Omega-TI Posted January 22, 2020 Author Share Posted January 22, 2020 5 minutes ago, arcadeshopper said: Magnets and disks and crts oh my Sent from my LM-G820 using Tapatalk Yeah, that could be an issue for some people, but if you use a modern monitor and no longer use diskettes, I cannot see much of a problem. 1 Quote Link to comment Share on other sites More sharing options...
GDMike Posted January 22, 2020 Share Posted January 22, 2020 You can't Sand it and paint Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 23, 2020 Share Posted January 23, 2020 I think the pegs will work great. Slight revision on peg locations as I print parts. Test part released from bed slightly while printing (lifted corner), but was good test for new features otherwise. With the foam strips on the inside I am gonna have to be "clever" in how I make the actual retainer clip things though. Some will have to be multi-peg. 1 Quote Link to comment Share on other sites More sharing options...
Mehridian Sanders Posted January 23, 2020 Share Posted January 23, 2020 Yeah, that could be an issue for some people, but if you use a modern monitor and no longer use diskettes, I cannot see much of a problem.And I just got some Maxell SSSD disks... le sigh.Sent from my SM-G955U using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 24, 2020 Share Posted January 24, 2020 *grumbly noises* After a rather spectacularly failed print today, (like, totally let loose, with black blobs and spaghetti everywhere), I went into hardcore fault checking mode. Found that my heated bed was not reliably heating/staying heated, due to the connector having gotten too hot in the past, and the plastic melting. I have ghetto-ized a "really, this is a terrible idea" fix, and also ordered a replacement cable from amazon. (The ghetto "fix" is only until the new cable arrives.) Also ordered a suitable borosilicate glass top for the bed. (Meant for a REAL i3, but the dimensions are identical. I fail to see why it wont work.) I have been fighting a slight warp in my aluminum bed that should be resolved nicely by the glass topper. I am running the part that failed again, with the ghetto fix in place. See if that really was the cause of all my sorrow. 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted January 25, 2020 Author Share Posted January 25, 2020 1 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 25, 2020 Share Posted January 25, 2020 (several hours of printing later) Yup. Bed still nice and warm at 60C, part has not detached, print quality is nice. That connector to my bed was clearly the cause of my sorrows. I will replaced it properly once said replacement arrives. Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 25, 2020 Share Posted January 25, 2020 Home from work now. Part printed absolutely perfectly with no warping, nor any other print artifacts. (While I was in fault-finding mode, I lubed the shit out of all the linear bearings, verified good action of all belts, lubed the Z-axis screw gears, and- since I had to remove the bed to fully examine it-- did a full manual re-calibration after re-installation.) Clearly the malfunctioning bed power connector has been my major issue. Very pleased now. Will continue printing the series. The part was the second of the 8 part set, and is adjacent to the first one. Peg layout was sufficiently exact for the parts to mate up and fully set down on the metal component, and remain straight with the edge. Things are looking good so far. Once I have the whole series printed (and thus fully fit-tested), I will release the updated set. 1 Quote Link to comment Share on other sites More sharing options...
+Schmitzi Posted January 25, 2020 Share Posted January 25, 2020 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 25, 2020 Share Posted January 25, 2020 Better than hearing a meow... ? 2 Quote Link to comment Share on other sites More sharing options...
xabin Posted January 26, 2020 Share Posted January 26, 2020 On 1/19/2020 at 6:30 AM, digdugnate said: Some of us HAVE played other games and systems, you know, but YOU GOTTA GO FAST. lol Speaking of, sorry for the rant: News breaks of critics liking the Sonic Movie premiere, and a blogger on one of the more famous Sega-themed news sites starts hating on it, because he wants the movie to fail. Insert pic of a Swatbot hammering a "No Fun Allowed" sign into the ground. Ah, well, I have bigger game problems to focus on, like whether or not I should practice Doom 64 on a TC or Emulator, first, before the official PC release comes out... Quote Link to comment Share on other sites More sharing options...
xabin Posted January 26, 2020 Share Posted January 26, 2020 On a totally different tangent, my boyfriend, during his most recent trek into town for Pokemon Go, found a setup for a game of Sapo, which is a pub game we never heard of, before. Anyone familiar with it? Quote Link to comment Share on other sites More sharing options...
adamchevy Posted January 28, 2020 Share Posted January 28, 2020 Me and my wife had a small argument today. She said I was number one, and I said she was number one. Now we are undecided and slightly annoyed at each other. 1 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 28, 2020 Share Posted January 28, 2020 Unhappy. When installing the new glass bed topper, I bumped the connector (tight space) on my heated bed, and lifted the solder traces. It's slightly smaller than a true i3 bed (213x213mm, not 220x220). SOOOO I ordered aftermarket Y axis sled for real i3 (which has slotted linear bearing holes, so should fit existing bearing sleds), and an aftermarket bed for a real i3. 37$. Parts arrive the 30th 1 Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 31, 2020 Share Posted January 31, 2020 This is getting out of hand. Package says "Delivered, at front porch" NO PACKAGE IS THERE. Who's cheerios did I shit in at UPS? Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 31, 2020 Share Posted January 31, 2020 Porch pirates? Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 31, 2020 Share Posted January 31, 2020 They REALLY want to steal a package they probably wont know how to use? Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 31, 2020 Share Posted January 31, 2020 I rest my case. . . 1 2 Quote Link to comment Share on other sites More sharing options...
+mizapf Posted January 31, 2020 Share Posted January 31, 2020 Anyone seen some snow? I guess I'll have to change my avatar again; we're having +15°C right now. This is typically April's temperature (and warmer than August on Iceland, as I got to know). In whole January there were only a couple of days where we got close to the freezing point. I cannot remember a similarly warm January, actually... Quote Link to comment Share on other sites More sharing options...
wierd_w Posted January 31, 2020 Share Posted January 31, 2020 snowed yesterday. all melted now. Quote Link to comment Share on other sites More sharing options...
GDMike Posted January 31, 2020 Share Posted January 31, 2020 There's only like 12 99'er magazines in the WHTECH mags folder...Does ANYONE have all or most in zip archive yet? Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 31, 2020 Share Posted January 31, 2020 Look in the IUC website database. Ciro has been scanning a lot of then in over the last few months. 2 Quote Link to comment Share on other sites More sharing options...
GDMike Posted January 31, 2020 Share Posted January 31, 2020 2 minutes ago, Ksarul said: Look in the IUC website database. Ciro has been scanning a lot of then in over the last few months. ok, i dont know that site.. forgive me... Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted January 31, 2020 Share Posted January 31, 2020 1 minute ago, GDMike said: ok, i dont know that site.. forgive me... Here you go. . . Quote Link to comment Share on other sites More sharing options...
+chue Posted January 31, 2020 Share Posted January 31, 2020 2 hours ago, GDMike said: There's only like 12 99'er magazines in the WHTECH mags folder...Does ANYONE have all or most in zip archive yet? There’s some on archive.org too: https://archive.org/search.php?query=subject%3A"99'er" Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.