Wolfgang Hi Wolfgang! Good to hear from you! I will try to create a fresh SD card in that case, I thought there was maybe an easy script to use. (I still have my other SD-card of the older Raspbian version 1.6x ). Quote Link to comment Share on other sites More sharing options...
wolhess Posted August 27, 2020 Share Posted August 27, 2020 Today I had some problems with my BBS system to write a message. After I made a fresh SD card and copied all the files back the BBS works fine also with long messages. The problems comes only when I had a power loss without doing a shutdown. Quote Link to comment Share on other sites More sharing options...
+Vorticon Posted August 27, 2020 Share Posted August 27, 2020 23 minutes ago, wolhess said: On the PC I use the back arrow or Backspace key. I meant on the TI itself Quote Link to comment Share on other sites More sharing options...
wolhess Posted August 27, 2020 Share Posted August 27, 2020 10 minutes ago, Vorticon said: I meant on the TI itself on the Ti I use only the back arrow FCTN+S. Quote Link to comment Share on other sites More sharing options...
wolhess Posted August 27, 2020 Share Posted August 27, 2020 But ctrl+H works too. Quote Link to comment Share on other sites More sharing options...
GDMike Posted August 27, 2020 Share Posted August 27, 2020 What I made sure of was this. Prepare a good backup/restore strategy. My ti- on TIpi, docs file structure are backed up daily to my windows share backup folders. Then onto tape, yup an LTO tape daily, along with other data. After you design a bootable SD card for TIpi rasberry pi, make sure to backup a good dated copy. You should be back to operation within an hour of any crash, unless a hardware fault exists. 1 Quote Link to comment Share on other sites More sharing options...
Like us on Facebook
Follow us on Twitter
AtariAge on Instagram
Watch us on YouTube
Chat on Discord
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.