Relicgamer Posted February 28, 2020 Share Posted February 28, 2020 Worse case scenario you can get the remote and use it. Not great by any means but will allow you to mess around with it. They are cheap on Ebay Quote Link to comment Share on other sites More sharing options...
Relicgamer Posted March 10, 2020 Share Posted March 10, 2020 On 2/27/2020 at 3:53 PM, ciderman said: Is this controller PCB still available or all gone at this stage? I've a 501 on the way with no controller and need a way to play T3k! Sadly the only way is to use the remote. And check Ebay for the controllers daily im not kidding. I had the same problem. Picked up a Toshiba unit and couldn't find any controllers. 2 weeks later someone had one come up on Ebay on auction. And it was going to be about 200 when it finished. So I waited and to my luck 2 came up for sale new in original packaging. 1 sold quick it was the 1 that looked like the n64 controller and the other I bought was the logitech. I paid 100 plus shipping. Just keep looking. And they come up. Quote Link to comment Share on other sites More sharing options...
fandenivoldsk Posted May 11, 2020 Share Posted May 11, 2020 Anyone who knows if these will be made for sale again? 1 Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted May 28, 2020 Share Posted May 28, 2020 @coleshores and @eltoozero, what ever became of this project? Sounds like there has been a lot of interest of late but no follow-up from you two? I'm not pointing fingers at all, just curious what's up. Cheers. Edit: I see neither of those two individuals have logged in to AtariAge since fall and summer of 2019, respectively. Bummer. Quote Link to comment Share on other sites More sharing options...
doctorclu Posted May 28, 2020 Share Posted May 28, 2020 47 minutes ago, sixersfan105 said: @coleshores and @eltoozero, what ever became of this project? Sounds like there has been a lot of interest of late but no follow-up from you two? I'm not pointing fingers at all, just curious what's up. Cheers. Edit: I see neither of those two individuals have logged in to AtariAge since fall and summer of 2019, respectively. Bummer. Sending a PM to you on this. 1 Quote Link to comment Share on other sites More sharing options...
+Stephen Posted May 28, 2020 Share Posted May 28, 2020 12 minutes ago, doctorclu said: Sending a PM to you on this. Can you possibly forward to me as well? I never was able to get a rotary from the original batch. Quote Link to comment Share on other sites More sharing options...
fandenivoldsk Posted May 29, 2020 Share Posted May 29, 2020 11 hours ago, doctorclu said: Sending a PM to you on this. Thanks! Let's hope it is still possible! Quote Link to comment Share on other sites More sharing options...
MAYAman Posted May 29, 2020 Share Posted May 29, 2020 13 hours ago, doctorclu said: Sending a PM to you on this. Same, I’m looking for this controller. Thanks Quote Link to comment Share on other sites More sharing options...
CrazyChris Posted May 29, 2020 Share Posted May 29, 2020 Tempest 3000 is my favorite version of this game. Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted May 29, 2020 Share Posted May 29, 2020 When @doctorclu said "sending you a PM on this," he was just updating me on the fact that the guys behind this project have been MIA for over a year. I wouldn't get your hopes up! Quote Link to comment Share on other sites More sharing options...
doctorclu Posted May 29, 2020 Share Posted May 29, 2020 7 hours ago, sixersfan105 said: When @doctorclu said "sending you a PM on this," he was just updating me on the fact that the guys behind this project have been MIA for over a year. I wouldn't get your hopes up! Well, how to get ahold of them through email. Suggesting for people to give that a try. 2 Quote Link to comment Share on other sites More sharing options...
fandenivoldsk Posted May 30, 2020 Share Posted May 30, 2020 I think we should all just show our interest in getting one if there’s a second run. Maybe the seller will notice. Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted May 30, 2020 Share Posted May 30, 2020 5 hours ago, fandenivoldsk said: I think we should all just show our interest in getting one if there’s a second run. Maybe the seller will notice. I tried emailing; we shall see. Can't hurt. Quote Link to comment Share on other sites More sharing options...
Relicgamer Posted May 30, 2020 Share Posted May 30, 2020 19 minutes ago, sixersfan105 said: I tried emailing; we shall see. Can't hurt. I did speak with the guy that did the YouTube video that made these. If I remember correctly he cant make them without the chip that nuon used in the controllers. And it seemd like he didnt have any or need to create more. So its more about the person that did the chips that the guy that males the controller. Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted May 30, 2020 Share Posted May 30, 2020 1 minute ago, Relicgamer said: I did speak with the guy that did the YouTube video that made these. If I remember correctly he cant make them without the chip that nuon used in the controllers. And it seemd like he didnt have any or need to create more. So its more about the person that did the chips that the guy that males the controller. If you're talking about Nick P, I'm not referring to him. I'm referring to the guy that makes the boards with the chip on them. Believe his name is Lee. Quote Link to comment Share on other sites More sharing options...
Relicgamer Posted May 30, 2020 Share Posted May 30, 2020 18 minutes ago, sixersfan105 said: If you're talking about Nick P, I'm not referring to him. I'm referring to the guy that makes the boards with the chip on them. Believe his name is Lee. Well yes thats what I mean. I believe it was Nick that told me that they were all out of the chips. And till they got more he couldn't make any more controllers. Im not sure what the process is to getting more made. But maybe if we can get enough people onboard we could get the other guy to make the chips Quote Link to comment Share on other sites More sharing options...
fandenivoldsk Posted May 30, 2020 Share Posted May 30, 2020 At least we are six or seven people who have shown interest in this tread so far. I am sure we could double this Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted May 31, 2020 Share Posted May 31, 2020 9 hours ago, Relicgamer said: But maybe if we can get enough people onboard we could get the other guy to make the chips I had read elsewhere (perhaps somewhere on AA or similar) that Lee has enough chips "for a lifetime," so that's apparently not a concern, which is a good thing! 9 hours ago, fandenivoldsk said: At least we are six or seven people who have shown interest in this tread so far. I am sure we could double this Agreed. We just need the developer to return to AA and/or respond to emails. Quote Link to comment Share on other sites More sharing options...
Relicgamer Posted May 31, 2020 Share Posted May 31, 2020 8 minutes ago, sixersfan105 said: I had read elsewhere (perhaps somewhere on AA or similar) that Lee has enough chips "for a lifetime," so that's apparently not a concern, which is a good thing! Agreed. We just need the developer to return to AA and/or respond to emails. Wonder if Nick can have better luck contacting lee Quote Link to comment Share on other sites More sharing options...
Ty M. Posted June 1, 2020 Share Posted June 1, 2020 21 hours ago, Relicgamer said: Wonder if Nick can have better luck contacting lee Just found this thread and wanted to share that I am also interested in purchasing a rotary controller for the Nuon. If these were to be built and sold again I'd definitely purchase 2 of them. Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted June 6, 2020 Share Posted June 6, 2020 Good news to report: Nick P (controller maker and I believe original designer of the boards who passed off the board project to Lee) informed me that he emailed with Lee yesterday and Lee plans on "digging back in [to this project] soon!" Further, the Rev2 Yak Twister board will be capable of all three control modes simultaneously (digital d-pad, analog stick and rotary)!! The limited run of Rev1 last year was apparently limited to one mode with a jumper to determine the mode. Very exciting stuff!! I'll keep my ear to the ground and will report back any further developments. 7 Quote Link to comment Share on other sites More sharing options...
+Stephen Posted June 6, 2020 Share Posted June 6, 2020 1 hour ago, sixersfan105 said: Good news to report: Nick P (controller maker and I believe original designer of the boards who passed off the board project to Lee) informed me that he emailed with Lee yesterday and Lee plans on "digging back in [to this project] soon!" Further, the Rev2 Yak Twister board will be capable of all three control modes simultaneously (digital d-pad, analog stick and rotary)!! The limited run of Rev1 last year was apparently limited to one mode with a jumper to determine the mode. Very exciting stuff!! I'll keep my ear to the ground and will report back any further developments. Awesome! Thanks - I sure hope I can get in on this run. 1 Quote Link to comment Share on other sites More sharing options...
+sixersfan105 Posted July 10, 2020 Share Posted July 10, 2020 A little update to pass along: Nick P. got an email from Lee O. three days ago, which stated that Lee anticipates the Rev2 Yak Twister boards will be coming "in a few months." I know that's a bit of a non-update compared to the last update of similar substance, but it's something. I recommend joining the "NUON DVD users" Facebook group for a direct line to Nick P. It's a very small group but all are welcome! 3 Quote Link to comment Share on other sites More sharing options...
nicolaspersijn Posted July 11, 2020 Share Posted July 11, 2020 On 6/6/2020 at 2:16 AM, sixersfan105 said: Good news to report: Nick P (controller maker and I believe original designer of the boards who passed off the board project to Lee) informed me that he emailed with Lee yesterday and Lee plans on "digging back in [to this project] soon!" Further, the Rev2 Yak Twister board will be capable of all three control modes simultaneously (digital d-pad, analog stick and rotary)!! The limited run of Rev1 last year was apparently limited to one mode with a jumper to determine the mode. Very exciting stuff!! I'll keep my ear to the ground and will report back any further developments. Definitely very exciting. Can wait to get creative with some interesting nuon controller mods. Just to clear something up though. I didn’t design anything. I tried my best, but hit a wall. The most I did was stockpile documentation and hardware. The rest was all Lee. 1 Quote Link to comment Share on other sites More sharing options...
fandenivoldsk Posted July 12, 2020 Share Posted July 12, 2020 Is everything included with the Yak Twister board or is it needed to get an original Nuon controller to scrape for parts? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.