+Nezgar Posted October 8, 2018 Share Posted October 8, 2018 I wonder if CP/M still works with the hacked "1.2X" ROM from BEST? http://atariage.com/forums/topic/115434-new-indus-gt-firmware/?p=4129283 ROM version 01.00 There may be a tone sound (might be a bell sound). More of a click than tone. SIO drive D1: and 800XL with SpartaDos 32f diskette. Please dump and share that v1.0 ROM. We have 1.1, 1.2, and the hacked 1.2X, but 1.0 is still missing / never been archived. Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted October 8, 2018 Share Posted October 8, 2018 and where is 1.3X? Quote Link to comment Share on other sites More sharing options...
Kyle22 Posted October 14, 2018 Share Posted October 14, 2018 (edited) and where is 1.3X? It's really 1.2 improved. I wish they hadn't taken out the beep from the buttons. That is CONFIRMATION for me. In the source, it's labelled BEP. Look for where CALL BEP was removed and replace it at the appropriate place. I like the faster spin down, but not much. I really don't think the Indus is really badly behaved at all. My only issue with it is the SUPERSYNC that I fixed in the ONE and OLNY version of SDX4.23. !!! If you boot DOSXL 2.35i and program the drive, it would work SOMETIMES in SDX 4.22 The Track Buffering RAMCharger version caused the most lock-up problem (sometimes press BREAK will get you past it). I don't remember nw what I did, but it IS in the Z80 code of SuperSync that I added an extra NOP or 2 to affect the Bit-Bang cycle time. I am SO SORRY that I don't remember the exact details. I know this is possible! Even faster speeds are really possible. Come on, Z-80 guys help This could be LIGHT YEARS ahead of Happy, Archiver, BitWriter or anything. Now, when I run Zork or WordStar from a RespeQt SIO drive locked to 19200, If I play Zork FAST, it works. If you let time out at all ( there is NO indication ) of how long you can wait. I normally don't cross post, but this goes to RespeQt as well. Edit: Dumb ass ME made that SDX INDUS.SYS that works with RAMCharger. At full Sync+ speed.. Sucks that I lost it. This should only take a good hacker a short time to figure this out. It just HIT me one day when looking over the SuperSync source code.\ I'm burned out (read my comment in the BBS thread) and don't have all my CP/M equipment any more to do the Z80 stuff. Oh, I wish I did... Edited October 14, 2018 by Kyle22 3 Quote Link to comment Share on other sites More sharing options...
_The Doctor__ Posted October 14, 2018 Share Posted October 14, 2018 (edited) hey, speaking of speed, could you bump the respeqt speed up to indus speed, I could be wrong but I always thought the idea was to use the higher speed to allow the terminal and disk drives to bop around and have it happen at a pace people could handle and be used to... does the indus do any talk back to acknowledge it should or shouldn't be in high speed mode... just thinking about ideas had over time more than likely what speeds would be possible feeding the terminal and drives at the same time... possibly interleaved sio so to speak. Edited October 14, 2018 by _The Doctor__ Quote Link to comment Share on other sites More sharing options...
jvas Posted May 3, 2019 Share Posted May 3, 2019 I'm after this one? Has any left for sale? Thanks! 1 Quote Link to comment Share on other sites More sharing options...
+tf_hh Posted May 3, 2019 Author Share Posted May 3, 2019 I'm after this one? Has any left for sale? Thanks! I´ve some in stock. Just take a look here 2 Quote Link to comment Share on other sites More sharing options...
+tf_hh Posted June 1, 2019 Author Share Posted June 1, 2019 Please dump and share that v1.0 ROM. We have 1.1, 1.2, and the hacked 1.2X, but 1.0 is still missing / never been archived. Just for the records: The "hacked" V1.2 won´t be recognized by the Indus CP/M tool V0.4 from trub. It displays: "NOT an Indus/LDW/CA drive !" when this firmware is used - not dependent if the standard RAM is active or a (S)RAM-Charger is plugged in. So if you want to check your (S)RAM-Charger, it´s better to use the official V1.2 firmware. 2 Quote Link to comment Share on other sites More sharing options...
scitari Posted June 20, 2021 Share Posted June 20, 2021 Thanks for all the posts on this thread! I completed Jürgen's SRAM Charger installation and was able to follow his instructions posted above to boot into CP/M. Here are my posts documenting this. SRAM Charger installation Booting CP/M 2 1 Quote Link to comment Share on other sites More sharing options...
Sugarland Posted June 21, 2021 Share Posted June 21, 2021 (edited) 23 hours ago, scitari said: Thanks for all the posts on this thread! I completed Jürgen's SRAM Charger installation and was able to follow his instructions posted above to boot into CP/M. Here are my posts documenting this. SRAM Charger installation Booting CP/M Thank you. Do you know where to get compatible CP/M software? I spent a few hours looking and could not find much CP/M software at all. c128 utilities.zip Edited June 21, 2021 by Sugarland Quote Link to comment Share on other sites More sharing options...
scitari Posted July 18, 2021 Share Posted July 18, 2021 (edited) There is readily available software for CP/M out there. The trick is getting them on an Atari disk. Instructions are provided at the end of this page. e.g. here is a CP/M archive Edited July 18, 2021 by scitari added link 2 Quote Link to comment Share on other sites More sharing options...
tschak909 Posted July 20, 2021 Share Posted July 20, 2021 On 7/18/2021 at 1:35 PM, scitari said: There is readily available software for CP/M out there. The trick is getting them on an Atari disk. Instructions are provided at the end of this page. e.g. here is a CP/M archive This is one big advantage of the CP/M implementation on the #Fujinet, put the files in directories labeled for the drive and user, on the FAT32 SD card, boom, done. -Thom 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.