AtariUser2 Posted May 26, 2018 Share Posted May 26, 2018 So, I recently purchased an Atari 2600 Jr, with Jr PAC man and no cables for £11:99. I already own an Atari 2600 woody 6 switch, in addition to 7800, and so simply just swapped it in with the cables. To my surprise, the console doesnt accept games at all, as they dont fit in the cup. In addition, the power light comes on intermittently, but does appear to work. All Im wondering is, what do I need to do fix this? Quote Link to comment Share on other sites More sharing options...
AtariUser2 Posted May 26, 2018 Author Share Posted May 26, 2018 Soon after writing this, I inspected the switches and they seem tight. Ive just given it a clean, and am about to test it again. If it works, ill say. Quote Link to comment Share on other sites More sharing options...
AtariUser2 Posted May 26, 2018 Author Share Posted May 26, 2018 The one with the line on is Jr Pac Man and the other is River Raid. This is what happens when I insert them into the Atari 2600 JR. For an update, power works now and so does video. Quote Link to comment Share on other sites More sharing options...
CRTGAMER Posted May 26, 2018 Share Posted May 26, 2018 The 2600jr and also the 7800 has a tighter slot then the older 2600 consoles. You really have to seat the carts prior to powering on. There is a mod to fix that tight slot, have care on the plastic guide while trimming so you do not damage the mother board. The 7800 plastic guide can be unscrewed underneath for the mod, but the 2600jr would require tricky desoldering so it needs done in place.Could also be dirty contacts inside, easiest route is insert cart a few times. Cleaning the contacts with alcohol and q-tip also can help, just be sure dry before plugging back in. 1 Quote Link to comment Share on other sites More sharing options...
AtariUser2 Posted May 26, 2018 Author Share Posted May 26, 2018 In the photos, the Jr has no case on, leaving just the exposed board. Ive tried cleaning ithe cartridge slot with many things, and tried many times, but I will take your suggestion and use alcohol. I dont think it is the cartridge slot though, and maybe one of the chips, like the TIA. I have no knowledge of soldering whatsoever, so I cant really fix the chips. But I do know someone who is an electrician, so I might ask him to help. But thanks for the tip! Quote Link to comment Share on other sites More sharing options...
AtariUser2 Posted May 26, 2018 Author Share Posted May 26, 2018 UPDATE: It smoked, and it stopped getting a little before that. I think its dead, or the capacitor exploded. Quote Link to comment Share on other sites More sharing options...
ApolloBoy Posted May 27, 2018 Share Posted May 27, 2018 Can we get detailed pics of the board? Also what power supply are you using? 1 Quote Link to comment Share on other sites More sharing options...
AtariUser2 Posted May 27, 2018 Author Share Posted May 27, 2018 I cant really get detailed pictures of the board at the moment, and im using a power supply which I purchased from a shop that is quite reputable, and use with my woody 6 switch light sixer. The power supply is fine, and when i bought it the seller said it wouldnt work as it was untested. What happened with it smoking is that the bard was apart, not plugged in, and suddenly smoke erupted from it, and it stopped getting power a bit before that. Now it is just sat downstairs, in a cupboard. Ive been leaving it to cool down, as some of the chips and the main capacitor were hot, and reassembled it. Quote Link to comment Share on other sites More sharing options...
AtariUser2 Posted May 29, 2018 Author Share Posted May 29, 2018 When I say that the seller said it wouldnt work as it is untested, Im referring to the Atari 2600 JR, and not the power supply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.