oracle_jedi Posted July 19, 2018 Share Posted July 19, 2018 I wanted to create a cable to connect my Amigas to my Atari SC1224 color monitor. I found a few forum posts on the issue: http://eab.abime.net/showthread.php?t=80003 http://www.atari-forum.com/viewtopic.php?t=30991 http://atariage.com/forums/topic/189852-how-to-find-a-good-amiga-500/ But nothing with the actual schematic. It should be straightforward, but the poster in the English Amiga Board post stated he was having problems, and someone suggested taping the CSYNC line instead. Anyway, I made a cable with a simple RGBHV and GND connection from the Amiga to the SC1224 and it works beautifully. I added audio too by tying left and right audio together and feeding them to pin 1 of the Atari monitor. Here is the schematic: And here are some results: I figured I would add this here for anyone else wondering if there is some weird magic to connecting an SC1224 to an Amiga. There isn't. The only surprise was that the original Amiga RGB video cable I tried to use as a donor does not carry HSYNC and VSYNC at all. I has to sacrifice an Amigakit RGB to SCART cable in the end too. So far at least though it works great and looks beautiful. Graham 6 Quote Link to comment Share on other sites More sharing options...
+OLD CS1 Posted July 23, 2018 Share Posted July 23, 2018 That looks great. Nicely done. Finally, something useful to do with those Atari monitors. 1 Quote Link to comment Share on other sites More sharing options...
Nebulon Posted August 10, 2018 Share Posted August 10, 2018 Congrats. That looks great! I guess it's a bit too late to send this (page 16): https://www.tpug.ca/tpug-media/tpugmag/TPUG_Issue_22_1986_Apr.pdf 1 Quote Link to comment Share on other sites More sharing options...
+save2600 Posted August 11, 2018 Share Posted August 11, 2018 Nice! Now just need to adjust the horizontal and vertical width to fill and center the screen. Quote Link to comment Share on other sites More sharing options...
imstarryeyed Posted September 7, 2018 Share Posted September 7, 2018 (edited) That is a great mod! If anyone here has any RGB monitors, I recommend go though the trouble and convert them to a Female SCART RGB plug and play all of your consoles and computers on those monitors.. If you have an Amiga or Atari or Apple IIGS monitor buy a female SCART plug and wire it in, you will not regret it! Sega Saturn, PS1, SNES, Sega Genesis look amazing in an RGB monitor! Member of the CRT Master Race and always welcoming more.. Don't accept Diet Scanlines! Haha Edited September 7, 2018 by imstarryeyed Quote Link to comment Share on other sites More sharing options...
jmprice_314159 Posted July 23, 2023 Share Posted July 23, 2023 Hello fellows, might any helpful fellow here be able to assist a solder-challenged fellow? I'd really like a cable that can accept SCART and output to the Atari SC1224 so I can connect my various computers and consoles. I can pay a fellow for his efforts. I live in the USA. Thanks, Jason. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.