+OLD CS1 Posted May 20, 2018 Share Posted May 20, 2018 (Special thanks to @Omega-TI for keeping these updated) "Images for FlashROM 99 (FR99) and FinalGROM 99 (FG99)" thread Cartridge binaries compatible with each or both the FR99 and FG99 "ROM burning images" thread Cartridge and other images for burning your own cartridges and ROMs "Manuals, keyboard strips, labels, and much more" thread Scans and re-makes of various manuals, keyboard strips, etc., as well as printable 3D objects 5 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted August 26, 2018 Share Posted August 26, 2018 I started a PROGRAMMING AIDS heading in the Keyboard strips, cards, manuals, 3d objects and more entry. I can't believe I overlooked those items for inclusion in the past. There may be a good chance that I overlooked something else too. Please check the section out, if you notice something I missed, please let me know and I'll include it to make someones future search a little easier. Thanks. 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted February 10, 2019 Share Posted February 10, 2019 If you guys want to print up your own manual/booklet, "ADOBE ACROBAT READER DC" is THE program to use. Check out my video below to see how I make mine. I used Vorticon's new manual as my example. https://www.youtube.com/watch?v=vLEMvUksB74&feature=youtu.be 5 Quote Link to comment Share on other sites More sharing options...
Iwantgames:) Posted February 10, 2019 Share Posted February 10, 2019 If you guys want to print up your own manual/booklet, "ADOBE ACROBAT READER DC" is THE program to use. Check out my video below to see how I make mine. I used Vorticon's new manual as my example. https://www.youtube.com/watch?v=vLEMvUksB74&feature=youtu.be Very nice! What type of printer is that? Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted February 10, 2019 Share Posted February 10, 2019 Very nice! What type of printer is that? It's an HP << MFP M477fdn >>. I've had it for about two years now. It's the best printer I've ever owned. I got sick and tired of buying new ink jet printers every 9 - 12 months and going broke feeding them. It's a little bit more expensive on the front end, but it saves a TON of money in the long run. 2 Quote Link to comment Share on other sites More sharing options...
digdugnate Posted February 10, 2019 Share Posted February 10, 2019 I have an M475dn, Omega- it's the best darned color laser MFP we've ever had. 1 Quote Link to comment Share on other sites More sharing options...
Omega-TI Posted February 10, 2019 Share Posted February 10, 2019 I have an M475dn, Omega- it's the best darned color laser MFP we've ever had. Looks like a one nice too. I could never go back to ink jet, although I do miss the ability to make water slide decals. Quote Link to comment Share on other sites More sharing options...
+save2600 Posted February 15, 2019 Share Posted February 15, 2019 I have an M475dn, Omega- it's the best darned color laser MFP we've ever had. Vowed to never purchase another HP printer again, after an update blocked the use of 3rd party toners in my machine. We have a Samsung C1860FW now, and it’s been working really well. Just wish laser printers could print to the very edge of the paper, for things like photos and covers for universal game cases. Not about to go back to inkjet just for that though. Quote Link to comment Share on other sites More sharing options...
GDMike Posted March 9, 2019 Share Posted March 9, 2019 Nice demonstration. Thank you! Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted April 26, 2019 Author Share Posted April 26, 2019 Does a good template exist for the Parker Bros. cartridge labels? Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted April 26, 2019 Share Posted April 26, 2019 I have one done up for Tutankham, if that will help. I think I pulled it from one of the threads here. . .several years ago. Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted April 26, 2019 Author Share Posted April 26, 2019 If that is for the original PB cartridge shell then I would like to have a look at it, please. Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted April 26, 2019 Share Posted April 26, 2019 (edited) If that is for the original PB cartridge shell then I would like to have a look at it, please. here you go http://atariage.com/forums/topic/254218-what-ever-happened-towith/?do=findComment&comment=3541325 i also have the Box in WIP Edited April 26, 2019 by ti99iuc 1 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted April 27, 2019 Author Share Posted April 27, 2019 here you go http://atariage.com/forums/topic/254218-what-ever-happened-towith/?do=findComment&comment=3541325 i also have the Box in WIP Grazie. Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted April 27, 2019 Share Posted April 27, 2019 One note on the PB shells. To fit an UberGROM into them, you have to do a lot of internal surgery on the case. It works perfectly in the end, but it does take a lot of careful effort. With that, you have a perfect replica of what the original would have looked like if it had been released though, so it is definitely worth it. I made a whole sheet of the labels, just to get the one I needed. . . Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted April 30, 2019 Share Posted April 30, 2019 One note on the PB shells. To fit an UberGROM into them, you have to do a lot of internal surgery on the case. It works perfectly in the end, but it does take a lot of careful effort. With that, you have a perfect replica of what the original would have looked like if it had been released though, so it is definitely worth it. I made a whole sheet of the labels, just to get the one I needed. . . I just cut off the support on the one side that interferes with the atmel.. otherwise drops right in - to a TI shell.. not a pb shell. TLDR Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted April 30, 2019 Share Posted April 30, 2019 The bump on the underside of the plastic holding the label is also an issue. It looks like it was designed for a screw hole, but wasn't used that way in the end. It is possible it was only there in some of their cases as well, so it is just something to note if you do find one like that. . . Quote Link to comment Share on other sites More sharing options...
GDMike Posted July 1, 2019 Share Posted July 1, 2019 (edited) has anyone seen the .bin or FG image of the Macro Assembler? i have it for Classic99 but i need it for Either FG or FlashRom99.. Edited July 1, 2019 by GDMike Quote Link to comment Share on other sites More sharing options...
+arcadeshopper Posted July 2, 2019 Share Posted July 2, 2019 10 hours ago, GDMike said: has anyone seen the .bin or FG image of the Macro Assembler? i have it for Classic99 but i need it for Either FG or FlashRom99.. It's the same file if it's a cartridge If it's not a cart it can't be loaded on a cart You can convert most ea5 programs to a cart that will load to 32k Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted July 7, 2019 Share Posted July 7, 2019 (edited) This is mine. We put a new label on because the other one was WAY too small. This one fits perfectly! Edited July 7, 2019 by iliketurtles 7 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted July 7, 2019 Author Share Posted July 7, 2019 You little sneak! I have been working on mine, too! I got persnickety over the image and was not able to clean up the graphics I could find, so I have actually purchased a copy from another platform to get a better image and fix up the text. Oh, and the UberGROM does not want to fit well in the cartridge, even after I removed the center post. I have it on my solder job list to remove the socket and the DIP chip on the UG board. Quote Link to comment Share on other sites More sharing options...
+Ksarul Posted July 7, 2019 Share Posted July 7, 2019 You are right about the case being a tight fit--but some careful filing on the various high points inside the case will eliminate those problems. The UberGROM in Turtles' case is socketed, as is the Flash chip. No soldering necessary once you get it right. The hardest part was getting the case open without damaging it. I had a lot of fun making that one for him. I may even do one or two more like that eventually, especially if I find more donor cartridges for an acceptable price. Quote Link to comment Share on other sites More sharing options...
ti99iuc Posted July 7, 2019 Share Posted July 7, 2019 (edited) Hey! I am happy you liked the label also Mantadoc some months ago, sent me his tutankham cartridge picture that he created using that label at least i am happy because i can see that my time was not wasted In addition i can tell that Manual and Box are work in progress :p Manual is almost finished already, i am just collect infos to complete text for the cover and internal pages... Box need more work remaining but will come soon i hope Edited July 7, 2019 by ti99iuc 2 Quote Link to comment Share on other sites More sharing options...
iliketurtles Posted July 8, 2019 Share Posted July 8, 2019 (edited) 7 hours ago, Ksarul said: I may even do one or two more like that eventually, especially if I find more donor cartridges for an acceptable price. Dude, I have a Popeye cart missing the whole label and a Q*Bert with half the label ripped off. But you don't want to destroy a Popeye cart... Edited July 8, 2019 by iliketurtles Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted July 8, 2019 Author Share Posted July 8, 2019 Yeah, I picked up a cheap Q*Bert on eBay to sacrifice for my cart. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.